4 layers57 × 56.2 mm
2 layers24 × 8.6 mm
E24-receiver board
mikesmitty/electronics-projects1- Size
- 24 × 8.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 21
- Nets
- 23
- Pads
- 48
- Tracks, vias
- 157, 33
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 3 Jun 2024
- Updated
- 17 Jun 2025
Overview
E24-receiver board is an open-source printed circuit board by mikesmitty, from the mikesmitty/electronics-projects repository on GitHub. It is a 2-layer board of 24 × 8.6 mm with 21 parts on 23 nets, routed with 157 tracks and 33 vias.
README
README.mdelectronics-projects
Parts
21| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 505070-2422 | Local Library:5050702422 | J1 |
| 1 | AUX1 | Connector_Wire:SolderWirePad_1x01_SMD_1x2mm | J6 |
| 1 | AUX10 | Connector_Wire:SolderWirePad_1x01_SMD_1x2mm | J8 |
| 1 | AUX11 | Connector_Wire:SolderWirePad_1x01_SMD_1x2mm | J19 |
| 1 | AUX12 | Connector_Wire:SolderWirePad_1x01_SMD_1x2mm | J9 |
| 1 | AUX2 | Connector_Wire:SolderWirePad_1x01_SMD_1x2mm | J17 |
| 1 | AUX3 | Connector_Wire:SolderWirePad_1x01_SMD_1x2mm | J7 |
| 1 | AUX4 | Connector_Wire:SolderWirePad_1x01_SMD_1x2mm | J18 |
| 1 | CAP+ | Connector_Wire:SolderWirePad_1x01_SMD_1x2mm | J5 |
| 1 | GND1 | Connector_Wire:SolderWirePad_1x01_SMD_1x2mm | J11 |
| 1 | GND2 | Connector_Wire:SolderWirePad_1x01_SMD_1x2mm | J21 |
| 1 | LAMP_FRONT | Connector_Wire:SolderWirePad_1x01_SMD_1x2mm | J4 |
| 1 | LAMP_REAR | Connector_Wire:SolderWirePad_1x01_SMD_1x2mm | J16 |
| 1 | MOTOR+ | Connector_Wire:SolderWirePad_1x01_SMD_1x2mm | J13 |
| 1 | MOTOR- | Connector_Wire:SolderWirePad_1x01_SMD_1x2mm | J3 |
| 1 | SPEAKER+ | Connector_Wire:SolderWirePad_1x01_SMD_1x2mm | J20 |
| 1 | SPEAKER- | Connector_Wire:SolderWirePad_1x01_SMD_1x2mm | J10 |
| 1 | TRACK_LEFT | Connector_Wire:SolderWirePad_1x01_SMD_1x2mm | J2 |
| 1 | TRACK_RIGHT | Connector_Wire:SolderWirePad_1x01_SMD_1x2mm | J12 |
| 1 | U+ | Connector_Wire:SolderWirePad_1x01_SMD_1x2mm | J14 |
| 1 | VCC | Connector_Wire:SolderWirePad_1x01_SMD_1x2mm | J15 |
Questions
How big is the E24-receiver board PCB?
It measures 24 × 8.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the E24-receiver board use?
21 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the E24-receiver board KiCad files?
From the mikesmitty/electronics-projects repository on GitHub, at the commit this page was made from: the board is e24-receiver-board/e24-receiver-board.kicad_pcb and its schematic e24-receiver-board/e24-receiver-board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the E24-receiver board design in my own project?
Its repository states no licence, so its author keeps all rights: ask mikesmitty before reusing the design.
More from mikesmitty/electronics-projects
6- 2 layers70 × 70 mm
- 2 layers40 × 56.4 mm
- 4 layers19.6 × 8.6 mm
- 2 layers23 × 34 mm
- 2 layers42 × 16.8 mm
Similar boards
- 2 layers28.3 × 39.8 mm
LevelShifter
gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software
21 parts5.1kGPL-3.0 - 2 layers171.2 × 72.9 mm
Amiga gfxcard before pour
mntmn/amiga2000-gfxcard
MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog
21 parts1k - 2 layers93.9 × 46 mm
- 2 layers45.5 × 42.9 mm
Esphome han reader
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
21 parts915 - 2 layers31.8 × 14.5 mm
Esp prog
drandyhaas/KiCadRoutingTools
A set of Python/Rust tools to aid routing in KiCad
21 parts744MIT - 2 layers23.5 × 15.8 mm
QuiverAttachPCB
Arrow-air/project-quiver
Project Quiver documentation, designs, and project artifacts.
21 parts617CERN-OHL-S-2.0 - 2 layers69.9 × 41.3 mm
- 2 layers161.3 × 111.8 mm
