2 layers109 × 126.4 mm
RheoBoard v1.05
The-Hybrid-Atelier/RheoBoard
RheoBoard is open hardware for pneumatic retraction-extrusion measurements.
162 parts
4 layers100 × 100 mm
SmartUpPCB
mikh3x4/SmartUpPCBthis two may be needed to get submodule cloned
- Size
- 100 × 100 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 107
- Nets
- 90
- Pads
- 397
- Tracks, vias
- 1,036, 267
- Pours
- 5
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 23 May 2024
- Updated
- 6 Jun 2024
Overview
SmartUpPCB is an open-source printed circuit board by mikh3x4, from the mikh3x4/SmartUpPCB repository on GitHub. It is a 4-layer board of 100 × 100 mm with 107 parts on 90 nets, routed with 1,036 tracks and 267 vias.
It is built around the DRV8870DDA, TPS562209DDCR and 2AD1T1A2M2QES, with the 74HCT595D, BH-18650-B5BA016 and LSM6DS3TR-C among its other parts. Its parts include 42 capacitors, 20 resistors, 13 ICs, 9 transistors and 6 diodes. It belongs with the RP2040 boards of this library.
Main components
12
DRV8870DDA
SO-8-40℃~+125℃ 1 3.6A 565mΩ 6.5V~45V 6.5V~45V Bipolar Driver Overcurrent Protection、Short-Circuit Protection、Over temperature protection、Under-voltage lockout、Overvoltage Protection、Built-in charge pump、Power-on reset、Dead-time / shoot-through protection Yes SO-8 Stepper Motor Driver ROHSTexas InstrumentsStepper Motor Driver
TPS562209DDCR
SOT-23-THIN-6-40℃~+85℃@(TA) 1 2A 4.5V~17V 650kHz 765mV~7V Adjustable Buck Buck Built-in Yes SOT-23-THIN-6 DC-DC Converters ROHSTexas InstrumentsDC-DC Converters
2AD1T1A2M2QES
插件-30℃~+85℃ 120V 23.55mm 28V 3A 50,000 cycles Cylinder Lever DPDT PC Pin Through Hole 插件 Toggle Switches ROHSDailywellToggle Switches
74HCT595D
SOIC-16-40℃~+125℃ 1 25ns@4.5V,50pF 30MHz 4.5V~5.5V 500mW 6mA 74HCT 8 Serial-to-Serial or Parallel Tri-State SOIC-16 Shift Registers ROHSNexperiaShift RegistersBH-18650-B5BA016
--25~85℃ Battery holder Gold plating - Batter Holder ROHSMYOUNGButton And Strip Battery Connector
LSM6DS3TR-C
LGA-14(2.5x3)-40℃~+85℃ 1.71V~3.6V 16bit 3uA 4KB IMU (accelerometer + gyroscope) SPI、I2C X,Y,Z X,Y,Z ±16g ±2000dps 运动事件检测、同步与时间戳 LGA-14(2.5x3) Accelerometers ROHSSTMicroelectronicsAccelerometers
FXL0530-4R7-M
SMD,5.4x5.2mm4.5A 4.7uH 5A 60mΩ Molded inductor ±20% SMD,5.4x5.2mm Molding Power Inductors ROHScjiangPower Inductors
L7805CD2T-TR
TO-263-20℃~+125℃@(Tj) 1 1.5A 10uVrms 2V@(1A) 35V 5V 68dB@(120Hz) 8mA Fixed Over Temperature Protection、Short Circuit Protection Positive TO-263-2 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSSTMicroelectronicsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
SM04B-SRSS-TB(LF)(SN)
SMD,P=1mm,卧贴-25℃~+85℃ 1 1A 1mm 1x4P 2.9mm 4 4.32mm 4P 50V 6mm Auxiliary Solder Pin Copper alloy PA SH Surface Mount, Right Angle Tin UL94V-0 White SMD,P=1mm,卧贴 Wire To Board Connector ROHSJSTWire To Board Connector
AO3400A
SOT-23-55℃~+150℃ 1 N-channel 1.45V 1.4W 30V 48mΩ@2.5V 5.7A 50pF 630pF 75pF 7nC@10V N-Channel SOT-23 MOSFETs ROHSAlpha & Omega SemiconductorMOSFETsAO3401A
SOT-231 P-Channel 14nC@10V 30V 47mΩ@10V、60mΩ@4.5V、85mΩ@2.5V 4A 55pF 645pF 80pF 900mV SOT-23 MOSFETs ROHSAlpha & Omega SemiconductorMOSFETs
B6B-PH-K-S(LF)(SN)
插件,P=2mm-25℃~+85℃ 1 100V 13.9mm 1x6P 2A 2mm 4.5mm 6 6P 6mm Brass K Pin PA66 PH Through Hole Tin UL94V-0 White 插件,P=2mm Wire To Board Connector ROHSJSTWire To Board Connector
README
README.mdthis two may be needed to get submodule cloned
git submodule init git submodule update
Parts
107| Qty | Value | Footprint | References |
|---|---|---|---|
| 24 | 22u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C11, C13, C15, C30, C31, C32, C33, C36, C37, C38, C39, C40, C41, C42, C45, C46 +8 |
| 17 | 100n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2, C3, C4, C5, C14, C16, C25, C26, C27, C28, C29, C50, C51, C60, C61 +1 |
| 6 | 1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R21, R22, R23, R29, R30 |
| 5 | AO3400A | Package_TO_SOT_SMD:SOT-23 | Q21, Q22, Q23, Q24, Q25 |
| 4 | 0.27 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R7, R8, R9, R10 |
| 4 | AO3401A | Package_TO_SOT_SMD:SOT-23 | Q17, Q18, Q19, Q20 |
| 4 | B6B-PH-K-S(LF)(SN) | footprint:CONN-TH_B6B-PH-K-S | CN1, CN2, CN3, CN4 |
| 4 | DRV8870DDA | Package_SO:Texas_HTSOP-8-1EP_3.9x4.9mm_P1.27mm_EP2.95x4.9mm_Mask2.4x3.1mm_ThermalVias | U13, U15, U16, U17 |
| 4 | Jumper_3_Bridged12 | Jumper:SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mm | JP1, JP2, JP3, JP4 |
| 4 | Motor_Servo_JR | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | M5, M6, M7, M8 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 3 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3, R4, R25 |
| 3 | 220 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R17, R20, R27 |
| 3 | WRONG! | Diode_SMD:D_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1, D3, D7 |
| 2 | 100k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5, R6 |
| 1 | 2AD1T1A2M2QES | footprint:SW-TH_2AD1T1A2M2QES | U7 |
| 1 | 330n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C6 |
| 1 | 33k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R26 |
| 1 | 56k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2 |
| 1 | 74HCT595D | Package_SO:SOP-16_3.9x9.9mm_P1.27mm | U10 |
| 1 | BH-18650-B5BA016 | footprint:BAT-SMD_BH-18650-B5BA016 | U6 |
| 1 | C145232 | Diode_SMD:D_SMA_Handsoldering | D5 |
| 1 | C2843868 | LED_SMD:LED_RGB_5050-6 | D6 |
| 1 | C967633 | Package_LGA:LGA-14_3x2.5mm_P0.5mm_LayoutBorder3x4y | U12 |
| 1 | FXL0530-4R7-M | footprint:IND-SMD_L5.4-W5.2_FXL0530 | U5 |
| 1 | L7805CD2T-TR | footprint:TO-263-2_L10.0-W9.1-P5.08-LS15.2-TL | U3 |
| 1 | PWR | Diode_SMD:D_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D4 |
| 1 | Pico | MCU_RaspberryPi_and_Boards:RPi_Pico_SMD_TH | U1 |
| 1 | SM04B-SRSS-TB_(LF)(SN) | footprint:CONN-SMD_4P-P1.00_SM04B-SRSS-TB-LF-SN | U18 |
| 1 | SMD2920B500TF | footprint:F2920 | F2 |
| 1 | TPS562209DDCR | footprint:SOT-23-6_L2.9-W1.6-P0.95-LS2.8-BL | U4 |
Questions
How big is the SmartUpPCB PCB?
It measures 100 × 100 mm and has 4 copper layers, 1.6 mm thick.
What parts does the SmartUpPCB use?
107 parts, built around the DRV8870DDA, TPS562209DDCR, 2AD1T1A2M2QES and 74HCT595D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the SmartUpPCB KiCad files?
From the mikh3x4/SmartUpPCB repository on GitHub, at the commit this page was made from: the board is version_1.kicad_pcb and its schematic H_bridge.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the SmartUpPCB design in my own project?
Its repository states no licence, so its author keeps all rights: ask mikh3x4 before reusing the design.
Similar boards
- 2 layers426.3 × 163 mm
- 4 layers150 × 50 mm
- 4 layers100 × 50 mm
Chronolog
slemanz/chronolog
STM32-based temperature data logger with RTC, NOR flash storage, LCD and Wi-Fi. Hardware and firmware.
95 parts5 - 2 layers50 × 50.1 mm
- 2 layers116.3 × 102.2 mm
Ročníkový projekt S3E
HexCatDev/Rocnikovy_projekt
Po konzultaci s panem Máchou by bylo lepší Multiplexovat číslice 1:6 tzn. že v jednom okamžiku problikne jeden segment, takto se "probliká" každý segment zvlášť v určité rychlosti(Hz), od určité rychlosti ± 30 Hz se…
77 parts - 4 layers88 × 72 mm
- 2 layers68.6 × 53.3 mm
