

Arduino As Uno
DC motor controller, 3-5KW / 24V
- Size
- 68.6 × 53.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 35
- Nets
- 25
- Pads
- 123
- Tracks, vias
- 281, 25
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 16 Oct 2017
- Updated
- 24 Nov 2017
Overview
Arduino As Uno is an open-source printed circuit board by jrv, from the jrv/spijkstaal-controller repository on GitHub. It is a 2-layer board of 68.6 × 53.3 mm with 35 parts on 25 nets, routed with 281 tracks and 25 vias.
It is built around the IR2184SPBF, L7805CD2T-TR and MC7815BD2TR4G, with the 1N5819HW-7-F-01 and MRA4007T3G-FS among its other parts. Its parts include 15 connectors, 8 capacitors, 4 resistors, 4 ICs and 3 diodes. It belongs with the robots and motor control boards of this library.
Main components
5IR2184SPBF
SOIC-8-40℃~+125℃ 1.4A 1.8A 10V~20V 1mA 2.7V 20ns 270ns 40ns 680ns 800mV Half-Bridge IGBT、MOSFET Under Voltage Protection SOIC-8 Gate Drivers ROHSInfineon TechnologiesGate Drive ICsL7805CD2T-TR
TO-263-20℃~+125℃@(Tj) 1 1.5A 10uVrms 2V@(1A) 35V 5V 68dB@(120Hz) 8mA Fixed Over Temperature Protection、Short Circuit Protection Positive TO-263-2 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSSTMicroelectronicsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsMC7815BD2TR4G
TO-263(D2PAK)-40℃~+125℃@(Tj) 1 15V 1A 2V@(1.0A) 3.5mA 30V 58dB@(120Hz) Fixed Over Current Protection、Over Temperature Protection Positive TO-263(D2PAK) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSonsemiVoltage Regulators - Linear, Low Drop Out (LDO) Regulators1N5819HW-7-F-01
SOD-123Schottky DiodesDiodes IncorporatedMRA4007T3G-FS
SMA(DO-214AC)Diodes - General PurposeFUXINSEMI
README
mosfets/README.mdThe design in this directory has been replaced by the one in directory "controller"
Parts
35| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 100nF | Capacitors_SMD:C_1206_HandSoldering | C2, C4, C5, C7, C9 |
| 4 | CONN_01X01 | Socket_Arduino_Uno:Arduino_1pin | P5, P6, P7, P8 |
| 4 | Conn_01x02 | Connectors_JST:JST_XH_B02B-XH-A_02x2.50mm_Straight | J3, J4, J6, J7 |
| 3 | 10K | Resistors_SMD:R_1206_HandSoldering | R2, R4, R5 |
| 2 | 1N5819HW-7-F | Diodes_SMD:D_SOD-123 | D2, D3 |
| 2 | 4u7 | Capacitors_THT:CP_Radial_D5.0mm_P2.00mm | C6, C8 |
| 2 | IR2184SPBF | SMD_Packages:SOIC-8-N | U3, U4 |
| 1 | 1A | Fuse_Holders_and_Fuses:Fuseholder5x20_horiz_open_Schurter_0031_8201 | F1 |
| 1 | 2200uF | Capacitors_THT:CP_Radial_D13.0mm_P5.00mm | C1 |
| 1 | 4K7 | Resistors_SMD:R_1206_HandSoldering | R3 |
| 1 | Analog | Socket_Arduino_Uno:Socket_Strip_Arduino_1x06 | P2 |
| 1 | Conn_01x03 | Connectors_JST:JST_XH_B03B-XH-A_03x2.50mm_Straight | J5 |
| 1 | Conn_01x05 | Connectors_JST:JST_XH_B05B-XH-A_05x2.50mm_Straight | J2 |
| 1 | Conn_01x08 | Connectors_JST:JST_XH_B08B-XH-A_08x2.50mm_Straight | J1 |
| 1 | Digital | Socket_Arduino_Uno:Socket_Strip_Arduino_1x08 | P4 |
| 1 | Digital | Socket_Arduino_Uno:Socket_Strip_Arduino_1x10 | P3 |
| 1 | L7805CD2T-TR | TO_SOT_Packages_SMD:ATPAK-2 | U2 |
| 1 | MC7815BD2TR4G | TO_SOT_Packages_SMD:ATPAK-2 | U1 |
| 1 | MRA4007T3G | Diodes_SMD:D_2114 | D1 |
| 1 | Power | Socket_Arduino_Uno:Socket_Strip_Arduino_1x08 | P1 |
More from jrv/spijkstaal-controller
1- 2 layers250 × 165.5 mm

Similar boards
- 2 layers50 × 50.1 mm

- 2 layers116.3 × 102.2 mm

Ročníkový projekt S3E
HexCatDev/Rocnikovy_projekt
Po konzultaci s panem Máchou by bylo lepší Multiplexovat číslice 1:6 tzn. že v jednom okamžiku problikne jeden segment, takto se "probliká" každý segment zvlášť v určité rychlosti(Hz), od určité rychlosti ± 30 Hz se…
77 parts - 4 layers100 × 100 mm

- 2 layers100 × 100 mm

BQ76pl455a
g-rahul/BQ76PL455A-EVM-Clone
This respository contains low cost design files for BQ76PL455A-EVM Clone.
255 parts5 - 2 layers89.7 × 53.5 mm

Ardui89 Cinque Uno
Cyrillinux/Ardui89
Adds 8051 architecture family to the Arduino IDE : STC89C52RC, STC89C516RD+, STC15W408AS-DIP16
57 parts2 - 2 layers51 × 70 mm

Auto dimmer
ilyushkin/auto_dimmer
Automatic dimmer for IKEA NYMANE (103.569.62) lamp based on AVR ATtiny13A MCU.
56 parts2GPL-3.0 - 2 layers100 × 100 mm

Kicad LFO 1 2
promesoft/KicadJE_LFO_1
Initial Analogue LFO - Mult/Mix - NAND/AND/NOT - FlipFlop - 555LFO
147 parts2MIT - 2 layers99.5 × 74 mm

Questions
How big is the Arduino As Uno PCB?
It measures 68.6 × 53.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Arduino As Uno use?
35 parts, built around the IR2184SPBF, L7805CD2T-TR, MC7815BD2TR4G and 1N5819HW-7-F-01. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Arduino As Uno KiCad files?
From the jrv/spijkstaal-controller repository on GitHub, at the commit this page was made from: the board is arduinoshield/Arduino_As_Uno.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Arduino As Uno design in my own project?
Its repository states no licence, so its author keeps all rights: ask jrv before reusing the design.