Skip to the content
2 layers59.8 × 59.5 mmStatusLight, the printed circuit board in 3D

Simple circuit board to light up a NeoPixel status light

Size
59.8 × 59.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
15
Nets
9
Pads
64
Tracks, vias
54, 2
Pours
2
Routed
Yes
KiCad
KiCad 4
Created
16 Aug 2017
Updated
16 Aug 2017

Overview

StatusLight is an open-source printed circuit board by mlynxatwork, from the mlynxatwork/StatusLight repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 59.8 × 59.5 mm with 15 parts on 9 nets, routed with 54 tracks and 2 vias.

It is built around the ATTINY85-20PU. Its parts include 6 switches, 2 connectors and 1 IC. It belongs with the AVR (ATmega, ATtiny) boards of this library.

Main components

1

README

README.md

StatusLight

Simple circuit board to light up a NeoPixel status light

Parts

15
QtyValueFootprintReferences
6RResistors_SMD:R_0805_HandSoldering10K1, 10K2, 10K3, 10K4, 10K5, 10K6
6SW_PushKeyboard:CHERRY_PCB_100HSW1, SW2, SW3, SW4, SW5, SW6
1ATTINY85-20PUHousings_DIP:DIP-8_W7.62mm_LongPadsU1
1Audio-Jack-3SJ1-352X:SJ1-352XNJ1
1USB_OTGConnectors:USB_Micro-BJ2

More from mlynxatwork/StatusLight

2
  • 2 layers59.8 × 59.5 mmStatusLight THT, the printed circuit board in 3D

    StatusLight THT

    mlynxatwork/StatusLight

    Simple circuit board to light up a NeoPixel status light

    16 partsGPL-3.0
  • 2 layers59.8 × 59.5 mmStatusLight Matias, the printed circuit board in 3D

    StatusLight Matias

    mlynxatwork/StatusLight

    Simple circuit board to light up a NeoPixel status light

    15 partsGPL-3.0

Similar boards

  • 2 layers30.7 × 76.1 mmRepeater v2, the printed circuit board in 3D

    Repeater v2

    plusvic/simplebus2-intercom

    General description of the Simplebus2 protocol used by some Comelit's intercoms. Hardware for retransmitting Simplebus2 messages over UART.

    17 parts95CC0-1.0
  • 2 layers101.5 × 54 mmSimkarte, the printed circuit board in 3D

    Simkarte

    osmocom/osmocom-analog

    Software Implementation of analog cellular telephony systems like NMT, TACS, IMTS, A/B/C-Netz; mirror of https://gitea.osmocom.org/cellular-infrastructure/osmocom-analog

    15 parts32GPL-3.0
  • 2 layers76.2 × 50.8 mmJerboa-8, the printed circuit board in 3D

    Jerboa-8

    strickyak/jerboa-attiny85-mod-synth

    Modular Synthesizer using an ATtiny85 chip for each module.

    23 parts31MIT
  • 2 layersCastVolumeKnob, the printed circuit board in 3D

    CastVolumeKnob

    WebmasterTD/CastVolumeKnob

    Hardware Volume Knob for Google Cast devices

    18 parts25
  • 2 layers55.9 × 55.9 mmPrintplaat, the printed circuit board in 3D

    Printplaat

    floriaanpost/wonderfoon

    Een nieuwe implementatie van de wonderfoon

    14 parts24
  • 2 layers71.1 × 40.6 mmTiny blinky, the printed circuit board in 3D

    Tiny blinky

    Hack-a-Day/Remoticon_KiCad_Blender

    support files for the 2020 Remoticon KiCad to Blender > PCB renders workshop

    21 parts22
  • 2 layers242 × 60 mmRoothubs, the printed circuit board in 3D

    Roothubs

    gkiefer/home2l

    The Home2Ls - Smart Tools for a Private Home

    178 parts21

Questions

How big is the StatusLight PCB?

It measures 59.8 × 59.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the StatusLight use?

15 parts, built around the ATTINY85-20PU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the StatusLight KiCad files?

From the mlynxatwork/StatusLight repository on GitHub, at the commit this page was made from: the board is StatusLight/StatusLight.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the StatusLight design in my own project?

Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).