
Digital voltages ps
zachrjt/digital-voltages-ps
Fixed 3.3V and 5V voltage power supply with voltage and current readout

Preferred version is the WebApp. where ESP32 hosts a webserver that allows someone on the same network to enable heater or change set-point.
ESPBrewRIMS PCB is an open-source printed circuit board by bungernut, from the bungernut/ESP32BrewRIMS repository on GitHub, published under the Unlicense licence. It is a 2-layer board of 71 × 51 mm with 50 parts on 38 nets, routed with 325 tracks and 13 vias.
It is built around the SMBJ7.0A. Its parts include 20 connectors, 18 resistors, 6 capacitors, 1 IC and 1 diode.
Preferred version is the WebApp. where ESP32 hosts a webserver that allows someone on the same network to enable heater or change set-point. I setup a hotspot on my phone that the EPS connects to and then the LCD displays the IP address to navigate to to get the App. MQTT version required a MQTT server on the same network to be running, it worked well, but was not easially portable.
I dont know why, but it's been a real pain to find documentation for the ESP32 device. I'm using a HiLetgo ESP32 OLED WiFi Kit V3. This is apparently really a product by Heltec: https://heltec.org/project/wifi-kit32-v3/
USB-Serial Driver: https://www.silabs.com/developer-tools/usb-to-uart-bridge-vcp-drivers
This library seems to be really important https://github.com/HelTecAutomation/Heltec_ESP32
None of their links work, so I'm going to try to scrape together what I can find:
ledc is a little weird but we're trying to use if for power control (https://docs.espressif.com/projects/arduino-esp32/en/latest/api/ledc.html). The range of settings is limited between freq and resolution. Run this script to get the output https://github.com/espressif/arduino-esp32/blob/master/libraries/ESP32/examples/AnalogOut/ledcFrequency/ledcFrequency.ino
Bit resolution | Min Frequency [Hz] | Max Frequency [Hz]
1 | 19532 | 20039138
2 | 9766 | 10019569
3 | 4883 | 5009784
4 | 2442 | 2504892
5 | 1221 | 1252446
6 | 611 | 626223
7 | 306 | 313111
8 | 153 | 156555
9 | 77 | 78277
10 | 39 | 39138
11 | 20 | 19569
12 | 10 | 9784
13 | 5 | 4892
14 | 3 | 2446| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | NA | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R3, R4, R5, R6, R7, R9, R11, R12, R14, R15, R17 |
| 9 | Conn_01x02 | Connector_Molex:Molex_SL_171971-0002_1x02_P2.54mm_Vertical | J1, J2, J3, J4, J5, J6, J14, J17, J19 |
| 6 | Conn_01x01_Pin | Connector_PinSocket_2.54mm:PinSocket_1x01_P2.54mm_Vertical | J8, J9, J10, J11, J12, J13 |
| 4 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R8, R13, R16 |
| 4 | MountingHole | MountingHole:MountingHole_3mm | H1, H2, H3, H4 |
| 3 | 1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4, C5, C6 |
| 3 | Conn_01x05 | Connector_Molex:Molex_SL_171971-0005_1x05_P2.54mm_Vertical | J15, J16, J18 |
| 2 | 0 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R10, R18 |
| 2 | C_Small | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C3 |
| 1 | 100uF | Capacitor_THT:CP_Radial_D8.0mm_P3.50mm | C1 |
| 1 | Digital LED | Connector_Molex:Molex_SL_171971-0005_1x05_P2.54mm_Vertical | J7 |
| 1 | Expansion | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J20 |
| 1 | SMBJ7.0A | Diode_SMD:D_SMA-SMB_Universal_Handsoldering | D1 |
| 1 | ~ | ESPBrew:DIP-36_907_ELL | U1 |

zachrjt/digital-voltages-ps
Fixed 3.3V and 5V voltage power supply with voltage and current readout




o7-machinehum/wifiwart
Linux SBC featuring two wifi radios, masquerading as a USB charger.

plantalytix/hardware
Hardware design documents for all plantalytix products. Created using KiCAD version 5 and 6.


It measures 71 × 51 mm and has 2 copper layers, 1.6 mm thick.
50 parts, built around the SMBJ7.0A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the bungernut/ESP32BrewRIMS repository on GitHub, at the commit this page was made from: the board is ESPBrewRIMS_PCB/ESPBrewRIMS_PCB.kicad_pcb and its schematic ESPBrewRIMS_PCB/ESPBrewRIMS_PCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the Unlicense licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).