Skip to the content
2 layers27 × 16 mmLn2220, the printed circuit board in 3D

MKiCadPro

Size
27 × 16 mm
Copper layers
2
Thickness
1.6 mm
Parts
21
Nets
9
Pads
41
Tracks, vias
77, 9
Pours
1
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
16 Jan 2024
Updated
11 Apr 2026

Overview

Ln2220 is an open-source printed circuit board by minamonra, from the minamonra/MKiCadPro repository on GitHub. It is a 2-layer board of 27 × 16 mm with 21 parts on 9 nets, routed with 77 tracks and 9 vias.

It is built around the LN2220PAR. Its parts include 5 capacitors, 5 resistors, 5 connectors, 4 diodes and 1 inductor.

Main components

1

README

Power/feron_lb019/readme.md

Блок питания 24 вольт, 150 Ватт, обратноход на ШИМ OB2269, частота при R18=27кОм - 65кГц.

Возможные варианты ШИМки CR6841/2, SG6841/2, SG5841/2, L2268/9, LD7551 (без Rt).

Размер корпуса 200x55.

Обсудить можно тут.

Parts

21
QtyValueFootprintReferences
5CONN01PINConnector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_VerticalJ1, J2, J3, J4, J5
4~Capacitor_SMD:C_0805_2012MetricC1, C3, C4, C5
4~Diode_SMD:D_1206_3216MetricD1, D2, D3, D4
26k8Resistor_SMD:R_0805_2012MetricR2, R3
110мкГнInductor_SMD:L_Coilcraft_LPS5030L1
13k9Resistor_SMD:R_0603_1608MetricR4
149,9kResistor_SMD:R_0603_1608MetricR1
15k1Resistor_SMD:R_0603_1608MetricR5
1LN2220_Package_TO_SOT_SMD:SOT-23-6V1
1~Capacitor_SMD:C_0603_1608MetricC2

More from minamonra/MKiCadPro

9
  • 2 layers142 × 78 mmPsu2psu01, the printed circuit board in 3D

    Psu2psu01

    minamonra/MKiCadPro

    MKiCadPro

    130 parts
  • 2 layers110 × 45 mmKill control, the printed circuit board in 3D

    Kill control

    minamonra/MKiCadPro

    MKiCadPro

    74 parts
  • 2 layers198 × 53 mmFeron lb019, the printed circuit board in 3D

    Feron lb019

    minamonra/MKiCadPro

    MKiCadPro

    54 parts
  • 2 layers126 × 78 mmPsu2psu02, the printed circuit board in 3D

    Psu2psu02

    minamonra/MKiCadPro

    MKiCadPro

    53 parts
  • 2 layers67 × 34 mmOtopto01, the printed circuit board in 3D

    Otopto01

    minamonra/MKiCadPro

    MKiCadPro

    23 parts
  • 2 layers5 × 8.2 mmRs485ch340usb, the printed circuit board in 3D

    Rs485ch340usb

    minamonra/MKiCadPro

    MKiCadPro

    22 parts
  • 2 layers38 × 16 mmFan 555s, the printed circuit board in 3D

    Fan 555s

    minamonra/MKiCadPro

    MKiCadPro

    12 parts

Similar boards

  • 2 layers80 × 80 mmKubisat power v2, the printed circuit board in 3D

    Kubisat power v2

    gredzikk/kubisat

    Hardware and software of cubesat model for engineering thesis

    82 parts2MIT
  • 2 layers28.3 × 39.8 mmLevelShifter, the printed circuit board in 3D

    LevelShifter

    gusmanb/logicanalyzer

    24 channel, 100Msps logic analyzer hardware and software

    21 parts5.1kGPL-3.0
  • 2 layers171.2 × 72.9 mmAmiga gfxcard before pour, the printed circuit board in 3D

    Amiga gfxcard before pour

    mntmn/amiga2000-gfxcard

    MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog

    21 parts1k
  • 2 layers93.9 × 46 mmRectifier, the printed circuit board in 3D

    Rectifier

    rene-dev/stmbl

    AC Servo Driver for STM32F4

    21 parts990GPL-3.0
  • 2 layers45.5 × 42.9 mmEsphome han reader, the printed circuit board in 3D

    Esphome han reader

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    21 parts915
  • 2 layers31.8 × 14.5 mmEsp prog, the printed circuit board in 3D

    Esp prog

    drandyhaas/KiCadRoutingTools

    A set of Python/Rust tools to aid routing in KiCad

    21 parts744MIT
  • 2 layers23.5 × 15.8 mmQuiverAttachPCB, the printed circuit board in 3D

    QuiverAttachPCB

    Arrow-air/project-quiver

    Project Quiver documentation, designs, and project artifacts.

    21 parts617CERN-OHL-S-2.0
  • 2 layers69.9 × 41.3 mmHeaterMeterLCD, the printed circuit board in 3D

    HeaterMeterLCD

    CapnBry/HeaterMeter

    HeaterMeter and LinkMeter Arduino BBQ Controller

    21 parts557MIT

Questions

How big is the Ln2220 PCB?

It measures 27 × 16 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Ln2220 use?

21 parts, built around the LN2220PAR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Ln2220 KiCad files?

From the minamonra/MKiCadPro repository on GitHub, at the commit this page was made from: the board is Power/ln2220_/ln2220.kicad_pcb and its schematic 2025/opamp-opto-test/otopto01/otopto01.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Ln2220 design in my own project?

Its repository states no licence, so its author keeps all rights: ask minamonra before reusing the design.