

HeaterMeterLCD
HeaterMeter and LinkMeter Arduino BBQ Controller
- Size
- 69.9 × 41.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 21
- Nets
- 38
- Pads
- 94
- Tracks, vias
- 215, 5
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 14 Apr 2011
- Updated
- 9 Aug 2025
Overview
HeaterMeterLCD is an open-source printed circuit board by CapnBry, from the CapnBry/HeaterMeter repository on GitHub, published under the MIT licence. It is a 2-layer board of 69.9 × 41.3 mm with 21 parts on 38 nets, routed with 215 tracks and 5 vias.
It is built around the 74HC595N and BS170. Its parts include 8 resistors, 4 switches, 3 diodes, 1 capacitor and 1 IC.
Main components
274HC595N
DIP-16-40℃~+85℃ 100ns@5V,50pF 10MHz 3.2V~6V 74HC Series 8 Asynchronous clear function、Output enable Serial-to-Parallel Tri-State DIP-16 Shift Registers ROHSHGSEMIShift RegistersBS170
TO-92-55℃~+150℃ 1 N-channel 1.2Ω@10V 17pF 2.1V 24pF 500mA 60V 7pF 830mW N-Channel TO-92 MOSFETs ROHSonsemiMOSFETs
README
READMEThis is the source code respository for the HeaterMeter and LinkMeter BBQ grill controllers. Documentation can be found in the wiki: https://github.com/CapnBry/HeaterMeter/wiki
+-----+ +-----+ +------+ |Probe| |Probe| |Blower| +-----+ +-----+ +------+ | | | 2.5mm jacks A +-------------+ | V | HeaterMeter |-----/ (arduino/heatermeter) R +-------------+ ========|=============== Serial UART +------------------+ | +------------+ | O | | linkmeterd | | (openwrt/package/linkmeter) p | +------------+ | e | | | /var/run/linkmeter.sock n | +------+ | W | | luci | | LUA in-process r | +--------+ | t | | uhttpd | | | +--------+ | +-----------------+
Source Layout 3d/* - 3D printed parts source files openwrt/* - Files you'd push to your router for LinkMeter arduino/* - AVR source code for upload to your Arduino board eagle/* - Hardware schematics and board files pebble/* - Source to the Pebble app tools/* - Miscellaneous scripts and .NET apps
Parts
21| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 220 | 0204_7 | R12, R15 |
| 1 | 0.1u | C025-025X050 | C10 |
| 1 | 10k | POT-CT6-SIDE | R6 |
| 1 | 1k | 0204_7 | R10 |
| 1 | 1k2 | 0204_7 | R8 |
| 1 | 1k8 | 0204_7 | R11 |
| 1 | 3k9 | 0204_7 | R2 |
| 1 | 74HC595N | DIL16 | IC3 |
| 1 | 8k2 | 0204_7 | R9 |
| 1 | BS170 | SOT54E | Q4 |
| 1 | DOWN | TACT-OMRON-12MM | S4 |
| 1 | GRN | LED3MM | LED3 |
| 1 | LCD | 1X16 | J1 |
| 1 | LCD1M | 1X05 | JP1 |
| 1 | LCD2M | 1X05 | JP8 |
| 1 | LEFT | TACT-OMRON-12MM | S2 |
| 1 | RED | LED3MM | LED1 |
| 1 | RIGHT | TACT-OMRON-12MM | S3 |
| 1 | UP | TACT-OMRON-12MM | S1 |
| 1 | YEL | LED3MM | LED2 |
More from CapnBry/HeaterMeter
1- 2 layers94.6 × 46.1 mm

Similar boards
- 4 layers130 × 131.3 mm

- 2 layers120 × 80 mm

- 2 layers160 × 125 mm

Reflex machine
Mhamednoui/PCB_Designer
AI-assisted KiCad PCB design pipeline: netlist -> schematic -> routed board -> fab files, with a 3D/simulation webview
125 parts - 2 layers218 × 218 mm

- 4 layers130 × 131.3 mm

Shuffleboard
rbala25/shuffleboard
Multiplayer Shuffleboard — Embedded Firmware (C), PCB Design, Mixed-Signal I/O, and Display + Audio Integration
72 parts - 2 layers78.4 × 64.8 mm

- 2 layers108 × 88 mm

- 2 layers87 × 96 mm

Braids through hole V1.1 CONTROL
sebastianbeyer/KOSMO_braids
This is a KOSMO (Look Mum No Computer) version of the Mutable instruments braids, based on the through-hole version done by sound-force.nl.
56 parts15
Questions
How big is the HeaterMeterLCD PCB?
It measures 69.9 × 41.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the HeaterMeterLCD use?
21 parts, built around the 74HC595N and BS170. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the HeaterMeterLCD KiCad files?
From the CapnBry/HeaterMeter repository on GitHub, at the commit this page was made from: the board is eagle/LCD/HeaterMeterLCD.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the HeaterMeterLCD design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).