
Ardui89 Uno
Cyrillinux/Ardui89
Adds 8051 architecture family to the Arduino IDE : STC89C52RC, STC89C516RD+, STC15W408AS-DIP16

Adds 8051 architecture family to the Arduino IDE : STC89C52RC, STC89C516RD+, STC15W408AS-DIP16
Ardui89 Cinque Uno is an open-source printed circuit board by Cyrillinux, from the Cyrillinux/Ardui89 repository on GitHub. It is a 2-layer board of 89.7 × 53.5 mm with 57 parts on 70 nets, routed with 386 tracks and 26 vias.
It is built around the CH340G, LD1117S50TR(MS) and LP2985-33DBVR, with the MAL215371479E3, MRA4007T3G-FS and 1N5819W among its other parts. Its parts include 14 capacitors, 10 resistors, 9 diodes, 8 connectors and 4 ICs.
#Ardui89 8051 C IDE 0.4.2 for Arduino IDE
#Under GPL license
Adds 8051 architecture family to the Arduino IDE : STC89C52RC, STC89C516RD+, STC15W408AS-DIP16
Allows you to COMPILE a .ino file of the 8051 C family program and UPLOAD it into the STC89C5x, STC15..., etc. family.
#Versions 0.0.1 : first Mac OS try (compiling only) (Arch 8051 STC89C51RC(4kb) and STC89C52RC(8kb)) 0.0.6 : Mac OS completed (compiling and programming) 0.1.1 : tone function builtin, bugs fixed 0.2.0 : first windows try (compilling only) 0.2.1 : fist windows version completed (compilling and programming) 0.2.2 : Warning : new PINOUT for 805x Arduino equivalent and add STC32G12K128 = 8952 with 128k flash memory 0.2.3 : PINOUT fixed, bugs fixed. Variants STC15F2K32S2, STC32G12K128 fixed 0.3.0 : Replace stcflash by stcgal -> stc15 best process, add STC15W408AS-DIP16 0.3.1 : Bugs fixed 0.3.2 : Mini bugs fixed. Primary linux beta version ready : See dependencies packages installation. 0.3.3 : Mini bugs fixed. Speed uplaod bug fixed / choice speed upload menu added 0.3.7 : Add Serial.readString / Add push-pull output configuration for STC micro-controllers 0.3.8 : (25/04/25) Ardui89 Cinque-Uno replaced by Uno 5X, any bugs fixed 0.3.9 : (25/05/23) Any bugs fixed : compiling core problem on Mac OS Sequoia and Windows 11 0.3.10 : (25/05/27) Add int_to_string like function (same to_string but for int exclusively), and 8051/pgmspace.h 0.3.11 : (25/05/31) add STC89C516RD+ (62464 bytes (64kb-internal isp)) and 22.1184 Mhz clock option BETA 0.3.12 : (25/06/14) add #include <string.h> + Prévoir les STC15F2K16 et K32 et STC32G12k128. 0.4.0 : (25/07/27) better RAM management 0.4.1 : (25/10/16) add 29.4912 Mhz external and internal clock option 0.4.1.1 : (26/03/08) same 0.4.1, just UNO Cinque X Board Revision (R2) 0.4.2 : (26/05/16) analogRead and analogPin functions add for STC15 / pwd/tone compute modifed, based on F_CPU (not only 11059200Mhz) / new programme size compute. analogPin(A0) or pinMode(A0,INPUT_ANALOG) / analogRead(A0)
#Platforms MacOS, Wind'Oz. (Stable)
#To do analogWrite with ST15 and ST32 series. Stable Linux version.
#Installation and test
1/ Donwload Arduino >= V1.8.19
2/ Launch Arduino
3/ In Arduino->Preferences->Additional Board Manager URLS add for Arduino All Versions https://master.dl.sourceforge.net/project/stc89/packages/package_ardui89_index.json?viasf=1
4/ In Tools->Boards:...->Board Manager search "8051" select and install "ardui89 8051 family Boards"
5/ In Tools->Board:... select "Board : "STC89C52RC" "STC89C516RD+" "STC15W408AS-DIP16""
6/ Demos : Use Blink.ino in basics examples or in Ardui89_demos path : Hello.ino Howareyou.ino
and build and upload !#Linux Dependencies
python3 / python3-pip / stcgal / sdcc
Under terminal :
1/ Installing stcgal :
sudo apt-get install python3 python3-pip
sudo python3 -m pip stcgal
2/ Installing SDCC :
sudo apt-get install sdcc
#Important
Under Wind'Oz, using absoluty last version (>=3.8) of CH340 drivers (CH341SER.ZIP) (Included in this package).
Many thanks
Cyril BARBATO
https://sourceforge.net/projects/stc89 cyril.barbato@gmx.com
(Ardui89 Cinque Uno/Due/128k R0)
D : Arduino digital pins A : Arduino analog pins LED_BULTIN : D13 (P3.5)
D D A +---------------/--------------+ | | 7 P1.0 -------| 1 P1.0 VCC 40 |------ VCC 8 P1.1 -------| 2 P1.1 P0.0 39 |------ P0.0 (AD0) 31 A7 2 P1.2 -------| 3 P1.2 P0.1 38 |------ P0.1 (AD1) 30 A6 3 P1.3 -------| 4 P1.3 P0.2 37 |------ P0.2 (AD2) 29 A5 SCL 4 P1.4 -------| 5 P1.4 P0.3 36 |------ P0.3 (AD3) 28 A4 SDA 5 P1.5 (MOSI)-| 6 P1.5 (MOSI) P0.4 35 |------ P0.4 (AD4) 27 A3 6 P1.6 (MISO)-| 7 P1.6 (MISO) P0.5 34 |------ P0.5 (AD5) 26 A2 7 P1.7 (SCK)--| 8 P1.7 (SCK) P0.6 33 |------ P0.6 (AD6) 25 A1 RST -------| 9 RST P0.7 32 |------ P0.7 (AD7) 24 A0 0 P3.0 -------| 10 P3.0 (RXD) (VPP) EA 31 |------ EA (VPP) 1 P3.1 -------| 11 P3.1 (TXD) (PRG) ALE 30 |------ ALE (PRG) 10 P3.2 -------| 12 P3.2 (INT0) /PSEN 29 |------ /PSEN 11 P3.3 -------| 13 P3.3 (INT1) P2.7 28 |------ P2.7 (A15) 23 12 P3.4 -------| 14 P3.4 (T0) P2.6 27 |------ P2.6 (A14) 22 13 P3.5 -------| 15 P3.5 (T1) P2.5 26 |------ P2.5 (A13) 21 14 P3.6 -------| 16 P3.6 (WR) P2.4 25 |------ P2.4 (A12) 20 15 P3.7 -------| 17 P3.7 (RD) P2.3 24 |------ P2.3 (A11) 19 XTAL2 -------| 18 XTAL2 P2.2 23 |------ P2.2 (A10) 18 XTAL1 -------| 19 XTAL1 P P2.1 22 |------ P2.1 (A9) 17 GND -------| 20 GND P2.0 21 |------ P2.0 (A8) 16 +-------------------------------+
(Ardui89 UNO R0)
D : Arduino digital pins A : Arduino analog pins LED_BULTIN : D13 (P2.5) SDA : A4 (D22/P1.4) SCL : A5 (D23/P1.5)
A D D +---------------------_/--------------------+ 14 P2.6 -------| 1 P2.6 (CCP1) (CCP0_3) P2.5 28 |------- P2.5 13 15 P2.7 -------| 2 P2.7 (CCP2) (ECI_3) P2.4 27 |------- P2.4 12 A0 18 P1.0 -------| 3 P1.0 (RxD2) (MOSI_2) P2.3 26 |------- P2.3 11 A1 19 P1.1 -------| 4 P1.1 (TxD2) (MISO_2) P2.2 25 |------- P2.2 10 A2 20 P1.2 -------| 5 P1.2 (ECI) (SCLK_2) P2.1 24 |------- P2.1 9 A3 21 P1.3 -------| 6 P1.3 (MOSI) (RSTOUT_LOW) P2.0 23 |------- P2.0 8 A4 22 P1.4 -------| 7 P1.4 (MISO) (INT3/TxD_2/CCP2_2) P3.7 22 |------- P3.7 7 A5 23 P1.5 -------| 8 P1.5 (SCLK) (NT2/RxD_2/CCP1_2) P3.6 21 |------- P3.6 6 XT2 -------| 9 P1.6 (XTAL2) (T1/T0CLKO/CCP0_2) P3.5 20 |------- P3.5 5 XT1 -------| 10 P1.7 (XTAL1) (T0/T1CLKO/ECI_2) P3.4 19 |------- P3.4 4 16 RST -------| 11 P5.4 (MCLKO) (INT1) P3.3 18 |------- P3.3 3 Vcc -------| 12 Vcc (INT0) P3.2 17 |------- P3.2 2 17 P5.5 -------| 13 P5.5 (TxD/T2) P3.1 16 |------- P3.1 1 Gnd -------| 14 Gnd (RxD/INT4/T2CLKO) P3.0 15 |------- P3.0 0 +--------------------------------------------+
(Ardui89 MINI R0)
D : Arduino digital pins A : Arduino analog pins LED_BULTIN : D7 (P3.7) SDA : A4 (D12/P1.4) SCL : A5 (D13/P1.5)
D A A D +-----------------_/----------------+ 10 A2 P1.2 -------| 1 P1.2 P1.1 16 |------- P1.1 A1 9 11 A3 P1.3 -------| 2 P1.3 (MOSI) P1.0 15 |------- P1.0 A0 8 12 A4 P1.4 -------| 3 P1.4 (MISO) (/INT3-TxD2) P3.7 14 |------- P3.7 7 13 A5 P1.5 -------| 4 P1.5 (SLK) (/INT2-RxD2) P3.6 13 |------- P3.6 6 4 P5.4 -------| 5 P5.4 (INT1) P3.3 12 |------- P3.3 3 Vcc -------| 6 Vcc (INT0) P3.2 11 |------- P3.2 2 5 P5.5 -------| 7 P5.5 (TxD) P3.1 10 |------- P3.1 1 Gnd -------| 8 Gnd (RxD) P3.0 9 |------- P3.0 0 +------------------------------------+
| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 1k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R101, R103, R104, R130, R201, R202 |
| 6 | 100n | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C3, C4, C5, C102, C104, C203 |
| 3 | 10µ | BACKCIEL:C_2512_Pol_Tantale_Trainning | C1, C2, C200 |
| 3 | MountingHole | MountingHole:MountingHole_4.3mm_M4_DIN965 | H2, H3, H4 |
| 3 | SM34 | Diode_SMD:D_MELF | D2, D3, D200 |
| 2 | 1N5819W | Diode_SMD:D_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D101, D102 |
| 2 | 22p | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C103, C105 |
| 2 | 27p | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C201, C202 |
| 2 | 330 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R105, R106 |
| 2 | Extented Port | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J103, J105 |
| 2 | LOGO | PRJ:ardu89_logo_8mmx8mm | G***, G*** |
| 2 | MMBTA2907 | Package_TO_SOT_SMD:TSOT-23_HandSoldering | Q101, Q102 |
| 1 | 10µ | BACKCIEL:C_1206_POL_3216Metric_Pad1.33x1.80mm_HandSolder | C101 |
| 1 | 11.0592MHz | BACKCIEL:Crystal_HC49-U-3PinB_Vertical | X101 |
| 1 | 12MHz | Crystal:Crystal_HC49-4H_Vertical | X201 |
| 1 | 4k7 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R102 |
| 1 | 89C5x | Package_DIP:DIP-40_W15.24mm_LongPads | U101 |
| 1 | BUILTIN_LED | Diode_SMD:D_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D130 |
| 1 | CH340G | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U201 |
| 1 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J106 |
| 1 | Conn_01x16 | BACKCIEL:Ardu89_Uno_Analog_Power_Connector | J102 |
| 1 | Conn_01x19 | BACKCIEL:Ardu89_Uno_Digital_Connector | J101 |
| 1 | Extended Port | Connector_PinSocket_2.54mm:PinSocket_1x05_P2.54mm_Vertical | J104 |
| 1 | Jack-DC | Connector_BarrelJack:BarrelJack_Horizontal | J1 |
| 1 | LD1117S50TR | LD1117S50TR:SOT230P700X180-4N | U1 |
| 1 | LED | Diode_SMD:D_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D1 |
| 1 | LP2985-33DBVR | Package_TO_SOT_SMD:TSOT-23-5_HandSoldering | U2 |
| 1 | M20-9980346 | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | ICSP101 |
| 1 | Mounting Hole 4.3mm | MountingHole:MountingHole_4.3mm_M4_DIN965 | H1 |
| 1 | Rx LED | Diode_SMD:D_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D201 |
| 1 | SW_Push | Button_Switch_THT:SW_PUSH_6mm | SW101 |
| 1 | Tx LED | Diode_SMD:D_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D202 |
| 1 | USB_TYPE_B | Connector_USB:USB_B_Lumberg_2411_02_Horizontal | J201 |

Cyrillinux/Ardui89
Adds 8051 architecture family to the Arduino IDE : STC89C52RC, STC89C516RD+, STC15W408AS-DIP16

Cyrillinux/Ardui89
Adds 8051 architecture family to the Arduino IDE : STC89C52RC, STC89C516RD+, STC15W408AS-DIP16

Cyrillinux/Ardui89
Adds 8051 architecture family to the Arduino IDE : STC89C52RC, STC89C516RD+, STC15W408AS-DIP16

Cyrillinux/Ardui89
Adds 8051 architecture family to the Arduino IDE : STC89C52RC, STC89C516RD+, STC15W408AS-DIP16

Cyrillinux/Ardui89
Adds 8051 architecture family to the Arduino IDE : STC89C52RC, STC89C516RD+, STC15W408AS-DIP16

Cyrillinux/Ardui89
Adds 8051 architecture family to the Arduino IDE : STC89C52RC, STC89C516RD+, STC15W408AS-DIP16

Cyrillinux/Ardui89
Adds 8051 architecture family to the Arduino IDE : STC89C52RC, STC89C516RD+, STC15W408AS-DIP16


pavlovvalkan/AD7124-4BRUZ-RL-Based-PCB
AD7124-4BRUZ-RL Based PCB for Two 4-Wire P100 RTD Kelvin Measurement

brengi/CESE-PCB
Curso de Diseño de Circuitos Impresos de la Carrera de Especialización en Sistemas Embebidos

electrified/rcbus-opl3
An OPL3 sound card for RC2014/RCBus based computers, based on the Yamaha YMF262 and YAC512 ICs.

ECE411-Practicum-Group11/ECE411-PracticumProject-G11
Fall 2022 ECE 411 Practicum Project for Group 11


mahdi-kh1265/780nm-ecdl-electronics
Control, interface, piezo-actuation, and power electronics for POSM's 780 nm Littrow external-cavity diode laser.

It measures 89.7 × 53.5 mm and has 2 copper layers, 1.6 mm thick.
57 parts, built around the CH340G, LD1117S50TR(MS), LP2985-33DBVR and MAL215371479E3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Cyrillinux/Ardui89 repository on GitHub, at the commit this page was made from: the board is Boards/Ardui89_Cinque_Uno_Board_OLD/R1/Ardui89_Cinque_Uno.kicad_pcb and its schematic Boards/Ardui89_Cinque_Uno_Board_OLD/R0/Ardui89_Cinque_Uno.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Cyrillinux before reusing the design.