
JRWatch
jadenrhee/JRWatch
Low-power BLE wearable: nRF52840 module + nPM1300 PMIC + BMI270 IMU + Sharp MIP display. 36 mm 4-layer board, ~15 µA projected sleep current, Zephyr firmware.

knob thermostat PCB Kicad
Thermostat pcb is an open-source printed circuit board by mikegormack, from the mikegormack/thermostat-pcb repository on GitHub. It is a 2-layer board of 70 × 110 mm with 103 parts on 50 nets, routed with 477 tracks and 57 vias.
It is built around the PBK-3-5, BME280 and MCP3221A5-E, with the RV-3028-C7, TXB0101DBV and WS2812B-2020 among its other parts. Its parts include 23 capacitors, 12 diodes, 7 resistors, 7 connectors and 6 ICs. It belongs with the home automation and IoT boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 15 | TestPoint | TestPoint:TestPoint_Pad_D1.5mm | TP1, TP2, TP3, TP4, TP5, TP6, TP7, TP8, TP9, TP10, TP11, TP15, TP16, TP17, TP18 |
| 14 | 100nF | Capacitor_SMD:C_0603_1608Metric | C1, C2, C7, C8, C9, C10, C11, C12, C13, C14, C15, C16, C17, C21 |
| 12 | MountingHole_3.2mm_M3 | MountingHole:MountingHole_3.2mm_M3 | , , , , , , , , , , , |
| 8 | WS2812B-2020 | LED_SMD:LED_WS2812B-2020_PLCC4_2.0x2.0mm | D3, D4, D5, D6, D7, D8, D9, D10 |
| 5 | NetTie_2 | NetTie:NetTie-2_SMD_Pad0.5mm | NT1, NT2, NT3, NT4, NT5 |
| 4 | , , , | ||
| 3 | ~ | TestPoint:TestPoint_Pad_D1.5mm | TP12, TP13, TP14 |
| 2 | 100R 1% | Resistor_SMD:R_0603_1608Metric | R4, R5 |
| 2 | 10K 1% | Resistor_SMD:R_0603_1608Metric | R6, R7 |
| 2 | 10uF | Capacitor_SMD:C_0805_2012Metric | C3, C4 |
| 2 | 1uF | Capacitor_SMD:C_0603_1608Metric | C5, C6 |
| 2 | 3K9 1% | Resistor_SMD:R_0603_1608Metric | R1, R2 |
| 2 | 691411410002 | mg:691411410002 | J3, J6 |
| 1 | 1.5mH | Inductor_THT:L_Radial_D12.0mm_P6.00mm_Murata_1900R | L1 |
| 1 | 10K 1% LOW TEMPCO | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | 1A 250VAC | Fuse:Fuse_2512_6332Metric | F1 |
| 1 | 1nF 500VAC Y1 | Capacitor_THT:C_Rect_L18.0mm_W6.0mm_P15.00mm_FKS3_FKP3 | C23 |
| 1 | 2.2uH | Inductor_SMD:L_1008_2520Metric_Pad1.43x2.20mm_HandSolder | L2 |
| 1 | 22uF | Capacitor_THT:CP_Radial_D10.0mm_P5.00mm | C22 |
| 1 | 330uF | Capacitor_SMD:CP_Elec_8x11.9 | C19 |
| 1 | 350VAC | Varistor:RV_Disc_D15.5mm_W5.9mm_P7.5mm | RV1 |
| 1 | 47mF | mg:FC0H473ZFTBR24_KEM | C18 |
| 1 | 5R 3A | Varistor:RV_Disc_D12mm_W5mm_P7.5mm | TH1 |
| 1 | 68uF | Capacitor_SMD:CP_Elec_6.3x9.9 | C20 |
| 1 | BC846 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | BME280 | Package_LGA:Bosch_LGA-8_2.5x2.5mm_P0.65mm_ClockwisePinNumbering | U2 |
| 1 | Conn_01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | Conn_01x04_Socket | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J4 |
| 1 | D_TVS | Diode_SMD:D_0603_1608Metric | D1 |
| 1 | FH12A-10S-0.5SH(55) | Connector_FFC-FPC:Hirose_FH12-10S-0.5SH_1x10-1MP_P0.50mm_Horizontal | J2 |
| 1 | G5NB | Relay_THT:Relay_SPST_Omron_G5NB | K1 |
| 1 | LL4148 | Diode_SMD:D_MiniMELF | D2 |
| 1 | MCP1700x-330xxMB | Package_TO_SOT_SMD:SOT-89-3 | U1 |
| 1 | MCP3221 | Package_TO_SOT_SMD:SOT-23-5 | U3 |
| 1 | PBK-3-5 | mg:CONV_PBK-3-5 | PS1 |
| 1 | RV-3028-C7 | Package_SON:MicroCrystal_C7_SON-8_1.5x3.2mm_P0.9mm | U5 |
| 1 | SMBJ7.0A | Diode_SMD:D_SMB | D11 |
| 1 | Screw_Terminal_01x02 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1-2-3.81_1x02_P3.81mm_Horizontal | J5 |
| 1 | SolderJumper_2_Bridged | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1 |
| 1 | TXB0101DBV | Package_TO_SOT_SMD:SOT-23-6 | U6 |
| 1 | US1M | Diode_SMD:D_SMA | D12 |
| 1 | USB_C_Plug_USB2.0 | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | P1 |
| 1 | ~ | mg:UEDX46460015-MD50E | U4 |

jadenrhee/JRWatch
Low-power BLE wearable: nRF52840 module + nPM1300 PMIC + BMI270 IMU + Sharp MIP display. 36 mm 4-layer board, ~15 µA projected sleep current, Zephyr firmware.

Isio-19/keebs
The repo of my custom keyboard, from the design of the pcb to the finished products

KrHaaland/GNSS_Alarm_Clock
GNSS-synchronized alarm clock — custom SAMD51J20A board with nPM1300 Li-ion power (USB-C), offline timezone+DST from coordinates, LVGL 9 on a 428x142 TFT, WAV alarm tunes over USB, battery-backed RTC

gameinstance/esp32-audio-player
An ESP32 stereo player powered by PCM56 DAC chips



zachrjt/digital-voltages-ps
Fixed 3.3V and 5V voltage power supply with voltage and current readout

bungernut/ESP32BrewRIMS
Preferred version is the WebApp. where ESP32 hosts a webserver that allows someone on the same network to enable heater or change set-point.
It measures 70 × 110 mm and has 2 copper layers, 1.6 mm thick.
103 parts, built around the PBK-3-5, BME280, MCP3221A5-E and RV-3028-C7. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the mikegormack/thermostat-pcb repository on GitHub, at the commit this page was made from: the board is thermostat-pcb.kicad_pcb and its schematic thermostat-pcb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask mikegormack before reusing the design.