2 layers45 × 45 mm
2 layers12 × 27 mm
Sensor B
mkramar/dizzyrobot13- Size
- 12 × 27 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 3
- Nets
- 6
- Pads
- 28
- Tracks, vias
- 68, 6
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 13 Mar 2017
- Updated
- 14 Mar 2020
Overview
Sensor B is an open-source printed circuit board by mkramar, from the mkramar/dizzyrobot repository on GitHub. It is a 2-layer board of 12 × 27 mm with 3 parts on 6 nets, routed with 68 tracks and 6 vias.
Its parts include 1 capacitor, 1 IC and 1 connector. It belongs with the sensors and measurement boards of this library.
Parts
3| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | CONN_01X06 | Dizzy:SPI_CONN | J1 |
| 1 | C_Small | Capacitors_SMD:C_0603 | C1 |
| 1 | MA700 | Housings_DFN_QFN:QFN-16-1EP_3x3mm_Pitch0.5mm | U1 |
Questions
How big is the Sensor B PCB?
It measures 12 × 27 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Sensor B use?
3 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Sensor B KiCad files?
From the mkramar/dizzyrobot repository on GitHub, at the commit this page was made from: the board is Electronics/Motor/Schematic-Sensor B/sensor B.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Sensor B design in my own project?
Its repository states no licence, so its author keeps all rights: ask mkramar before reusing the design.
More from mkramar/dizzyrobot
11- 4 layers45 × 140 mm
- 2 layers45 × 45 mm
- 2 layers65 × 29.9 mm
- 2 layers45 × 45 mm
- 2 layers45 × 45 mm
- 2 layers36.2 × 24 mm
- 2 layers27.1 × 65.7 mm
- 2 layers26.8 × 39.4 mm
- 2 layers13.2 × 9.1 mm
- 2 layers13.2 × 9.1 mm
Similar boards
- 2 layers40 × 30 mm
- 2 layers51.9 × 16 mm
Passive2-rpi non standard adapter
hzeller/rpi-rgb-led-matrix
Controlling up to three chains of 64x64, 32x32, 16x32 or similar RGB LED displays using Raspberry Pi GPIO
3 parts4.4kGPL-2.0 - 2 layers16.3 × 16.3 mm
- 2 layers
Sub
atopile/atopile
Design circuit boards with code! ✨ Get software-like design reuse 🚀, validation, version control and collaboration in hardware; starting with electronics ⚡️
3 parts4kMIT - 2 layers85 × 30 mm
- 2 layers124.5 × 33.7 mm
- 2 layers10.5 × 83 mm
- 2 layers21.2 × 51.3 mm
Pico reset
hackclub/sprig
🍃 Learn to code by making games in a JavaScript web-based game editor.
3 parts1.1kMIT