2 layers101 × 57.8 mm
MusselGapeTracker RevF
millerlp/MusselGapeTracker_hardware
Mussel Gape Tracker circuit board designs
324 partsGPL-3.0
2 layers101 × 57.8 mm
MusselGapeTracker RevE
millerlp/MusselGapeTracker_hardwareMussel Gape Tracker circuit board designs
- Size
- 101 × 57.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 731
- Nets
- 176
- Pads
- 1,138
- Tracks, vias
- 2,310, 184
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 8 Dec 2023
- Updated
- 18 Mar 2025
Overview
MusselGapeTracker RevE is an open-source printed circuit board by millerlp, from the millerlp/MusselGapeTracker_hardware repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 101 × 57.8 mm with 731 parts on 176 nets, routed with 2,310 tracks and 184 vias.
It is built around the ATMEGA328-PU, 74HC595D and MCP1700T-3302E/TT(MS). Its parts include 38 resistors, 32 capacitors, 2 diodes, 1 IC and 1 connector. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
3
ATMEGA328-PU
PDIP-28-40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 23 2KB 32KB 8 Bit AVR Built-in FLASH PDIP-28 Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
74HC595D
SOP-16-40℃~+105℃ 1 100MHz 15ns@6V,50pF 2V~6V 74HC 8 Asynchronous clear function、Output enable Serial-to-Serial or Parallel Tri-State SOP-16 Shift Registers ROHSJSMSEMIShift Registers
MCP1700T-3302E/TT(MS)
SOT-23-40℃~+85℃@(Ta) 1 120uVrms 180mV@(300mA) 2uA 3.3V 300mA 5.5V 80dB@(100Hz) Fixed Over Current Protection、Over Temperature Protection Positive SOT-23 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMSKSEMIVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
README
README.mdMusselGapeTracker_hardware
Mussel Gape Tracker circuit board designs
Parts
731| Qty | Value | Footprint | References |
|---|---|---|---|
| 564 | @HOLE0, @HOLE1, @HOLE10, @HOLE11, @HOLE100, @HOLE101, @HOLE102, @HOLE103, @HOLE104, @HOLE105, @HOLE106, @HOLE107, @HOLE108, @HOLE109, @HOLE110, @HOLE111 +548 | ||
| 28 | 0.1µF | MusselGapeTracker_RevE:0603 | C3, C4, C5, C6, C23, C50, C51, C52, C53, C54, C55, C56, C57, C58, C59, C60 +12 |
| 24 | 10k Ω | MusselGapeTracker_RevE:R0603 | R3, R6, R14, R50, R51, R52, R53, R54, R55, R56, R57, R58, R59, R60, R61, R62 +8 |
| 20 | HALL_EFFECT_ALLEGRO_A139MLP/DFN-6 | MusselGapeTracker_RevE:A139*_HALL_EFFECT | A139_HALL0, A139_HALL1, A139_HALL2, A139_HALL3, A139_HALL4, A139_HALL5, A139_HALL10, A139_HALL11, A139_HALL12, A139_HALL13, A139_HALL14, A139_HALL15, A139_HALL16, A139_HALL17, A139_HALL18, A139_HALL19 +4 |
| 20 | PINHD-2X21.5MM_SILK | MusselGapeTracker_RevE:2X2_1.5MM | HALL0_HEADER0, HALL1_HEADER0, HALL2_HEADER0, HALL3_HEADER0, HALL4_HEADER0, HALL5_HEADER0, HALL10_HEADER0, HALL11_HEADER0, HALL12_HEADER0, HALL13_HEADER0, HALL14_HEADER0, HALL15_HEADER0, HALL16_HEADER0, HALL17_HEADER0, HALL18_HEADER0, HALL19_HEADER0 +4 |
| 16 | JST-4PINTH_STRAIGHT | MusselGapeTracker_RevE:JST-PH-4-THM | HALL0, HALL1, HALL2, HALL3, HALL4, HALL5, HALL6, HALL7, HALL8, HALL9, HALL10, HALL11, HALL12, HALL13, HALL14, HALL15 |
| 11 | PINHD-1X1SMALL | MusselGapeTracker_RevE:1X01_SMALL | GND0, PB7, U$3, U$4, U$6, U$7, U$8, U$9, U$10, U$11, U$17 |
| 4 | 10k | MusselGapeTracker_RevE:R0603 | R29, R31, R32, R33 |
| 3 | 100k Ω | MusselGapeTracker_RevE:R0603 | R4, R5, R15 |
| 3 | STAND-OFF4-40 | MusselGapeTracker_RevE:STAND-OFF | STANDOFF1, STANDOFF2, STANDOFF3 |
| 2 | 100 Ω | MusselGapeTracker_RevE:R0603 | R1, R2 |
| 2 | 1µF | MusselGapeTracker_RevE:PANASONIC_B | C1, C2 |
| 2 | 4.7k | MusselGapeTracker_RevE:R0603 | R7, R8 |
| 2 | 74HC595D | MusselGapeTracker_RevE:SO16 | SHIFT_0, SHIFT_1 |
| 2 | PUSHBUTTON_DPST_SMDSTANDARD | MusselGapeTracker_RevE:PUSHBUTTON_DPST_SMD | UNK1, UNK2 |
| 2 | STAND-OFFM2 | MusselGapeTracker_RevE:STAND-OFF_M2 | STANDOFF4_M2, STANDOFF5_M2 |
| 1 | 100k | MusselGapeTracker_RevE:R0603 | R34 |
| 1 | 10kΩ | MusselGapeTracker_RevE:R0603 | R28 |
| 1 | 10µF | MusselGapeTracker_RevE:0603 | C10 |
| 1 | 10µH | MusselGapeTracker_RevE:I_0805 | INDUCTOR0 |
| 1 | 15k | MusselGapeTracker_RevE:R0603 | R30 |
| 1 | 22-23-2021 | MusselGapeTracker_RevE:22-23-2021 | MOLEX_KK0 |
| 1 | 4.7µF | MusselGapeTracker_RevE:0603 | C25 |
| 1 | 74HC4067SM96 | MusselGapeTracker_RevE:SSOP24 | U$2 |
| 1 | ATMEGA328P | MusselGapeTracker_RevE:TQFP32-08 | U1 |
| 1 | AVR_SPI_PRG_6PTH | MusselGapeTracker_RevE:2X3 | J1 |
| 1 | BATTERY_4XAA | MusselGapeTracker_RevE:BATTERY_4XAA_PTH | PRIMARY_BATTERY0 |
| 1 | CR1220_BATTERY_HOLDERSMD | MusselGapeTracker_RevE:CR1220_BATTERY_HOLDER_SMD | CR1220_BATTERY0 |
| 1 | DS3231MSOIC-8 | MusselGapeTracker_RevE:DS3231M_SOIC8 | DS3231M0 |
| 1 | FTDI_HEADER | MusselGapeTracker_RevE:1X06-RIGHT_ANGLE | JP1 |
| 1 | GREEN_LED | MusselGapeTracker_RevE:CHIPLED_0805 | LED2 |
| 1 | KSC1623_BJT_TRANSISTOR | MusselGapeTracker_RevE:SOT23 | BJT0 |
| 1 | LTC4411TSOT-23_5-LEAD | MusselGapeTracker_RevE:TSOT-23_5-LEAD | LTC4411 |
| 1 | MCP1700T-3302E/TT | MusselGapeTracker_RevE:SOT95P237X112-3N | MCP1700T-3302 |
| 1 | MICROSD_MOLEX_REVERSECURRENT | MusselGapeTracker_RevE:MICROSD_SOCKET_MOLEX_REVERSEMOUNT | U$1 |
| 1 | MOSFET-PCHANNELBSH203 | MusselGapeTracker_RevE:SOT23-3 | P-FET0 |
| 1 | PINHD-1X4LOCK | MusselGapeTracker_RevE:1X04_LOCK | OLED0 |
| 1 | POWER_JACK_2,1MM | MusselGapeTracker_RevE:POWER_JACK_DC_2,1MM | UNK2,1MM_JACK0 |
| 1 | PUSHBUTTON_DPST_SMDSMALL | MusselGapeTracker_RevE:PUSHBUTTON_SPST_PTS525_SERIES | RESET0 |
| 1 | RED_LED | MusselGapeTracker_RevE:CHIPLED_0805 | LED1 |
| 1 | SCHOTTKY_DIODE_DO-214AC | MusselGapeTracker_RevE:DO214AC | SCHOTTKY0 |
| 1 | SOLDER_JUMPER_TRACESTANDARD | MusselGapeTracker_RevE:SJ_2S-TRACE | GROUND_CON0 |
More from millerlp/MusselGapeTracker_hardware
3- 2 layers72.5 × 57.8 mm
MusselGapeTracker RevG
millerlp/MusselGapeTracker_hardware
Mussel Gape Tracker circuit board designs
83 partsGPL-3.0 - 2 layers6.4 × 10.4 mm
Hall effect sensor board A139x
millerlp/MusselGapeTracker_hardware
Mussel Gape Tracker circuit board designs
4 partsGPL-3.0
Similar boards
- 2 layers208 × 58 mm
- 4 layers84 × 62 mm
Quad AMBE3000
m1geo/Quad-AMBE3000
A PCB for four DVSI AMBE-3000R Vocoders for use with WebSDRs/Audio transcoding
200 parts19MIT - 2 layers75 × 30 mm
Shift register breakout pcb
christrotter/shift-register-spi-breakout-pcb
Simple breakout board that gets you 16 rows and 16 cols for your QMK matrix.
29 parts13MIT - 6 layers499.5 × 326 mm
OLD obfuscated DontUse link
Jeo0/atg-client
automatic trajectory generator cross-platform client for acoustic volumetric displays (dis our thesis :))
548 parts3 - 4 layers92.3 × 99.8 mm
Bccc sao rp2350a
aerospace-venoms/BCCC_Temperature_SAO
Source files for reconstructing the Beverage Chilling Contraption Contest badge, released at Defcon 2026
109 parts1 - 4 layers40.3 × 57.1 mm
- 2 layers350 × 235 mm
Dogrudan sdr C
kocer/direct-sampling-sdr
Direct-sampling SDR transceiver with four phase-coherent channels, and a class-A power amplifier for 1.8 to 54 MHz.
406 parts1 - 2 layers97.2 × 60 mm
Robomas Controller board
ar216-2355/Robomas_Controller_board
stm32 cube ide の G474robomascontroller パッケージ と合わせて使う想定
125 parts
Questions
How big is the MusselGapeTracker RevE PCB?
It measures 101 × 57.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the MusselGapeTracker RevE use?
731 parts, built around the ATMEGA328-PU, 74HC595D and MCP1700T-3302E/TT(MS). The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the MusselGapeTracker RevE KiCad files?
From the millerlp/MusselGapeTracker_hardware repository on GitHub, at the commit this page was made from: the board is deprecated/KiCad_deprecated/MusselGapeTracker_RevE/MusselGapeTracker_RevE.kicad_pcb and its schematic KiCad_files/Hall_effect_sensor_board_A139x/Hall_effect_sensor_A139x.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the MusselGapeTracker RevE design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).