2 layers115.1 × 69.2 mm
Boiler control v10
MountaineerGit/BoilerControl
Home assistant plugin for BoilerControl HW 1.3
55 parts
2 layers114 × 60 mm
Boiler control
MountaineerGit/BoilerControlHome assistant plugin for BoilerControl HW 1.3
- Size
- 114 × 60 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 57
- Nets
- 41
- Pads
- 178
- Tracks, vias
- 264, 43
- Pours
- 10
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 22 Dec 2023
- Updated
- 25 May 2024
Overview
Boiler control is an open-source printed circuit board by MountaineerGit, from the MountaineerGit/BoilerControl repository on GitHub. It is a 2-layer board of 114 × 60 mm with 57 parts on 41 nets, routed with 264 tracks and 43 vias.
It is built around the ACST210-8B, LD03-23B05R2 and MAX31865AAP+T, with the MOC3162M and SMBJ7.0A among its other parts. Its parts include 14 resistors, 9 capacitors, 9 connectors, 5 diodes and 4 ICs. It belongs with the ESP32 and RISC-V boards of this library.
Main components
5
ACST210-8B
DPAK-40℃~+125℃ 1.1V 100mW 10mA 10mA 2A 2V 800V 8A@50Hz DPAK Power Distribution Switches ROHSSTMicroelectronicsThyristors (SCR)/Modules
LD03-23B05R2
插件,25.4x25.4mmAC-DC Power ModulesYLPTEC
MAX31865AAP+T
SSOP-20-208mil-40℃~+125℃ 1 15 1LSB 2mA 3V~3.6V SPI Sigma-Delta Yes SSOP-20-208mil ADCs/DACs - Special Purpose ROHSMaxim Integrated (Analog Devices)Analog To Digital Converters (ADC)
MOC3162M
DIP-6-40℃~+85℃ 1 1.3V 1000V/us 4.17kV 600V 60mA TRIAC Yes DIP-6 Triac, SCR Output Optoisolators ROHSonsemiOptocouplers - Thyristor Signal Output
SMBJ7.0A
DO-214AA(SMB)-55℃~+150℃ 12V 200uA 50A@10/1000us 600W@10/1000us 7V 8.6V IEC 61000-4-2 TVS Unidirectional DO-214AA(SMB) ESD and Surge Protection (TVS/ESD) ROHShongjiachengESD And Surge Protection (TVS/ESD)
Parts
57| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J3V3, J5V1, JGND1, JGND2, JOWI1, JOWI2 |
| 5 | 1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R3, R7, R8 |
| 4 | 100n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C10, C11, C13, C14 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 3 | R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4, R5, R6 |
| 3 | Screw_Terminal_01x02 | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J_230V_in1, J_230V_PE1, J_Motor_out1 |
| 2 | 10nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C12, C15 |
| 2 | 4.3k 0.1% | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | Rref1, Rref2 |
| 2 | Conn_01x02_Socket | TerminalBlock_4Ucon:TerminalBlock_4Ucon_1x02_P3.50mm_Horizontal | J2, J3 |
| 2 | MAX31865AAP+T | MAX31865AAP_T:21-0056C_20_MXM | U1A1, U1B1 |
| 1 | 0031.8201 | Fuse:Fuseholder_Clip-5x20mm_Littelfuse_445-030_Inline_P20.50x5.20mm_D1.30mm_Horizontal | F1 |
| 1 | 100 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R21 |
| 1 | 10nF (X2) | Capacitor_SMD:C_2220_5650Metric_Pad1.97x5.40mm_HandSolder | C7 |
| 1 | 150u | Capacitor_SMD:CP_Elec_8x6.9 | C9 |
| 1 | 1u | Capacitor_SMD:C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C8 |
| 1 | 270 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R10 |
| 1 | 330 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R22 |
| 1 | 330 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | RGK2 |
| 1 | 360 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R11 |
| 1 | 39 1/2W | Resistor_SMD:R_2512_6332Metric_Pad1.40x3.35mm_HandSolder | RGK1 |
| 1 | 4k7 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R14 |
| 1 | ACST210 | Package_TO_SOT_SMD:TO-252-2 | D1 |
| 1 | Conn_01x01 | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J1 |
| 1 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JB1 |
| 1 | Conn_01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | JDisplay1 |
| 1 | D_Schottky | Diode_SMD:D_SMB_Handsoldering | D2 |
| 1 | LD03-23B05R2 | power_230v_5v_LD03_23B05R2:CONV_LD03-23B05R2 | PS1 |
| 1 | LED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D4 |
| 1 | MOC3162M | Package_DIP:DIP-6_W8.89mm_SMDSocket_LongPads | U4 |
| 1 | MOUDLE-SEEEDUINO-XIAO-ESP32C3 | xiao ESP32C3_PCB:flo_esp32s3 | U2 |
| 1 | RES SMD 12 OHM 5% 3W 2512 | Resistor_SMD:R_2512_6332Metric_Pad1.40x3.35mm_HandSolder | R12 |
| 1 | S10K350 | VRES_B722-350V_TDK:VRES_B722-350V_TDK | RV1 |
| 1 | SMBJ7.0A | Diode_SMD:D_SMB_Handsoldering | D3 |
| 1 | power_led | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D5 |
More from MountaineerGit/BoilerControl
1Similar boards
- 2 layers176 × 100 mm
SmartDesk v1p0
daverowntree/SmartDesk
I open sourced a design I made a few years back for a non-paying client. Use it as you see fit!
190 parts - 2 layers120 × 67 mm
Silvia pid board
haydenridd/silvia-pid-board
The following outlines: - Board circuit design - Hookup/wiring guide - Board mounting - BOM/Fabrication info
39 parts10MIT - 4 layers75 × 100 mm
- 2 layers85 × 94.5 mm
Digital voltages ps
zachrjt/digital-voltages-ps
Fixed 3.3V and 5V voltage power supply with voltage and current readout
79 parts2 - 2 layers71 × 51 mm
ESPBrewRIMS PCB
bungernut/ESP32BrewRIMS
Preferred version is the WebApp. where ESP32 hosts a webserver that allows someone on the same network to enable heater or change set-point.
50 partsUnlicense - 2 layers70 × 110 mm
- 6 layers95.9 × 90.2 mm
- 4 layers60 × 37 mm
Ff power pcb
o7-machinehum/wifiwart
Linux SBC featuring two wifi radios, masquerading as a USB charger.
60 parts184MIT
Questions
How big is the Boiler control PCB?
It measures 114 × 60 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Boiler control use?
57 parts, built around the ACST210-8B, LD03-23B05R2, MAX31865AAP+T and MOC3162M. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Boiler control KiCad files?
From the MountaineerGit/BoilerControl repository on GitHub, at the commit this page was made from: the board is boiler_control/boiler_control.kicad_pcb and its schematic boiler_control/boiler_control.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Boiler control design in my own project?
Its repository states no licence, so its author keeps all rights: ask MountaineerGit before reusing the design.