
StatusLight Matias
mlynxatwork/StatusLight
Simple circuit board to light up a NeoPixel status light

Simple circuit board to light up a NeoPixel status light
StatusLight THT is an open-source printed circuit board by mlynxatwork, from the mlynxatwork/StatusLight repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 59.8 × 59.5 mm with 16 parts on 9 nets, routed with 65 tracks and 1 via.
It is built around the ATTINY85-20PU. Its parts include 6 switches, 2 connectors and 1 IC. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Simple circuit board to light up a NeoPixel status light
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | R | Resistors_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | 10K1, 10K2, 10K3, 10K4, 10K5, 10K6 |
| 6 | SW_Push | Keyboard:CHERRY_PCB_100H | SW1, SW2, SW3, SW4, SW5, SW6 |
| 1 | ATTINY85-20PU | Housings_DIP:DIP-8_W7.62mm_LongPads | U1 |
| 1 | Audio-Jack-3 | SJ1-352X:SJ1-352XN | J1 |
| 1 | LOGO | SJ1-352X:gyro_logo | G*** |
| 1 | USB_OTG | Connectors:USB_Mini-B | J2 |

mlynxatwork/StatusLight
Simple circuit board to light up a NeoPixel status light

mlynxatwork/StatusLight
Simple circuit board to light up a NeoPixel status light

bwack/C64-Switchless-Multi-Kernal-27C256-adapter
Kernal switcher for the C64/C64C/C128

plusvic/simplebus2-intercom
General description of the Simplebus2 protocol used by some Comelit's intercoms. Hardware for retransmitting Simplebus2 messages over UART.

osmocom/osmocom-analog
Software Implementation of analog cellular telephony systems like NMT, TACS, IMTS, A/B/C-Netz; mirror of https://gitea.osmocom.org/cellular-infrastructure/osmocom-analog

strickyak/jerboa-attiny85-mod-synth
Modular Synthesizer using an ATtiny85 chip for each module.


Hack-a-Day/Remoticon_KiCad_Blender
support files for the 2020 Remoticon KiCad to Blender > PCB renders workshop

It measures 59.8 × 59.5 mm and has 2 copper layers, 1.6 mm thick.
16 parts, built around the ATTINY85-20PU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the mlynxatwork/StatusLight repository on GitHub, at the commit this page was made from: the board is StatusLight/StatusLight-THT.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).