
XIAO ESP32 C6
MitkoDyakov/Calipatron
I design my own digital caliper based on STM32F103C8T6 blue pill.

I design my own digital caliper based on STM32F103C8T6 blue pill.
Hardware V2 is an open-source printed circuit board by MitkoDyakov, from the MitkoDyakov/Calipatron repository on GitHub, published under the MIT licence. It is a 4-layer board of 148.3 × 62.6 mm with 27 parts on 31 nets, routed with 148 tracks and 34 vias.
It is built around the AD8603AUJ, 74HC595 and ADR510ARTZ-REEL7. Its parts include 8 capacitors, 8 resistors, 6 ICs and 2 connectors.
I design my own digital caliper based on STM32F103C8T6 blue pill.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 100K | Resistor_SMD:R_0805_2012Metric | R1, R3, R7, R8 |
| 4 | 100nF | Capacitor_SMD:C_0805_2012Metric | C1, C2, C11, C12 |
| 2 | 33nF | Capacitor_SMD:C_0805_2012Metric | C5, C7 |
| 2 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1, J2 |
| 1 | 10K | Resistor_SMD:R_0805_2012Metric | R5 |
| 1 | 160R | Resistor_SMD:R_0805_2012Metric | R4 |
| 1 | 33K | Resistor_SMD:R_0805_2012Metric | R2 |
| 1 | 47nF | Capacitor_SMD:C_0805_2012Metric | C6 |
| 1 | 5K | Resistor_SMD:R_0805_2012Metric | R6 |
| 1 | 74HC595 | Package_SO:TSSOP-16_4.4x5mm_P0.65mm | U4 |
| 1 | AD8603 | Package_TO_SOT_SMD:TSOT-23-5 | U6 |
| 1 | ADR510ARTZ-REEL7 | 00_CAL:SOT95P237X112-3N | U5 |
| 1 | MCP6S21-I_SN | 00_CAL:SOIC127P600X175-8N | U3 |
| 1 | NP | Capacitor_SMD:C_0805_2012Metric | C13 |
| 1 | XIAO | 00_CAL:Mod | U1 |
| 1 | signal_generator | 00_CAL:excitation_electrodes | U2 |
The 24 most common of 27 parts.

MitkoDyakov/Calipatron
I design my own digital caliper based on STM32F103C8T6 blue pill.

Maritime-Hacking-Village/Badge-2025
Public repository for the official MHV 2025 badge.



niki100jad/POQUITO_ADCS
ADCS for a PocketQube mission (Warning: Still untested!)

scalinq-lab/cryomagsens
The sensor unit was designed in KiCad 10 and manufactured by JLCPCB. It is built in a flex PCB material to achieve a very small build height, in order to come very close to the device under test.


ZeshuLiu/SX-70-Mk2
把板子上的U+ U- GND VCC焊到usb线上,连接电脑后可以当作树莓派Pico开发板进行操作,上传代码的参见这里(树莓派官网)。 \ 在将机身主控安装至机器内部之前需要将micropython固件及代码烧录至控制器中。后续可以通过机身控制器上的USB接口连接开发板并更新python代码。 将code根目录中的所有python文件上传至控制器(文件夹不需要),并且将gmain.py命名为…

It measures 148.3 × 62.6 mm and has 4 copper layers, 1.6 mm thick.
27 parts, built around the AD8603AUJ, 74HC595 and ADR510ARTZ-REEL7. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the MitkoDyakov/Calipatron repository on GitHub, at the commit this page was made from: the board is Hardware/V2/Hardware V2.kicad_pcb and its schematic Hardware/V2/Hardware V2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).