2 layers45 × 45 mm
4 layers45 × 140 mm
Dizzyrobot
mkramar/dizzyrobot13- Size
- 45 × 140 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 77
- Nets
- 42
- Pads
- 255
- Tracks, vias
- 465, 149
- Pours
- 26
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 13 Mar 2017
- Updated
- 14 Mar 2020
Overview
Dizzyrobot is an open-source printed circuit board by mkramar, from the mkramar/dizzyrobot repository on GitHub. It is a 4-layer board of 45 × 140 mm with 77 parts on 42 nets, routed with 465 tracks and 149 vias.
It is built around the STM32F031K6U6, LSM6DS33 and ZXTR2012Z-7, with the SQM120P04-04L_GE3 among its other parts. Its parts include 25 connectors, 13 capacitors, 13 resistors, 8 ICs and 7 diodes. It belongs with the STM32 boards of this library.
Main components
4
STM32F031K6U6
UFQFPN-32(5x5)-40℃~+85℃ 12bit 27 2V~3.6V 32 Bit 32KB 48MHz 4KB ARM Cortex-M0 Built-in FLASH UFQFPN-32(5x5) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)
LSM6DS33
LGA-16(3x3)-40℃~+85℃ 1.71V~3.6V 16bit 6uA 8KB IMU (accelerometer + gyroscope) SPI、I2C X,Y,Z X,Y,Z ±16g ±2000dps 运动事件检测、同步与时间戳 LGA-16(3x3) Accelerometers ROHSSTMicroelectronicsAccelerometers
ZXTR2012Z-7
SOT-89-3-40℃~+125℃@(Tj) 1 100V 12V 400uA 45dB@(100Hz) 47mA Fixed Positive SOT-89-3 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSDiodes IncorporatedVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
SQM120P04-04L_GE3
TO-263(D2PAK)-55℃~+175℃ 1 P-Channel 1.614nF 120A 13.98nF 2.02nF 2.5V 330nC@10V 375W 40V 4mΩ@10V P-Channel TO-263(D2PAK) MOSFETs ROHSVishay IntertechnologyMOSFETs
Parts
77| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | CONN_01X01 | Dizzy:0.6x1-conn | J15, J16, J17, J18, J21, J22, J23, J24, J25, J26, J27 |
| 7 | 0.1uF | Capacitors_SMD:C_0603 | 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1 |
| 4 | 100uF | Capacitors_SMD:C_1210 | C12, C13, C28, C29 |
| 4 | 10k | Resistors_SMD:R_0603 | R4, R15, R16, R21 |
| 4 | 20uF | Capacitors_SMD:C_1210 | C2, C3, C9, C10 |
| 4 | 20uF 50V | Capacitors_SMD:C_1210 | C1, C4, C5, C22 |
| 4 | CONN_01X02 | Dizzy:2x1.5-conn | J1, J2, J8, J9 |
| 4 | D_Small | Diodes_SMD:D_SMA | D1, D2, D3, D4 |
| 3 | 390 | Resistors_SMD:R_0603 | R5, R19, R20 |
| 3 | CONN_01X02 | Dizzy:2x2.1-conn | J3, J4, J5 |
| 2 | 47K | Resistors_SMD:R_0603 | R1, R2 |
| 2 | LED_Small | LEDs:LED_0603 | D6, D7 |
| 1 | 0.33uF | Capacitors_SMD:C_0603 | C27 |
| 1 | 15uH | Inductors_SMD:L_10.4x10.4_H4.8 | L1 |
| 1 | 1k 1% | Resistors_SMD:R_0603 | R13 |
| 1 | 30K 1% | Resistors_SMD:R_0603 | R14 |
| 1 | 33uH | Inductors_SMD:L_10.4x10.4_H4.8 | L2 |
| 1 | 4k | Resistors_SMD:R_0603 | R17 |
| 1 | 6k | Resistors_SMD:R_0603 | R18 |
| 1 | ACS781 | Dizzy:ACS781 | U6 |
| 1 | AP1501A-12V | TO_SOT_Packages_SMD:TO-263-5_TabPin3 | U2 |
| 1 | AP1501A-3.3V | TO_SOT_Packages_SMD:TO-263-5_TabPin3 | U1 |
| 1 | CONN_01X04 | Dizzy:4x1.5-conn | J10 |
| 1 | CONN_02X05 | Pin_Headers:Pin_Header_Straight_2x05_Pitch1.27mm_SMD | J6 |
| 1 | CONN_02X10 | Pin_Headers:Pin_Header_Straight_2x10_Pitch2.54mm_SMD | J7 |
| 1 | D_Small | Diodes_SMD:D_SMC | D5 |
| 1 | LSM6DS33 | Dizzy:LGA16R50P3X5_300X300X100 | U7 |
| 1 | LTC2876 | Dizzy:LTC2876 | U9 |
| 1 | LTC2954-2 | Dizzy:8-DFN-DDB | U10 |
| 1 | M1 | Dizzy:Hole-m3 | J11 |
| 1 | M2 | Dizzy:Hole-m3 | J12 |
| 1 | M3 | Dizzy:Hole-m3 | J13 |
| 1 | M4 | Dizzy:Hole-m3 | J14 |
| 1 | Resonator_Small | Dizzy:Oscillator | Y1 |
| 1 | SQM120P04-04L | TO_SOT_Packages_SMD:TO-263-2 | Q1 |
| 1 | STM32F031K6U6 | Dizzy:UFQFPN32-small-pad | U8 |
| 1 | ZXTR2012Z | TO_SOT_Packages_SMD:SOT-89-3 | U3 |
Questions
How big is the Dizzyrobot PCB?
It measures 45 × 140 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Dizzyrobot use?
77 parts, built around the STM32F031K6U6, LSM6DS33, ZXTR2012Z-7 and SQM120P04-04L_GE3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Dizzyrobot KiCad files?
From the mkramar/dizzyrobot repository on GitHub, at the commit this page was made from: the board is Electronics/Mainboard/Schematic/Mainboard.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Dizzyrobot design in my own project?
Its repository states no licence, so its author keeps all rights: ask mkramar before reusing the design.
More from mkramar/dizzyrobot
11- 2 layers45 × 45 mm
- 2 layers65 × 29.9 mm
- 2 layers45 × 45 mm
- 2 layers45 × 45 mm
- 2 layers36.2 × 24 mm
- 2 layers27.1 × 65.7 mm
- 2 layers26.8 × 39.4 mm
- 2 layers12 × 27 mm
- 2 layers13.2 × 9.1 mm
- 2 layers13.2 × 9.1 mm
Similar boards
- 2 layers34.5 × 35.8 mm
LED Dimmer
RossPorter506/LED_Dimmer
Schematic and PCB layout for a dumb 5-12V LED dimming circuit, capable of 2- 99% PWM-based dimming.
27 parts - 2 layers
- 2 layers17.8 × 33 mm
- 2 layers31.8 × 20.3 mm
- 2 layers18 × 22.6 mm
LSM6DS33
vul-os/sirboard
Open hardware: 107 KiCad PCB designs — SMD-to-THT breakout adapters, ATTiny/ATMega/ESP development boards, and a 39-part sensor line on a common JST-SH connector.
29 parts56Apache-2.0 - 2 layers51.4 × 42 mm
Adafruit adafruit clue pcb adafruit clue nrf52840 express
oomlout/oomlout_oomp_project_bot_v_2
62 parts - 4 layers61.8 × 73.2 mm
- 4 layers52.5 × 46.5 mm
