

Headlamp pcb
PCB Designs
- Size
- 35.1 × 13.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 8
- Nets
- 12
- Pads
- 30
- Tracks, vias
- 47, 0
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 14 Oct 2023
- Updated
- 4 Nov 2023
Overview
Headlamp pcb is an open-source printed circuit board by mkhuthir, from the mkhuthir/pcb repository on GitHub, published under the BSD-2-Clause licence. It is a 2-layer board of 35.1 × 13.1 mm with 8 parts on 12 nets, routed with 47 tracks and 0 vias.
It is built around the ATTINY85-20PU and 2N2222A. Its parts include 3 resistors, 2 connectors, 1 capacitor, 1 IC and 1 transistor. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
2ATTINY85-20PU
PDIP-8-40℃~+85℃ 10bit 2.7V~5.5V 20MHz 512Byte 512Byte 6 8 Bit 8KB AVR Built-in FLASH PDIP-8 Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)2N2222A
TO-92-55℃~+150℃ 1 NPN 100MHz 100nA 400 40V 5V 600mA 600mV 625mW NPN TO-92 Bipolar (BJT) ROHSSlkorBipolar (BJT)
README
README.mdpcb
PCB Designs
Parts
8| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 1K | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical | R1, R2 |
| 1 | 10 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical | R3 |
| 1 | 100nF | Capacitor_THT:C_Disc_D3.4mm_W2.1mm_P2.50mm | C1 |
| 1 | 2N2222A | Package_TO_SOT_THT:TO-92_Inline_Wide | Q1 |
| 1 | ATtiny85-20PU | Package_DIP:DIP-8_W7.62mm | U1 |
| 1 | AVR-ISP-6 | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J2 |
| 1 | Conn_01x05_Male | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J1 |
More from mkhuthir/pcb
2- 2 layers110 × 95 mm

- 2 layers20.3 × 38.1 mm

Similar boards
- 2 layers101.5 × 83 mm

- 2 layers279.4 × 203.2 mm

Z180GDC
lynchaj/rhyophyre
Single Board Computer featuring Zilog Z180 processor and NEC µPD7220 Graphics Display Controller
249 parts12 - 2 layers99.1 × 99.1 mm

QL Qsound10x10
alvaroalea/QL_QsoundQprint_clone
A clone board of the Sound card for the Sinclair QL Computer.
23 parts11 - 2 layers156.5 × 67.5 mm

NixieScanDisplay
profdc9/NixieClock
A Nixie clock that uses IN-14 tubes and very generic components that can be easily sourced.
106 parts10 - 2 layers89.3 × 50 mm

MM58167-ISA RTC
jensma-de/MM58167-ISA-RTC
RTC module for the ISA slot. With schematics, project files in kicad and open source software to drive the clock.
29 parts9 - 2 layers97.6 × 76.8 mm

- 2 layers14.6 × 13.6 mm

Chip and transistor
gidim/e61-gauge
An analog temperature gauge for E61 espresso machines. A custom PCB drives a VID6606 stepper motor gauge needle, reading temperature from an NTC thermistor.
15 parts8 - 2 layers147.2 × 58.3 mm

Li IonBatteryProtection
cnobile2012/Li-IonBatteryProtection
Circuit to protect Li-Ion and Li-Po batteries at the cell level.
81 parts6MIT
Questions
How big is the Headlamp pcb PCB?
It measures 35.1 × 13.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Headlamp pcb use?
8 parts, built around the ATTINY85-20PU and 2N2222A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Headlamp pcb KiCad files?
From the mkhuthir/pcb repository on GitHub, at the commit this page was made from: the board is attiny85-headlamp/headlamp-pcb.kicad_pcb and its schematic ATtiny104XNANOaddon/ATtiny104XNANOaddon.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Headlamp pcb design in my own project?
Its repository publishes it under the BSD-2-Clause licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).