Skip to the content
2 layers42 × 16.8 mmRp2040-decoder usb adapter, the printed circuit board in 3D

Rp2040-decoder usb adapter

mikesmitty/electronics-projects1
Size
42 × 16.8 mm
Copper layers
2
Thickness
1.6 mm
Parts
14
Nets
30
Pads
92
Tracks, vias
254, 30
Pours
2
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
3 Jun 2024
Updated
17 Jun 2025

Overview

Rp2040-decoder usb adapter is an open-source printed circuit board by mikesmitty, from the mikesmitty/electronics-projects repository on GitHub. It is a 2-layer board of 42 × 16.8 mm with 14 parts on 30 nets, routed with 254 tracks and 30 vias.

Its parts include 6 connectors, 4 resistors and 3 diodes. It belongs with the interfaces and adapters boards and the RP2040 boards of this library.

README

README.md

electronics-projects

Parts

14
QtyValueFootprintReferences
2220RResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR3, R4
25.1KResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR1, R2
1505070-2422Local Library:5050702422J1
1Backflow DiodeDiode_SMD:D_SOD-323_HandSolderingD1
1LAMP_FRONTLED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolderD2
1LAMP_REARLED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolderD3
1MISC1Connector_PinHeader_2.54mm:PinHeader_1x16_P2.54mm_VerticalJ4
1RAIL_PADSLocal Library:N_Gauge_RailJ8
1SPEAKERConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ3
1SWDConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ2
1USB_C_Receptacle_USB2.0_16PConnector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_HorizontalP1
1VCCTestPoint:TestPoint_Pad_3.0x3.0mmTP1

More from mikesmitty/electronics-projects

6
  • 4 layers57 × 56.2 mmRp2040-decoder, the printed circuit board in 3D

    Rp2040-decoder

    mikesmitty/electronics-projects

    599 parts1
  • 2 layers70 × 70 mmPanel, the printed circuit board in 3D

    Panel

    mikesmitty/electronics-projects

    277 parts1
  • 2 layers40 × 56.4 mmPanel, the printed circuit board in 3D

    Panel

    mikesmitty/electronics-projects

    231 parts1
  • 4 layers19.6 × 8.6 mmRp2040-decoder, the printed circuit board in 3D

    Rp2040-decoder

    mikesmitty/electronics-projects

    51 parts1
  • 2 layers23 × 34 mmWyt dongle, the printed circuit board in 3D

    Wyt dongle

    mikesmitty/electronics-projects

    28 parts1

Similar boards

  • 2 layers116.8 × 30 mmType d, the printed circuit board in 3D

    Type d

    google/mozc-devices

    Circuit diagrams and firmware source code for Gboard DIY keyboards

    14 parts3kApache-2.0
  • 2 layers32 × 22 mmDiff driver, the printed circuit board in 3D

    Diff driver

    rene-dev/stmbl

    AC Servo Driver for STM32F4

    14 parts990GPL-3.0
  • 2 layers34 × 45 mm2032Charger, the printed circuit board in 3D

    2032Charger

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    14 parts915
  • 2 layers34 × 109.9 mmTdisplay s3, the printed circuit board in 3D

    Tdisplay s3

    landonr/homeThing

    Wifi Smart Home Remotes that run on ESPHome

    14 parts551GPL-3.0
  • 2 layers45.3 × 42.7 mmMainPcb, the printed circuit board in 3D

    MainPcb

    adamb314/ServoProject

    Getting the most out of your hobby servo

    14 parts545
  • 2 layers42.5 × 28.8 mmC5VRX JACK DIY, the printed circuit board in 3D

    C5VRX JACK DIY

    Twotoz/C5VRX

    Ultra-minimal, zero-CPU 5.8 GHz analog FPV video receiver using ESP32-C5 Wi-Fi 6 PHY MODEM_DIAG, BitScrambler WBFM demodulation & resistor DAC CVBS

    14 parts515GPL-3.0
  • 2 layers62 × 24 mmMai button, the printed circuit board in 3D

    Mai button

    whowechina/mai_pico

    Pico controller for Maimai

    14 parts475

Questions

How big is the Rp2040-decoder usb adapter PCB?

It measures 42 × 16.8 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Rp2040-decoder usb adapter use?

14 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Rp2040-decoder usb adapter KiCad files?

From the mikesmitty/electronics-projects repository on GitHub, at the commit this page was made from: the board is rp2040-decoder-usb-adapter/rp2040-decoder-usb-adapter.kicad_pcb and its schematic e24-receiver-board/e24-receiver-board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Rp2040-decoder usb adapter design in my own project?

Its repository states no licence, so its author keeps all rights: ask mikesmitty before reusing the design.