Skip to the content
2 layers36.7 × 16.3 mmM0s pmod, the printed circuit board in 3D

Custom board designs for MiSTle projects

Size
36.7 × 16.3 mm
Copper layers
2
Thickness
1.6 mm
Parts
11
Nets
16
Pads
46
Tracks, vias
86, 0
Pours
1
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
11 Aug 2025
Updated
21 Oct 2026

Overview

M0s pmod is an open-source printed circuit board by MiSTle-Dev, from the MiSTle-Dev/Boards repository on GitHub. It is a 2-layer board of 36.7 × 16.3 mm with 11 parts on 16 nets, routed with 86 tracks and 0 vias.

It is built around the EA2208T6R and MBRA340. Its parts include 3 resistors, 2 capacitors, 2 diodes, 2 connectors and 1 IC.

Main components

2

README

misteryshield20k/README.md

MiSTeryNano MIDI shield for Tang Nano 20k

Device

This is a base board for the Tang Nano 20K and optionally the M0S Dock. It features:

  • Headers to plug the Tang Nano 20K
  • A seperate USB power supply (old variant only)
    • Used if the Tang Nano 20K is being used as a USB host itself
    • Can be broken off to make room for a M0S Dock
  • M0S Dock connector
  • Atari style joystick
    • Supports two buttons
    • Including 5V supply and 5V level shifters
    • Works with DB9 joystcks and mice
  • MIDI
    • MIDI OUT with driver chip to protect Tang Nano 20K
    • MIDI IN with optocoupler to protect Tang Nano 20K

PCBA production files for JLCPCB are availble here.

Variants

There are now two variants of the board:

  • The original variant including a small PCB breakout with a USB-C connector. This variant could theoretically be used without M0S Dock. But in fact the M0S Dock is currently needed by many cores and the USB-C part needs to be cut off to make space for the M0S Dock. However, it turned out that some people damage the PCB in the process of cutting this part off. That's why the second M0S variant now exists.

  • The M0S variant does not include the USB-C part and can only be used in conjunction with a M0S Dock. This is the preferred version as nothing has to be cut to use it. However, this variant has not been tested, yet. No problems are expected, but please report back if you successfully order and use one of these.

The PCB The M0S PCB

The part carrying the USB connector can be cut away making room for a M0S Dock which will then also be used to provide power to the Tang Nano 20K.

Rendering

Schematic PDF

Parts

11
QtyValueFootprintReferences
222uFCapacitor_SMD:C_1206_3216MetricC1, C2
122kResistor_SMD:R_0805_2012MetricR1
13kResistor_SMD:R_0805_2012MetricR2
14.7uHInductor_SMD:L_6.3x6.3_H3L1
1560Resistor_SMD:R_0805_2012MetricR3
1EA2208Package_TO_SOT_SMD:SOT-23-6U1
1M0SConnector_PinSocket_2.54mm:PinSocket_2x06_P2.54mm_HorizontalJ2
1MBRA340Diode_SMD:D_SMAD1
1PMODConnector_PinHeader_2.54mm:PinHeader_2x06_P2.54mm_HorizontalJ1
1greenLED_SMD:LED_0805_2012MetricD2

More from MiSTle-Dev/Boards

12
  • 2 layers90 × 67 mmMisterydev20k, the printed circuit board in 3D

    Misterydev20k

    MiSTle-Dev/Boards

    Custom board designs for MiSTle projects

    183 parts23
  • 2 layers110 × 67 mmMistle gw3a 20, the printed circuit board in 3D

    Mistle gw3a 20

    MiSTle-Dev/Boards

    Custom board designs for MiSTle projects

    175 parts23
  • 2 layers222.3 × 63 mmKeyboard, the printed circuit board in 3D

    Keyboard

    MiSTle-Dev/Boards

    Custom board designs for MiSTle projects

    153 parts23
  • 2 layers42.8 × 81.8 mmIcepi carrier, the printed circuit board in 3D

    Icepi carrier

    MiSTle-Dev/Boards

    Custom board designs for MiSTle projects

    83 parts23
  • 2 layers22.6 × 54 mmMisteryshield20k lite, the printed circuit board in 3D

    Misteryshield20k lite

    MiSTle-Dev/Boards

    Custom board designs for MiSTle projects

    44 parts23
  • 2 layers57 × 57 mmMisteryshield20k, the printed circuit board in 3D

    Misteryshield20k

    MiSTle-Dev/Boards

    Custom board designs for MiSTle projects

    40 parts23
  • 2 layers57 × 57 mmMisteryshield20k m0s, the printed circuit board in 3D

    Misteryshield20k m0s

    MiSTle-Dev/Boards

    Custom board designs for MiSTle projects

    37 parts23
  • 2 layers37.9 × 35.2 mmLvds2tmds, the printed circuit board in 3D

    Lvds2tmds

    MiSTle-Dev/Boards

    Custom board designs for MiSTle projects

    25 parts23
  • 2 layers61.4 × 23 mmPico pmod, the printed circuit board in 3D

    Pico pmod

    MiSTle-Dev/Boards

    Custom board designs for MiSTle projects

    25 parts23
  • 2 layers53.6 × 71.4 mmT20 pmod, the printed circuit board in 3D

    T20 pmod

    MiSTle-Dev/Boards

    Custom board designs for MiSTle projects

    16 parts23

Similar boards

  • 4 layers70 × 72 mmSPINC AA Charger, the printed circuit board in 3D

    SPINC AA Charger

    CoretechR/SPINC

    DIY Automatic Battery Charger Using RP2040

    101 parts467GPL-3.0
  • 4 layers90 × 40 mmUsb3-ngff carrier, the printed circuit board in 3D

    Usb3-ngff carrier

    themainframe/5g-m2-usb3-interface-pcb

    KiCad EDA Project for my 5G M.2 (NGFF) USB3 Interface board

    62 parts80MIT
  • 2 layers58 × 45 mmVfd ps, the printed circuit board in 3D

    Vfd ps

    esynr3z/vfd-ps

    Power supply and filament driver for vacuum fluorescent display (VFD)

    51 parts15
  • 2 layers145 × 27 mmLed array driver, the printed circuit board in 3D

    Led array driver

    themainframe/led-matrix-driver-pcb

    PCB CAM files for my LED Matrix Driver Project based on ESP32

    93 parts2
  • 2 layers68 × 55 mmAurdino oled. sd card, the printed circuit board in 3D

    Aurdino oled. sd card

    ayodhyaphanidurgaprasad-source/PCB-Projects

    Designed a 2-layer PCB that converts USB to EtherCAT for industrial network communication. Worked on the complete design flow — schematic design, component selection, PCB layout, and routing in KiCad.

    66 parts
  • 2 layers57.4 × 55.1 mmDriverboard, the printed circuit board in 3D

    Driverboard

    cocktailmixer/electronics

    Custom electronics for the cocktailmixer bot

    31 partsCC-BY-SA-4.0
  • 4 layers160 × 160 mmDAQCard2015, the printed circuit board in 3D

    DAQCard2015

    frmeier/VFPIX-telescope-PCB

    Repository for DTB used in the PSI pixel telescope and VFPIX project

    232 parts

Questions

How big is the M0s pmod PCB?

It measures 36.7 × 16.3 mm and has 2 copper layers, 1.6 mm thick.

What parts does the M0s pmod use?

11 parts, built around the EA2208T6R and MBRA340. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the M0s pmod KiCad files?

From the MiSTle-Dev/Boards repository on GitHub, at the commit this page was made from: the board is m0s_pmod/m0s_pmod.kicad_pcb and its schematic atarist_keyboard/pcb/keyboard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the M0s pmod design in my own project?

Its repository states no licence, so its author keeps all rights: ask MiSTle-Dev before reusing the design.