2 layers142 × 78 mm
2 layers110 × 45 mm
Kill control
minamonra/MKiCadProMKiCadPro
- Size
- 110 × 45 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 74
- Nets
- 61
- Pads
- 208
- Tracks, vias
- 423, 38
- Pours
- 10
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 16 Jan 2024
- Updated
- 11 Apr 2026
Overview
Kill control is an open-source printed circuit board by minamonra, from the minamonra/MKiCadPro repository on GitHub. It is a 2-layer board of 110 × 45 mm with 74 parts on 61 nets, routed with 423 tracks and 38 vias.
It is built around the TPS5430DDA and AMS1117-3.3. Its parts include 28 resistors, 26 capacitors, 4 connectors, 2 ICs and 2 inductors. It belongs with the STM32 boards of this library.
Main components
2
TPS5430DDA
ESOP-8-40℃~+125℃@(TJ) 1 1.221V~32.04V 3A 4.4mA 5.5V~36V 500kHz Adjustable Buck Buck Built-in No ESOP-8 DC-DC Converters ROHSTexas InstrumentsDC-DC Converters
AMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
README
Power/feron_lb019/readme.mdБлок питания 24 вольт, 150 Ватт, обратноход на ШИМ OB2269, частота при R18=27кОм - 65кГц.
Возможные варианты ШИМки CR6841/2, SG6841/2, SG5841/2, L2268/9, LD7551 (без Rt).
Размер корпуса 200x55.
Parts
74| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 0,1 | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C16, C17, C18, C19, C24, C26, C28, C29, C30 |
| 7 | 22 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R7, R9, R10, R11, R14, R15, R16 |
| 4 | 150 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R21, R22, R25, R26 |
| 4 | 1k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R2, R4, R5, R12 |
| 3 | 0,01 | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1, C3, C22 |
| 3 | 100 | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C11, C14, C15 |
| 3 | 10k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R6, R27, R29 |
| 3 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3 |
| 3 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_DIN965_Pad | H4, H5, H6 |
| 2 | 10 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R17, R31 |
| 2 | 100* | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C9, C10 |
| 2 | 15 | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C12, C13 |
| 2 | 15k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R3, R13 |
| 2 | 22,0 | Capacitor_SMD:C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C20, C23 |
| 2 | 2k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R19, R20 |
| 2 | 4,7 | Capacitor_SMD:C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C6, C8 |
| 2 | ~ | LED_SMD:LED_1210_3225Metric_Pad1.42x2.65mm_HandSolder | VD1, VD2 |
| 1 | * | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R8 |
| 1 | 0,01 | Capacitor_SMD:C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C2 |
| 1 | 100мкГн | Inductor_SMD:L_1210_3225Metric_Pad1.42x2.65mm_HandSolder | L1 |
| 1 | 12MHz* | Crystal:Crystal_SMD_5032-2Pin_5.0x3.2mm | Y1 |
| 1 | 220,0 | Capacitor_Tantalum_SMD:CP_EIA-7132-20_AVX-U | C25 |
| 1 | 22мкГн | Inductor_SMD:L_Abracon_ASPI-0630LR | L2 |
| 1 | 2k7 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1 |
| 1 | 3,24k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R30 |
| 1 | 3k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R23 |
| 1 | 47,0 | Capacitor_SMD:C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C27 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | Boot | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP1 |
| 1 | Debug | 2020_zmod:PinHeader_1x06_P2.54mm_Vertical_zm | J1 |
| 1 | STM32F030K6Tx | Package_QFP:LQFP-32_7x7mm_P0.8mm | MCU1 |
| 1 | TPS5430DDA | 0smps_footprints:TI_SO-PowerPAD-8_ThermalViasV1 | U3 |
| 1 | t | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | ~ | Connector_PinHeader_2.54mm:PinHeader_1x15_P2.54mm_Vertical | J3 |
| 1 | ~ | 0smps_footprints:IDC-Header_2x05_P2.54_V01 | J2 |
| 1 | ~ | Diode_SMD:D_2010_5025Metric_Pad1.52x2.65mm_HandSolder | VD3 |
Questions
How big is the Kill control PCB?
It measures 110 × 45 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Kill control use?
74 parts, built around the TPS5430DDA and AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Kill control KiCad files?
From the minamonra/MKiCadPro repository on GitHub, at the commit this page was made from: the board is Power/kill_control/kill_control.kicad_pcb and its schematic 2025/opamp-opto-test/otopto01/otopto01.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Kill control design in my own project?
Its repository states no licence, so its author keeps all rights: ask minamonra before reusing the design.
More from minamonra/MKiCadPro
9- 2 layers149.9 × 60 mm
- 2 layers198 × 53 mm
- 2 layers126 × 78 mm
- 2 layers67 × 34 mm
- 2 layers5 × 8.2 mm
- 2 layers30 × 35 mm
- 2 layers27 × 16 mm
- 2 layers38 × 16 mm
Similar boards
- 2 layers105.2 × 71.1 mm
Onyx PCB
CuriousMotor/Onyx-Stepper-Motherboard
The successor of the iconic Arduino-CNC-shield
96 parts56MIT - 2 layers96 × 74.4 mm
Monolith
luftaquila/monolith
DIY wireless real-time datalogging platform for Student Formula and Baja.
138 parts45 - 4 layers288.5 × 95 mm
OTTO Beta Main
bitfieldaudio/otto-hardware
OTTO hardware files for upcoming beta. WORK IN PROGRESS
331 parts37 - 2 layers54 × 68 mm
OpenSTM32F4 LQFP64
phonght32/openSTM32F4_LQFP64
openSTM32 board using STM32F4 LQFP64 package. This board designed to perform base control for SLAM and Navigation.There are also many availabe connectors that meet many other application requirements.
77 parts7MIT - 2 layers217 × 116 mm
Board nhiet
NguyenThanhHuy-debug/PCB-Liquid-Dispensing-Cabinet
PCB-Liquid-Dispensing-Cabinet — a software project built with modern tooling.
191 parts4 - 4 layers64.6 × 57.3 mm
- 2 layers68 × 54 mm
Controller
byrantech/stepcraft-3-d600-controller
Open-source FluidNC Controller for the Stepcraft-3/D.600 system.
97 parts2MIT - 2 layers100 × 100 mm
CARTPOLE MOSFET
conmeokhoi/Controller-for-Cart-Pole-System
Designed PCB board with 24V/150W DC Motor Controller for Cart-Pole systems using IRF3205S MOSFETs and IR2104 drivers.
129 parts1