2 layers65 × 56 mm
2 layers30 × 30 mm
STEPBUBODC01
mlab-modules/STEPBUBODC01Buck-boost convertor TSP631000
- Size
- 30 × 30 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 23
- Nets
- 10
- Pads
- 59
- Tracks, vias
- 34, 6
- Pours
- 5
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 12 Jan 2023
- Updated
- 4 Oct 2023
Overview
STEPBUBODC01 is an open-source printed circuit board by mlab-modules, from the mlab-modules/STEPBUBODC01 repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 30 × 30 mm with 23 parts on 10 nets, routed with 34 tracks and 6 vias.
Its parts include 5 resistors, 3 capacitors, 3 connectors, 1 IC and 1 diode. It belongs with the power boards of this library.
README
README.mdParts
23| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole_Pad | Mlab_Mechanical:MountingHole_3mm | H1, H2, H3, H4 |
| 3 | HEADER_2x03_PARALLEL | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J2, J5, J6 |
| 2 | 1k | Resistor_SMD:R_0805_2012Metric | R4, R5 |
| 2 | Fiducial | Fiducial:Fiducial_1mm_Mask2mm | FID1, FID2 |
| 2 | Jumper_2_Open | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP1, JP2 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric | C3 |
| 1 | 1uH - DFE252012P-1R0M=P2 | Inductor_SMD:L_1008_2520Metric | L1 |
| 1 | 22uF | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | 47uF | Capacitor_SMD:C_0805_2012Metric | C2 |
| 1 | 511k | Resistor_SMD:R_0805_2012Metric | R2 |
| 1 | 806k | Resistor_SMD:R_0805_2012Metric | R3 |
| 1 | 91k | Resistor_SMD:R_0805_2012Metric | R1 |
| 1 | HEADER_1x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | JP4 |
| 1 | M4 | Diode_SMD:D_SMA | D1 |
| 1 | TPS631000DRLR | Mlab_IO:TPS631000 | U1 |
Questions
How big is the STEPBUBODC01 PCB?
It measures 30 × 30 mm and has 2 copper layers, 1.6 mm thick.
What parts does the STEPBUBODC01 use?
23 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the STEPBUBODC01 KiCad files?
From the mlab-modules/STEPBUBODC01 repository on GitHub, at the commit this page was made from: the board is hw/sch_pcb/STEPBUBODC01.kicad_pcb and its schematic hw/sch_pcb/STEPBUBODC01.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the STEPBUBODC01 design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers14 × 100 mm
Yunomi
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
23 parts3kApache-2.0 - 2 layers50.8 × 52.2 mm
- 2 layers138.8 × 89.8 mm
- 2 layers32.9 × 53.3 mm
- 2 layers35.5 × 50 mm
- 2 layers19 × 19 mm
- 2 layers88.5 × 28 mm
ExpBreakout
Duet3D/Duet-2-Hardware
The KiCAD source for the Duet 3d printer controller see www.duet3d.com
23 parts258