Skip to the content
123

L7805CD2T-TR

STMicroelectronicsExtended

0℃~+125℃@(Tj) 1 1.5A 10uVrms 2V@(1A) 35V 5V 68dB@(120Hz) 8mA Fixed Over Temperature Protection、Short Circuit Protection Positive TO-263-2 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS

Part id
st/L7805CD2T-TR
Category
Voltage Regulators, Linear, Low Drop Out (LDO) Regulators
Package
TO-263-2
Pins
3
In stock
8,419 at JLCPCB (C15077)
Used on
4 open-source boards

Overview

The L7805CD2T-TR is a voltage Regulators, Linear, Low Drop Out (LDO) Regulator made by STMicroelectronics in a TO-263-2 package with 3 pins. 0℃~+125℃@(Tj) 1 1.5A 10uVrms 2V@(1A) 35V 5V 68dB@(120Hz) 8mA Fixed Over Temperature Protection、Short Circuit Protection Positive TO-263-2 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS.

PCBKit's library has its KiCad symbol (Regulator_Linear:L7805, from KiCad's library) and its footprint (Package_TO_SOT_SMD:TO-263-2, from KiCad's library), ready for a KiCad board. 8,419 are in stock at JLCPCB (part C15077). 4 open-source boards in 4 repositories on GitHub use it.

Symbol

1IN2GND3OUT
Regulator_Linear:L7805From KiCad's library

Footprint

123
Package_TO_SOT_SMD:TO-263-2From KiCad's library

From the datasheet

8
Supply, absolute maximum
35 V · VI, absolute maximum for VO = 5 to 18 V · p. 4
Junction, hottest
125 °C · Operating junction temperature, max for L78xxC · p. 4
Takes working
8 mA · Quiescent current, max at TJ = 25 °C, VI = 10 V, IO = 500 mA · p. 13
Gives
1.5 A · Output current, max · p. 1
Output
5 V · Fixed output voltage, typical at TJ = 25 °C · p. 13
Dropout
2 V · Dropout voltage, typical at IO = 1 A, TJ = 25 °C · p. 13
Junction to case (D²PAK)
3 K/W · Thermal resistance junction-case · p. 4
Junction to air (D²PAK)
62.5 K/W · Thermal resistance junction-ambient · p. 4

What it is and has

4
Output current
up to 1.5 A · p. 1
Protection
Thermal overload protection · p. 1
Protection
Short circuit protection · p. 1
Protection
Output transition SOA protection · p. 1

Specifications

22
ParameterConditionsAs printedPage
DC input voltage VIfor VO= 5 to 18 Vmax 35 V4
Storage temperature range TSTGmin -65 · max 150 °C4
Operating junction temperature range TOPfor L78xxC, L78xxACmin 0 · max 125 °C4
Thermal resistance junction-case RthJCD²PAKmax 3 °C/W4
Thermal resistance junction-ambient RthJAD²PAKmax 62.5 °C/W4
Output voltage VOTJ = 25 °C; VI = 10 V, IO = 500 mAmin 4.8 · typ 5 · max 5.2 V13
Output voltage VOIO = 5 mA to 1 A, VI = 7 to 18 V; TJ = 0 to 125 °Cmin 4.75 · typ 5 · max 5.25 V13
Output voltage VOIO = 1 A, VI = 18 to 20V, TJ = 25 °Cmin 4.75 · typ 5 · max 5.25 V13
Line regulation ∆VOVI = 7 to 25 V, TJ = 25 °C; IO = 500 mAtyp 3 · max 100 mV13
Line regulation ∆VOVI = 8 to 12 V, TJ = 25 °C; IO = 500 mAtyp 1 · max 50 mV13
Load regulation ∆VOIO = 5 mA to 1.5 A, TJ = 25 °C; VI = 10 Vmax 100 mV13
Load regulation ∆VOIO = 250 to 750 mA, TJ = 25 °C; VI = 10 Vmax 50 mV13
Quiescent current IdTJ = 25° C; VI = 10 V, IO = 500 mAmax 8 mA13
Quiescent current change ∆IdIO = 5 mA to 1 A; VI = 10 V, TJ = 0 to 125 °Cmax 0.5 mA13
Quiescent current change ∆IdVI = 7 to 23 V; IO = 500 mA, TJ = 0 to 125 °Cmax 0.8 mA13
Output voltage drift ∆VO/∆TIO = 5 mA; VI = 10 V, TJ = 0 to 125 °Ctyp -1.1 mV/°C13
Output noise voltage eNB = 10 Hz to 100 kHz, TJ = 25 °C; VI = 10 V, IO = 500 mAtyp 40 uV/VO13
Supply voltage rejection SVRVI = 8 to 18 V, f = 120 Hz; IO = 500 mA, TJ = 0 to 125 °Cmin 62 dB13
Dropout voltage VdIO = 1 A, TJ = 25 °Ctyp 2 V13
Output resistance ROf = 1 kHz; VI = 10 V, IO = 500 mA, TJ = 0 to 125 °Ctyp 17 mΩ13
Short circuit current IscVI = 35 V, TJ = 25 °Ctyp 0.75 A13
Short circuit peak current IscpTJ = 25 °C; VI = 10 Vtyp 2.2 A13

Open-source boards using it

4
  • 2 layers50 × 50.1 mmLumin node, the printed circuit board in 3D

    Lumin node

    HarkonenBade/lumin

    17 parts
  • 2 layers116.3 × 102.2 mmRočníkový projekt S3E, the printed circuit board in 3D

    Ročníkový projekt S3E

    HexCatDev/Rocnikovy_projekt

    Po konzultaci s panem Máchou by bylo lepší Multiplexovat číslice 1:6 tzn. že v jednom okamžiku problikne jeden segment, takto se "probliká" každý segment zvlášť v určité rychlosti(Hz), od určité rychlosti ± 30 Hz se…

    77 parts
  • 4 layers100 × 100 mmSmartUpPCB, the printed circuit board in 3D

    SmartUpPCB

    mikh3x4/SmartUpPCB

    this two may be needed to get submodule cloned

    107 parts
  • 2 layers68.6 × 53.3 mmArduino As Uno, the printed circuit board in 3D

    Arduino As Uno

    jrv/spijkstaal-controller

    DC motor controller, 3-5KW / 24V

    35 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the L7805CD2T-TR?

Yes. The symbol is Regulator_Linear:L7805 and the footprint Package_TO_SOT_SMD:TO-263-2, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the L7805CD2T-TR?

TO-263-2, with 3 pins. Its footprint is drawn on this page.

Where is the L7805CD2T-TR datasheet?

STMicroelectronics publishes it: the Datasheet link on this page opens it.

Where can I order the L7805CD2T-TR?

JLCPCB lists it as part C15077, with 8,419 in stock; the sellers' links on this page open their listings.

What can replace the L7805CD2T-TR?

Parts like it in the library: the L7805ABD2T-TR by STMicroelectronics, the CJ7805 by Jiangsu Changjing Electronics Technology (CJ), the L7805ACD2T-TR by STMicroelectronics and the L7905CD2T-TR by STMicroelectronics. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the L7805CD2T-TR?

4 boards in 4 repositories on GitHub; the most starred are listed on this page, with their KiCad files.