2 layers142 × 78 mm
2 layers30 × 35 mm
Tiny13fan button
minamonra/MKiCadProMKiCadPro
- Size
- 30 × 35 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 22
- Nets
- 14
- Pads
- 47
- Tracks, vias
- 75, 4
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 16 Jan 2024
- Updated
- 11 Apr 2026
Overview
Tiny13fan button is an open-source printed circuit board by minamonra, from the minamonra/MKiCadPro repository on GitHub. It is a 2-layer board of 30 × 35 mm with 22 parts on 14 nets, routed with 75 tracks and 4 vias.
It is built around the ATTINY13V-10SU. Its parts include 8 resistors, 5 connectors, 2 capacitors, 1 IC and 1 switch. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
1README
Power/feron_lb019/readme.mdБлок питания 24 вольт, 150 Ватт, обратноход на ШИМ OB2269, частота при R18=27кОм - 65кГц.
Возможные варианты ШИМки CR6841/2, SG6841/2, SG5841/2, L2268/9, LD7551 (без Rt).
Размер корпуса 200x55.
Parts
22| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 10k | Resistor_SMD:R_1206_3216Metric | R3, R5, R13 |
| 3 | 1k | Resistor_SMD:R_0805_2012Metric | R1, R2, R6 |
| 2 | LED | LED_SMD:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | VD3, VD4 |
| 2 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2 |
| 1 | 10k | lib:switch_out | R7 |
| 1 | 12V | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | 1u | Capacitor_SMD:C_1206_3216Metric | C1 |
| 1 | 2N7002 | Package_TO_SOT_SMD:SOT-23 | VT1 |
| 1 | 470 | Resistor_SMD:R_1206_3216Metric | R4 |
| 1 | 47uF | Capacitor_Tantalum_SMD:CP_EIA-3528-12_Kemet-T | C3 |
| 1 | 5V | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J6 |
| 1 | ATtiny13V-10S | Package_DIP:DIP-8_W7.62mm_LongPads | U2 |
| 1 | CONN01PIN | _aDIPonTop:SMD1PIN | J1 |
| 1 | FAN | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | ON/OFF out | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J8 |
| 1 | SWITCH1 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | SW1 |
Questions
How big is the Tiny13fan button PCB?
It measures 30 × 35 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Tiny13fan button use?
22 parts, built around the ATTINY13V-10SU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Tiny13fan button KiCad files?
From the minamonra/MKiCadPro repository on GitHub, at the commit this page was made from: the board is Power/tiny13fan_button/tiny13fan_button.kicad_pcb and its schematic 2025/opamp-opto-test/otopto01/otopto01.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Tiny13fan button design in my own project?
Its repository states no licence, so its author keeps all rights: ask minamonra before reusing the design.
More from minamonra/MKiCadPro
9- 2 layers149.9 × 60 mm
- 2 layers110 × 45 mm
- 2 layers198 × 53 mm
- 2 layers126 × 78 mm
- 2 layers67 × 34 mm
- 2 layers5 × 8.2 mm
- 2 layers27 × 16 mm
- 2 layers38 × 16 mm
Similar boards
- 2 layers33 × 23 mm
- 2 layers35 × 14 mm
Fan controller
CRImier/MyKiCad
My KiCad boards. Can't be bothered uploading individually anymore, so here you go.
25 parts253GPL-3.0 - 2 layers158 × 11 mm
Daylight Matchstick
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
22 parts1.1kGPL-3.0 - 2 layers57 × 65 mm
Rgb to hdmi
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
22 parts1kGPL-3.0 - 2 layers81 × 57.2 mm
RP2040-Macropad
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
22 parts915 - 2 layers54.6 × 70.9 mm
BeagleLogic Cape
abhishek-kakkar/BeagleLogic
A Software Suite that implements a logic analyzer with the PRU on the BeagleBone / BeagleBone Black.
22 parts479GPL-3.0 - 2 layers66.4 × 24.5 mm
Connecting piece
Chrismettal/flipper-zero-backpacks
Backpack-style addon boards for the Flipper Zero!
22 parts456 - 2 layers51 × 70 mm
