2 layers73.2 × 38.8 mm
SAMD21E18 LilyPad Sticker: Enjoy Hack Club
Hugoyhu/Hack-Club-Sticker-Development-Boards
"Sticker" dev boards.
29 parts1MIT
2 layers107.9 × 111.3 mm
SAMD21E18 LilyPad Sticker: Corgi
Hugoyhu/corgikeychain1Corgi "keychain" LilyPad with ATSAMD21E18
- Size
- 107.9 × 111.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 30
- Nets
- 38
- Pads
- 100
- Tracks, vias
- 183, 30
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 7 Mar 2021
- Updated
- 7 Mar 2021
Overview
SAMD21E18 LilyPad Sticker: Corgi is an open-source printed circuit board by Hugoyhu, from the Hugoyhu/corgikeychain repository on GitHub. It is a 2-layer board of 107.9 × 111.3 mm with 30 parts on 38 nets, routed with 183 tracks and 30 vias.
It is built around the ATSAMD21E18A-AF, AP2112K-3.3 and NSR0320MW2, with the WS2812B among its other parts. Its parts include 17 connectors, 4 capacitors, 2 resistors, 2 ICs and 2 diodes. It belongs with the SAM D and SAM boards of this library.
Main components
4
ATSAMD21E18A-AF
TQFP-32(7x7)-40℃~+125℃ 1.62V~3.6V 10bit 12bit 256KB 26 32 Bit 32KB 48MHz ARM Cortex-M0+ Built-in FLASH TQFP-32(7x7) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
AP2112K-3.3
SOT253.3V 600mA CMOS Low Dropout Linear Regulator with EnableDiodes IncorporatedUncategorised
NSR0320MW2
SOD-323-55℃~+125℃ 1 Independent 1A 20V 500mV@900mA 50uA@15V 5A SOD-323 Schottky Diodes ROHSonsemiSchottky Diodes
WS2812B
5mm X 5mm Surface Mount RGB LED with Intelligent ControlWorldsemiUncategorised
Parts
30| Qty | Value | Footprint | References |
|---|---|---|---|
| 15 | Conn_01x01_Female | SparkFun_LilyPad_Main_Board_v21:PETAL-LONG-1-2SIDE | J1, J2, J3, J4, J5, J6, J7, J8, J9, J10, J11, J12, J13, J14, J17 |
| 2 | 10uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C3 |
| 2 | 1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C4 |
| 2 | 5.1K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2 |
| 2 | TestPoint | TestPoint:TestPoint_Pad_2.0x2.0mm | TP1, TP2 |
| 1 | AP2112K-3.3 | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | ATSAMD21E18A-A | Package_QFP:TQFP-32_7x7mm_P0.8mm | U1 |
| 1 | Conn_01x04_Female | Connector_JST:JST_SH_BM04B-SRSS-TB_1x04-1MP_P1.00mm_Vertical | J16 |
| 1 | NSR0320 | Diode_SMD:D_SOD-323_HandSoldering | D1 |
| 1 | SW_Push | Button_Switch_SMD:SW_SPST_B3U-3000P | SW1 |
| 1 | USB_C_Receptacle_USB2.0 | USB-THT-IO:GCT_USB4085-GF-A_REVA | J15 |
| 1 | WS2812B | LED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D2 |
Similar boards
- 2 layers52 × 25 mm
Logicool K275
h7ga40/RP2040_Logicool_K275_PCB
Replace PCB of Logitech K275 keyboard with RP2040
36 partsCC0-1.0 - 4 layers44.5 × 34.9 mm
Eclair
upbeatcarri/eclair
Pocket device for taking quick notes, acting as a USB keyboard for PC sync etc., with custom apps samd21, tinygo
56 parts25 - 2 layers36.6 × 36.4 mm
- 2 layers54.6 × 68 mm
Rng pcb
mitsake/rng-pcb
A hardware random number generator that uses avalanche noise. Based on the Trinket M0.
46 parts5CC-BY-SA-4.0 - 2 layers12 × 30 mm
Electric greetings
electricui/electricui-helloboard
Cute arduino compatible development board for introducing people to Electric UI
19 parts1 - 2 layers33.5 × 46 mm
- 4 layers90.2 × 95.9 mm
Questions
How big is the SAMD21E18 LilyPad Sticker: Corgi PCB?
It measures 107.9 × 111.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the SAMD21E18 LilyPad Sticker: Corgi use?
30 parts, built around the ATSAMD21E18A-AF, AP2112K-3.3, NSR0320MW2 and WS2812B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the SAMD21E18 LilyPad Sticker: Corgi KiCad files?
From the Hugoyhu/corgikeychain repository on GitHub, at the commit this page was made from: the board is SAMD21E18 LilyPad Sticker: Corgi.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the SAMD21E18 LilyPad Sticker: Corgi design in my own project?
Its repository states no licence, so its author keeps all rights: ask Hugoyhu before reusing the design.