2 layers103.8 × 50 mm
Galagino pcb set
harbaum/galagino
A Galaga, Pac-Man and Donkey Kong arcade emulator for the ESP32
26 parts558
2 layers90 × 55.5 mm
RFID Connector
MJPees/RaceCollection5RFID lap counter for SmartRace and CH-Racing-Club
- Size
- 90 × 55.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 11
- Nets
- 47
- Pads
- 66
- Tracks, vias
- 59, 0
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 19 Apr 2025
- Updated
- 4 Aug 2026
Overview
RFID Connector is an open-source printed circuit board by MJPees, from the MJPees/RaceCollection repository on GitHub, published under the MIT licence. It is a 2-layer board of 90 × 55.5 mm with 11 parts on 47 nets, routed with 59 tracks and 0 vias.
It is built around the ESP32-DEVKITC-VE. Its parts include 3 resistors, 3 diodes, 3 connectors, 1 IC and 1 switch. It belongs with the radio and wireless boards and the ESP32 boards of this library.
Main components
1README
README.mdRaceCollection Überblick
Die RaceCollection ist ein System für den Miniatur-Automobilsport, das verschiedene Komponenten zur präzisen Zeiterfassung und Rennsteuerung bietet.
RFID-Connector
Der RFID-Connector fungiert als RFID-Empfänger. Er erfasst Fahrzeuge präzise und übermittelt die Zieldurchfahrten an Rennmanagement-Software wie SmartRace oder CH-Racing-Club.
Zum RFID-Connector
GhostCar / Startampel-LED mit GhostCar
Diese Komponente bietet eine GhostCar-Funktion, bei der Sie gegen einen Carrera Hybrid Racer antreten können. Sie beinhaltet auch eine Startampel-LED. Ein zugehöriges Video zeigt das "GhostCar-StartingLights"-System in Aktion mit der "SmartRace"-Software. Es demonstriert den Countdown der Startampel, das "Go"-Signal mit grünen Lichtern, die GhostCar-Funktionalität, die Rundenzeiterfassung und die Rennsteuerung.
Zum GhostCar
Startampel Display
Das Startampel Display ist eine separate Anzeigeeinheit für die Startampel.
Zur Startampel
Parts
11| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | R120 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1, R2, R3 |
| 1 | +5V power supply | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J1 |
| 1 | 3V3 RX TX GND | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | Conn_01x02 | Connector_Phoenix_MC:PhoenixContact_MC_1,5_2-G-3.81_1x02_P3.81mm_Horizontal | J3 |
| 1 | ESP32-DEVKITC | ESP32-DEVKITC:MODULE_ESP32-DEVKITC | U1 |
| 1 | LED RFID | LED_THT:LED_D3.0mm | D1 |
| 1 | LED WEBSOCKET | LED_THT:LED_D3.0mm | D2 |
| 1 | LED WIFI | LED_THT:LED_D3.0mm | D3 |
| 1 | SW_RESET_TAG_IDs | Button_Switch_THT:SW_PUSH_6mm | SW1 |
Questions
How big is the RFID Connector PCB?
It measures 90 × 55.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the RFID Connector use?
11 parts, built around the ESP32-DEVKITC-VE. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the RFID Connector KiCad files?
From the MJPees/RaceCollection repository on GitHub, at the commit this page was made from: the board is KiCad/RFID-Connector/RFID-Connector.kicad_pcb and its schematic KiCad/RFID-Connector/RFID-Connector.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the RFID Connector design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers115 × 75 mm
SpinCoater
RParkerE/OpenSilicon
OpenSilicon enables DIY semiconductor fabrication with open-source guides for building IC equipment at home. The project includes BOMs, 3D files, firmware, and PDKs, supporting makers and researchers in chip fabrication.
11 parts55GPL-3.0 - 2 layers127.3 × 54.1 mm
ESP32 SolarBox
cole8888/SRNE-Solar-Charge-Controller-Monitor
Read data from SRNE solar charge controllers.
34 parts42 - 2 layers62.2 × 57.1 mm
- 2 layers99.9 × 99.9 mm
- 2 layers
- 2 layers72.5 × 84.8 mm
Devboard
ste2425/PSP-Bluetooth-AVConnector
An AV-Out Breakout library for the PSP. Providing Kicad symbols and footprints to interface with the PSP 2/3K AVOut socket (also known as the TVOut socket)
13 parts12 - 2 layers100 × 88.9 mm
