Skip to the content
4 layers38.7 × 18.4 mmDac pmod, the printed circuit board in 3D

This is a 4-channel sigma-delta DAC PMOD. This provides an RC-filtered and op-amp buffered output for a sigma delta modulator.

Size
38.7 × 18.4 mm
Copper layers
4
Thickness
1.6 mm
Parts
14
Nets
18
Pads
52
Tracks, vias
48, 8
Pours
4
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
10 Oct 2021
Updated
21 Oct 2021

Overview

Dac pmod is an open-source printed circuit board by mobilinkd, from the mobilinkd/dac-pmod repository on GitHub. It is a 4-layer board of 38.7 × 18.4 mm with 14 parts on 18 nets, routed with 48 tracks and 8 vias.

It is built around the MCP6004-E/P. Its parts include 5 capacitors, 4 resistors, 2 connectors and 1 IC. It belongs with the audio and music boards of this library.

Main components

1

README

README.md

DAC PMOD

This is a 4-channel sigma-delta DAC PMOD. This provides an RC-filtered and op-amp buffered output for a sigma delta modulator.

The resistor and capacitor values are not specified. The expectation is that users will have their own requirements for the filter cut-off.

When calculating the component values for the cut-off frequency of the RC filter, bear in mind that a 200 ohm series resistor exists on each PMOD signal line.

This repo contains KiCAD files and Gerbers for those wanting to make their own boards.

This project is OSHW (Open Source Hardware), released under the GPLv3 license.

dac_pmod.png

If you are interested in purchasing kits or complete modules, please contant me at rob@mobilinkd.com.

Parts

14
QtyValueFootprintReferences
4CCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC2, C3, C4, C5
4RResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR1, R2, R3, R4
1100nFCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC1
1Conn_02x04_Odd_EvenConnector_PinHeader_2.54mm:PinHeader_2x04_P2.54mm_VerticalJ2
1Conn_02x06_Top_BottomConnector_PinHeader_2.54mm:PinHeader_2x06_P2.54mm_HorizontalJ1
1LOGOdac_pmod:Mobilinkd_LogoG1
1MCP6004Package_DIP:DIP-14_W7.62mm_SocketU1

The 13 most common of 14 parts.

Similar boards

  • 4 layers70.8 × 108 mmCastor and Pollux, the printed circuit board in 3D

    Castor and Pollux

    wntrblm/Castor_and_Pollux

    A Juno-inspired dual oscillator

    235 parts587
  • 4 layers60 × 94 mmDaisySeedPedal125b, the printed circuit board in 3D

    DaisySeedPedal125b

    bkshepherd/DaisySeedProjects

    A collection of hardware and software projects based around the Electro-Smith Daisy Seed

    80 parts559MIT
  • 2 layers75 × 100 mmPhased, the printed circuit board in 3D

    Phased

    Neumi/open_echo

    Open Source echo sounder / depth sounder / SONAR for bathymetry and research. Arduino based and compatible.

    77 parts530
  • 2 layers66 × 99 mmNucleo32TNC, the printed circuit board in 3D

    Nucleo32TNC

    mobilinkd/NucleoTNC

    The Nucleo TNC is a breadboard implementation of the Mobilinkd TNC3 using a STM32L432KC Nucleo32 board. This TNC faithfully implements the audio section and EEPROM storage of the TNC3.

    54 parts110GPL-3.0
  • 2 layers171.5 × 106.7 mmSequencer, the printed circuit board in 3D

    Sequencer

    westlicht/performer-hardware

    PER|FORMER Eurorack Sequencer - Hardware Design Files

    435 parts110
  • 4 layers29 × 20.9 mmWideband controller, the printed circuit board in 3D

    Wideband controller

    mck1117/wideband

    The firmware/boards directory contains configuration for each board this firmware supports.

    60 parts81MIT
  • 2 layers248.9 × 120.7 mm16nx, the printed circuit board in 3D

    16nx

    16n-faderbank/16nx

    16nx is a controller for musical instruments. Sixteen faders,MIDI over USB and jack, CV out, and I2C out. Based around RP2040.

    171 parts76

Questions

How big is the Dac pmod PCB?

It measures 38.7 × 18.4 mm and has 4 copper layers, 1.6 mm thick.

What parts does the Dac pmod use?

14 parts, built around the MCP6004-E/P. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Dac pmod KiCad files?

From the mobilinkd/dac-pmod repository on GitHub, at the commit this page was made from: the board is dac_pmod.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Dac pmod design in my own project?

Its repository states no licence, so its author keeps all rights: ask mobilinkd before reusing the design.