2 layers33.5 × 46 mm
2 layers58.2 × 20.1 mm
Nes controller v2
minor-industries/hardwareMinor Industries' PCBs
- Size
- 58.2 × 20.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 16
- Nets
- 35
- Pads
- 89
- Tracks, vias
- 174, 24
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 15 Apr 2024
- Updated
- 6 Mar 2026
Overview
Nes controller v2 is an open-source printed circuit board by minor-industries, from the minor-industries/hardware repository on GitHub. It is a 2-layer board of 58.2 × 20.1 mm with 16 parts on 35 nets, routed with 174 tracks and 24 vias.
It is built around the ATSAMD21E18A-AF and AP2112K-3.3. Its parts include 5 capacitors, 4 ICs, 2 resistors and 2 connectors. It belongs with the retro computing and games boards and the SAM D and SAM boards of this library.
Main components
2
ATSAMD21E18A-AF
TQFP-32(7x7)-40℃~+125℃ 1.62V~3.6V 10bit 12bit 256KB 26 32 Bit 32KB 48MHz ARM Cortex-M0+ Built-in FLASH TQFP-32(7x7) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
AP2112K-3.3
SOT253.3V 600mA CMOS Low Dropout Linear Regulator with EnableDiodes IncorporatedUncategorised
Parts
16| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 1uF | Capacitor_SMD:C_0805_2012Metric | C4, C7, C8 |
| 3 | MountingHole | MountingHole:MountingHole_2.2mm_M2 | H1, H2, H3 |
| 2 | 10k | Resistor_SMD:R_0805_2012Metric | R1, R2 |
| 2 | 10uF | Capacitor_SMD:C_1206_3216Metric | C1, C2 |
| 2 | ~ | Minor_Industries:NES controller port | U3, U4 |
| 1 | AP2112K-3.3 | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | ATSAMD21E18A-A | Package_QFP:TQFP-32_7x7mm_P0.8mm | U7 |
| 1 | Conn_01x06 | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J3 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Amphenol_10118193-0001LF_Horizontal | J1 |
More from minor-industries/hardware
11- 2 layers22.3 × 56 mm
- 2 layers22 × 39.3 mm
- 2 layers71.8 × 34.2 mm
- 2 layers23 × 26.9 mm
- 2 layers66.1 × 20.1 mm
- 2 layers51 × 20.1 mm
- 2 layers19.5 × 26.8 mm
- 2 layers23 × 17.5 mm
- 2 layers19.3 × 14.5 mm
- 2 layers11.5 × 15 mm
Similar boards
- 4 layers44.5 × 34.9 mm
Eclair
upbeatcarri/eclair
Pocket device for taking quick notes, acting as a USB keyboard for PC sync etc., with custom apps samd21, tinygo
56 parts25 - 2 layers36.6 × 36.4 mm
- 2 layers54.6 × 68 mm
Rng pcb
mitsake/rng-pcb
A hardware random number generator that uses avalanche noise. Based on the Trinket M0.
46 parts5CC-BY-SA-4.0 - 2 layers12 × 30 mm
Electric greetings
electricui/electricui-helloboard
Cute arduino compatible development board for introducing people to Electric UI
19 parts1 - 2 layers107.9 × 111.3 mm
SAMD21E18 LilyPad Sticker: Corgi
Hugoyhu/corgikeychain
Corgi "keychain" LilyPad with ATSAMD21E18
30 parts1 - 2 layers73.2 × 38.8 mm
SAMD21E18 LilyPad Sticker: Enjoy Hack Club
Hugoyhu/Hack-Club-Sticker-Development-Boards
"Sticker" dev boards.
29 parts1MIT - 4 layers37.6 × 30.6 mm
Bias generator LT8362
OpenSiPM/sipm-bias-control
Single channel silicon photomultipliers for high-speed fluorescence imaging
61 parts44 - 4 layers100 × 100 mm
Pi TX 35W PA V2
M0LTE/pi-transceiver
An attempt to build a complete ham radio transceiver around a Raspberry Pi
185 parts15
Questions
How big is the Nes controller v2 PCB?
It measures 58.2 × 20.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Nes controller v2 use?
16 parts, built around the ATSAMD21E18A-AF and AP2112K-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Nes controller v2 KiCad files?
From the minor-industries/hardware repository on GitHub, at the commit this page was made from: the board is nes-controller-v2/nes-controller-v2.kicad_pcb and its schematic archive/led-driver-breakout/led-driver-breakout.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Nes controller v2 design in my own project?
Its repository states no licence, so its author keeps all rights: ask minor-industries before reusing the design.