2 layers52 × 53 mm
2 layers174 × 122 mm
STM32 shield panel
mnk/IDASTM32HandOnSeminar om Embedded C Programming på STM32
- Size
- 174 × 122 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 387
- Nets
- 210
- Pads
- 759
- Tracks, vias
- 564, 12
- Pours
- 12
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 29 May 2024
- Updated
- 29 May 2024
Overview
STM32 shield panel is an open-source printed circuit board by mnk, from the mnk/IDASTM32HandOn repository on GitHub. It is a 2-layer board of 174 × 122 mm with 387 parts on 210 nets, routed with 564 tracks and 12 vias.
It is built around the WS2812B. Its parts include 42 connectors, 24 diodes, 18 capacitors, 12 resistors and 6 ICs. It belongs with the STM32 boards of this library.
Main components
1README
README.mdPå dette seminar vil vi sætte dig i gang med STM32. Vi ser på de værktøjer, du skal bruge for at komme i gang. Det hele er gratis, så det er bare med at komme i gang. Vi gennemgår alle basale hardwaredele, så du nemt kan komme videre. Der bliver nogle hands-on-opgaver, så tag din bærbare computer med.
Agenda
- Grafisk opsætning
- Debugger
- Seriel kommunikation (uart)
- SPI
- Timer
- ADC
- USB (virtuel comport)
Parts
387| Qty | Value | Footprint | References |
|---|---|---|---|
| 243 | NPTH | NPTH | KiKit_MB_10_1, KiKit_MB_10_2, KiKit_MB_10_3, KiKit_MB_10_4, KiKit_MB_11_1, KiKit_MB_11_2, KiKit_MB_11_3, KiKit_MB_11_4, KiKit_MB_12_1, KiKit_MB_12_2, KiKit_MB_12_3, KiKit_MB_12_4, KiKit_MB_13_1, KiKit_MB_13_2, KiKit_MB_13_3, KiKit_MB_13_4 +227 |
| 24 | WS2812B | LED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D1, D1, D1, D1, D1, D1, D2, D2, D2, D2, D2, D2, D3, D3, D3, D3 +8 |
| 18 | 100nF | Capacitor_SMD:C_0805_2012Metric | C1, C1, C1, C1, C1, C1, C2, C2, C2, C2, C2, C2, C3, C3, C3, C3 +2 |
| 18 | 10k | Potentiometer_THT:Potentiometer_Runtron_RM-065_Vertical | RV1, RV1, RV1, RV1, RV1, RV1, RV2, RV2, RV2, RV2, RV2, RV2, RV3, RV3, RV3, RV3 +2 |
| 12 | 10k | Resistor_SMD:R_0805_2012Metric | R1, R1, R1, R1, R1, R1, R2, R2, R2, R2, R2, R2 |
| 12 | MountingHole_3.2mm | Arduino_MountingHole:MountingHole_3.2mm | MH3, MH3, MH3, MH3, MH3, MH3, MH4, MH4, MH4, MH4, MH4, MH4 |
| 12 | Neopixel | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J5, J5, J5, J5, J5, J5, J7, J7, J7, J7, J7, J7 |
| 6 | Analog | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J3, J3, J3, J3, J3, J3 |
| 6 | Digital/PWM | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J4, J4, J4, J4, J4, J4 |
| 6 | Digital/PWM | Connector_PinSocket_2.54mm:PinSocket_1x10_P2.54mm_Vertical | J2, J2, J2, J2, J2, J2 |
| 6 | Fiducial | Fiducial | KiKit_FID_B_1, KiKit_FID_B_2, KiKit_FID_B_3, KiKit_FID_T_1, KiKit_FID_T_2, KiKit_FID_T_3 |
| 6 | Jumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1, JP1, JP1, JP1, JP1, JP1 |
| 6 | Power | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J1, J1, J1, J1, J1, J1 |
| 6 | PowerIn | Connector_Phoenix_MSTB:PhoenixContact_MSTBVA_2,5_2-G_1x02_P5.00mm_Vertical | J6, J6, J6, J6, J6, J6 |
| 6 | TMP102xxDRL | Package_TO_SOT_SMD:SOT-563 | U1, U1, U1, U1, U1, U1 |
More from mnk/IDASTM32HandOn
1Similar boards
- 4 layers99 × 53.3 mm
PSLab
fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io
199 parts1.7kApache-2.0 - 2 layers26 × 30 mm
Microcontroller
FrameworkComputer/ExpansionCards
Reference designs and documentation to create Expansion Cards for the Framework Laptop
34 parts1.1kCC-BY-4.0 - 4 layers82.6 × 82.5 mm
- 2 layers95.3 × 161.9 mm
- 2 layers42.8 × 28.8 mm
MM Skirt
PrintersForAnts/Micron
If you want to purchase full kits there are 3 available (Kits are slowly updating to R1 hardware just make sure to double check the included hardware in your kit and if you have any questions reach out in the discord)
11 parts741GPL-3.0 - 2 layers149.6 × 127.1 mm
- 2 layers285.5 × 95 mm
- 2 layers177.7 × 144.5 mm
Questions
How big is the STM32 shield panel PCB?
It measures 174 × 122 mm and has 2 copper layers, 1.6 mm thick.
What parts does the STM32 shield panel use?
387 parts, built around the WS2812B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the STM32 shield panel KiCad files?
From the mnk/IDASTM32HandOn repository on GitHub, at the commit this page was made from: the board is STM32_shield/STM32_shield_panel.kicad_pcb and its schematic STM32_shield/STM32_shield.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the STM32 shield panel design in my own project?
Its repository states no licence, so its author keeps all rights: ask mnk before reusing the design.