
TVCS Dev
Mig-M27/Avionics-PCBs
Este repositório é usado para gerir as versões dos projetos KiCAD do sistema de Avionics da Porto Space Team. Está dividido em 2 secções: 1.

Este repositório é usado para gerir as versões dos projetos KiCAD do sistema de Avionics da Porto Space Team. Está dividido em 2 secções: 1.
Digital is an open-source printed circuit board by Mig-M27, from the Mig-M27/Avionics-PCBs repository on GitHub. It is a 6-layer board of 85 × 88 mm with 166 parts on 92 nets, routed with 533 tracks and 3 vias.
It is built around the LM61460AASQRJRRQ1, INA181A4QDCKRQ1 and NCR420ZX, with the CYPD3177-24LQXQT, ST1L05APU33R and 3361P-1-102GLF among its other parts. Its parts include 15 resistors, 9 ICs, 7 capacitors, 6 diodes and 5 connectors.
Este repositório é usado para gerir as versões dos projetos KiCAD do sistema de Avionics da Porto Space Team. Está dividido em 2 secções:
| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | TestPoint | TestPoint:TestPoint_Pad_2.0x2.0mm | TP13, TP14, TP15, TP16, TP17, TP18, TP19, TP20, TP23, TP24, TP25, TP26, TP27, TP28, TP29, TP30 |
| 13 | 100n | Capacitor-0402:Capacitor_0402 | C_BT1, C_BT2, C_BT3, C_IN_HFI1, C_IN_HFI2, C_IN_HFI3, C_IN_HFI4, C_IN_HFI5, C_IN_HFI6, C12, C20, C21, C23 |
| 10 | 1u | Capacitor-0603:Capacitor_0603 | C_BIAS1, C_BIAS2, C_OUT1, C_VCC1, C_VCC2, C_VCC3, C17, C18, C19, C22 |
| 8 | 2k | Resistor-0402:RES_0402 | R3, R4, R6, R7, R9, R10, R17, R29 |
| 7 | 4.7u | Capacitor-1206:Capacitor_1206 | C_IN1, C_IN2, C_IN3, C_IN4, C_IN5, C_IN6, C24 |
| 6 | 100K | Resistor-0603:RES_0603 | R_FBT1, R_FBT2, R_FBT3, R_PG1, R_PG2, R_PG3 |
| 6 | 22u | Capacitor-0805:Capacitor_0805 | C_OUT3, C_OUT4, C_OUT6, C_OUT7, C_OUT10, C_OUT13 |
| 5 | TestPoint | Test Hook:KEYSTONE_5277 | TP45, TP46, TP47, TP48, TP49 |
| 4 | 10u | Capacitor-0805:Capacitor_0805 | C_OUT2, C_OUT5, C_OUT8, C_OUT11 |
| 4 | 1k | Resistor-0402:RES_0402 | R_FF1, R23, R24, R34 |
| 4 | 2.2u | Capacitor-0402:Capacitor_0402 | C32, C33, C34, C35 |
| 4 | 3361P-1-102GLF | 1k Potenciometro:TRIM_3361P-1-102GLF | VR3, VR4, VR5, VR6 |
| 4 | Conn_01x01_Socket | Pico_Conn1x1:Pico_01pin | J10, J11, J16, J17 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3_ISO7380_Pad_TopBottom | H1, H2, H3, H4 |
| 4 | VLMY1300-GS08 | LED-Yellow_VLMY1300-GS08:LEDC1608X100N | CR1, CR2, CR3, CR4 |
| 3 | 10u | Capacitor-4mm:Capacitor_4mm | C_IN-BLK1, C_IN-BLK2, C_IN-BLK3 |
| 3 | 33k2 | Resistor-0603:RES_0603 | R_RT1, R_RT2, R_RT3 |
| 3 | LM61460AASQRJRRQ1 | DCDC_LM61460:VQFN-HR14_RJR_TEX | U7, U8, U9 |
| 2 | 15u | Inductor-10.1x10:Inductor_10.1x10 | L_SW2, L_SW3 |
| 2 | 2.5m | Resistor-0805:RES_0805 | Rsense1, Rsense3 |
| 2 | 4.7uF | Capacitor-0402:Capacitor_0402 | CV14, CV15 |
| 2 | 470n | Capacitor-0402:Capacitor_0402 | C36, C37 |
| 2 | 47u | Capacitor-0805:Capacitor_0805 | C_OUT9, C_OUT12 |
| 2 | 5 | Resistor-0402:RES_0402 | R_BIAS1, R_BIAS2 |
| 2 | 50 | Resistor-0402:RES_0402 | R_BT1, R_BT2 |
| 2 | 50k | Resistor-0402:RES_0402 | R22, R30 |
| 2 | 5277 | Test Hook:KEYSTONE_5277 | TP50, TP51 |
| 2 | DMP2040USD-13 | DMP2040USD-13:SOIC127P600X175-8N | IC3, IC6 |
| 2 | RB095BGE | SchottkyDiode-RB095BGE:RD3P175SNFRATL | D5, D6 |
| 2 | RSX301L | Diode-Schottky_RSX301L:DIOM5026X220N | D2, D7 |
| 1 | 100 | Resistor-0402:RES_0402 | R_BT3 |
| 1 | 100k | Resistor-0603:RES_0603 | R_ENB1 |
| 1 | 100u | Capacitor-6mm:Capacitor_6mm | C_OUT14 |
| 1 | 100u | Capacitor-8mm:Capacitor_8mm | C_OUT15 |
| 1 | 10k | Resistor-0402:RES_0402 | R36 |
| 1 | 10u | Inductor-11.5x10:Inductor_11.5x10 | L_SW1 |
| 1 | 120 | Resistor-0603:RES_0603 | R_FBB6 |
| 1 | 12k6 | Resistor-0603:RES_0603 | R_FBB2 |
| 1 | 160 | Resistor-0402:RES_0402 | R41 |
| 1 | 1n | Capacitor-0402:Capacitor_0402 | C31 |
| 1 | 1uF | Capacitor-0402:Capacitor_0402 | CV16 |
| 1 | 2.2u | Inductor-10.1x10:Inductor_10.1x10 | L1 |
| 1 | 22k1 | Resistor-0603:RES_0603 | R_FBB3 |
| 1 | 22p | Capacitor-0402:Capacitor_0402 | C_FF1 |
| 1 | 30 | Resistor-0603:RES_0603 | R_FBB4 |
| 1 | 422k | Resistor-0402:RES_0402 | R_ENT3 |
| 1 | 45k3 | Resistor-0402:RES_0402 | R_ENB3 |
| 1 | 50 | Resistor-0603:RES_0603 | R_FBB5 |
| 1 | 54k2 | Resistor-0402:RES_0402 | R33 |
| 1 | 560u | Capacitor-8mm:Capacitor_8mm | C_OUT16 |
| 1 | 590k | Resistor-0402:RES_0402 | R_ENT2 |
| 1 | 63k4 | Resistor-0402:RES_0402 | R_ENB2 |
| 1 | 7.5m | Resistor-2512:RES_WSLP2512 | Rsense2 |
| 1 | 8k66 | Resistor-0603:RES_0603 | R_FBB1 |
| 1 | 931k | Resistor-0603:RES_0603 | R_ENT1 |
| 1 | 95 | Resistor-0402:RES_0402 | R37 |
| 1 | CYPD3177-24LQXQT | USBC-PD_CYPD3177:QFN50P400X400X60-25N-D | IC2 |
| 1 | DNP | Resistor-0402:RES_0402 | R5 |
| 1 | DX07S016JA1R1500 | USBC-DX07S016JA1:JAE_DX07S016JA1R1500 | J1 |
| 1 | INA181A4QDCKRQ1 | INA181A4QDCKRQ1:SOT65P210X110-6N | IC5 |
| 1 | NCR420ZX | LED-Driver_NCR420ZX:SOT230P700X180-4N | IC7 |
| 1 | SP3004-04XTG | TVS-SP3004:SOT563_LTF | D4 |
| 1 | ST1L05APU33R | LDO ST1L05A:DFN_5APU33R_STM | U5 |
| 1 | VLMS1500-GS08 | LED-Red_VLMS1500-GS08:LED_00-GS08_VIS_RED | LED1 |

Mig-M27/Avionics-PCBs
Este repositório é usado para gerir as versões dos projetos KiCAD do sistema de Avionics da Porto Space Team. Está dividido em 2 secções: 1.

Mig-M27/Avionics-PCBs
Este repositório é usado para gerir as versões dos projetos KiCAD do sistema de Avionics da Porto Space Team. Está dividido em 2 secções: 1.

Mig-M27/Avionics-PCBs
Este repositório é usado para gerir as versões dos projetos KiCAD do sistema de Avionics da Porto Space Team. Está dividido em 2 secções: 1.

Mig-M27/Avionics-PCBs
Este repositório é usado para gerir as versões dos projetos KiCAD do sistema de Avionics da Porto Space Team. Está dividido em 2 secções: 1.

Mig-M27/Avionics-PCBs
Este repositório é usado para gerir as versões dos projetos KiCAD do sistema de Avionics da Porto Space Team. Está dividido em 2 secções: 1.

Mig-M27/Avionics-PCBs
Este repositório é usado para gerir as versões dos projetos KiCAD do sistema de Avionics da Porto Space Team. Está dividido em 2 secções: 1.

LimesKey/parsnip-node
A portable LoRa communicator. Custom 4-layer PCB (ESP32-S3 + E22P-915M30S LoRa + NEO-M9N GNSS), designed in KiCad for 915 MHz.

CausticLime1/Debugging-Board
The purpose of this project is to develop a budget-friendly electronics debugging station that includes various PCBs (Printed Circuit Boards) that incorporate different functionalities.

Accelerator6666/Yaesu-FT2D-USBC-charge
检查日期:2026-10-26;KiCad 10.0.7;目标板厂:嘉立创 JLCPCB;目标工艺:4 层 PCB + SMT 代贴片。

danbrunski/canary
Four 25 F cells in series for CANary-PWR's LTC3350 hold-up, on a lead (design record: docs/CANary-PWR-Spec.md §P4). The board has no active parts: four cells, an NTC, two Kelvin net ties and a Micro-Fit 2 × 5 header.

bradencamp/ECE-Lab-USB-MultiTool
This USB Multi-function Laboratory Instrument will be inexpensive and therefore less capable than the AD2 or ADALM 2000 while still fulfilling the requirements for most laboratory exercises in the undergraduate ECE…


higg22-git/Project-Atlas
Four-layer STM32G474 control board that replaced the legacy electronics on BYU Formula SAE Electric's race car. KiCad schematic, layout and manufacturing package.

It measures 85 × 88 mm and has 6 copper layers, 1.6 mm thick.
166 parts, built around the LM61460AASQRJRRQ1, INA181A4QDCKRQ1, NCR420ZX and CYPD3177-24LQXQT. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Mig-M27/Avionics-PCBs repository on GitHub, at the commit this page was made from: the board is Boards/Development Boards/RP2040 P/Digital/Digital.kicad_pcb and its schematic Boards/Development Boards/RP2040 P/Digital/Digital.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Mig-M27 before reusing the design.