

ESP32 PeterDalmaris Board
- Size
- 89 × 67.2 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 92
- Nets
- 77
- Pads
- 338
- Tracks, vias
- 855, 164
- Pours
- 13
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 17 May 2025
- Updated
- 17 May 2025
Overview
ESP32 PeterDalmaris Board is an open-source printed circuit board by michelegiorgio, from the michelegiorgio/ESP32_board repository on GitHub, published under the CC0-1.0 licence. It is a 4-layer board of 89 × 67.2 mm with 92 parts on 77 nets, routed with 855 tracks and 164 vias.
It is built around the ESP32-C3-WROOM-02-H4, MCP73871EV and BME280, with the MAX4466EXK+T, W25Q32JVSSIQ and GSD090012SEU among its other parts. Its parts include 35 resistors, 23 capacitors, 7 ICs, 6 diodes and 5 connectors. It belongs with the ESP32 and RISC-V boards of this library.
Main components
12ESP32-C3-WROOM-02-H4
SMD,20x18mm-105dBm -40℃~+105℃ 2.4GHz 20.5dBm 345mA 3V~3.6V 82mA Bluetooth5.0 ESP32-C3 On-board PCB Antenna UART、SPI、I2C、I2S、USB SMD,20x18mm WiFi Modules ROHSEspressif SystemsWiFi ModulesMCP73871EV
-ModulesMicrochip TechnologyBME280
LGA-8(2.5x2.5)-40℃~+85℃ 0%RH~100%RH 1.71V~3.6V 1.8uA 16bit I2C、SPI ±0.5℃ ±3%RH LGA-8(2.5x2.5) Temperature and Humidity Sensor ROHSBoschTemperature And Humidity SensorMAX4466EXK+T
SC-70-5-40℃~+85℃ 0.03% 1-Channel 112dB 2.4V~5.5V 24A SC-70-5 Audio Amplifiers ROHSMaxim Integrated (Analog Devices)Audio AmplifiersW25Q32JVSSIQ
SOIC-8-208mil-40℃~+85℃ 100,000 cycles 133MHz 1uA 2.7V~3.6V 20 Years 32Mbit 3ms SPI SOIC-8-208mil NOR FLASH ROHSWinbondNOR FLASHGSD090012SEU
-2.95mm Connector and Ejector MicroSD Card (TF Card) Push-Pull With Locating Pins Yes - SD Card / Memory Card Connector ROHSAmphenolSD Card / Memory Card ConnectorTEMT6000X01
1206-40℃~+100℃ 1.05mm 2mm 3nA 4mm Light Intensity 1206 Ambient Light Sensors ROHSVishay IntertechnologyAmbient Light SensorsUSBLC6-2SC6
SOT-23-60.35pF、0.8pF 100nA 150W@8/20us 15V 2 5V 6A@8/20us 6V ESD SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)LTST-C170KGKT
0805-55℃~+85℃ 130° 20mA 2V 35mcd 571nm 574nm 75mW Discrete Diode Water Clear Yellow Green 0805 LED Indication - Discrete ROHSLite-OnLED Indication - DiscreteBC817
SOT-231 NPN 100nA 150MHz 300mW 40 45V 500mA 5V 700mV NPN SOT-23 Bipolar (BJT) ROHSShikuesBipolar (BJT)0ZCJ0110FF2E
1206-40℃~+85℃ 1.1A 100A 180mΩ 2.2A 40mΩ 800mW 8V 8s 1206 Resettable Fuses ROHSBel FuseResettable FusesB2B-PH-SM4-TB
SMD,P=2mm-25℃~+85℃ 1 100V 1x2P 2 2A 2P 2mm 6.6mm 7.95mm 7mm Auxiliary Solder Pin Beige Copper alloy PA PH Surface Mount,Vertical Tin UL94V-0 SMD,P=2mm Wire To Board Connector ROHSJSTWire To Board Connector
Parts
92| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 10k | Resistor_SMD:R_0805_2012Metric | R7, R8, R19, R25, R30, R32, R33, R34 |
| 6 | 100n | Capacitor_SMD:C_0805_2012Metric | C15, C16, C17, C21, C22, C23 |
| 6 | 470 | Resistor_SMD:R_0805_2012Metric | R9, R10, R11, R12, R16, R17 |
| 5 | 0.1u | Capacitor_SMD:C_0805_2012Metric | C1, C7, C10, C12, C14 |
| 5 | 10u | ESP32_Peter_dalmaris:CAPMP3216X180N | C5, C6, C11, C13, C24 |
| 4 | 50 | Resistor_SMD:R_0805_2012Metric | R18, R20, R21, R23 |
| 3 | 2k | Resistor_SMD:R_0805_2012Metric | R5, R26, R27 |
| 3 | LTST-C170KGKT | ESP32_Peter_dalmaris:DIOC200X125X110 | D4, D7, D8 |
| 2 | 1M | Resistor_SMD:R_0805_2012Metric | R28, R29 |
| 2 | 1u | Capacitor_SMD:C_0805_2012Metric | C9, C19 |
| 2 | 4.7k | Resistor_SMD:R_0805_2012Metric | R22, R24 |
| 2 | 4.7u | Capacitor_SMD:C_0805_2012Metric | C3, C4 |
| 2 | 5k1 | Resistor_SMD:R_0805_2012Metric | R1, R2 |
| 2 | BC817 | Package_TO_SOT_SMD:SOT-23 | Q2, Q3 |
| 2 | LTST-C170KBKT | ESP32_Peter_dalmaris:DIOC200X125X110 | D6, D9 |
| 1 | 0ZCJ0110FF2E | ESP32_Peter_dalmaris:0ZCJ0110FF2E | R35 |
| 1 | 100k | Resistor_SMD:R_0805_2012Metric | R31 |
| 1 | 100p | Capacitor_SMD:C_0805_2012Metric | C20 |
| 1 | 10n | Capacitor_SMD:C_0805_2012Metric | C18 |
| 1 | 110k | Resistor_SMD:R_0805_2012Metric | R4 |
| 1 | 1k | Resistor_SMD:R_0805_2012Metric | R13 |
| 1 | 20k | Resistor_SMD:R_0805_2012Metric | R6 |
| 1 | 22.1k | Resistor_SMD:R_0805_2012Metric | R14 |
| 1 | 330k | Resistor_SMD:R_0805_2012Metric | R3 |
| 1 | 4.7u | ESP32_Peter_dalmaris:CAPMP3216X180N | C25 |
| 1 | 47.5k | Resistor_SMD:R_0805_2012Metric | R15 |
| 1 | B2B-PH-SM4-TB | ESP32_Peter_dalmaris:JST_B2B-PH-SM4-TB | J2 |
| 1 | BME280 | Package_LGA:Bosch_LGA-8_2.5x2.5mm_P0.65mm_ClockwisePinNumbering | U6 |
| 1 | BOOT | ESP32_Peter_dalmaris:SW_TL3305AF260QG | S1 |
| 1 | CMC-5042PF-AC | ESP32_Peter_dalmaris:CUI_CMC-5042PF-AC | MK1 |
| 1 | CP2102N-Axx-xQFN20 | Package_DFN_QFN:SiliconLabs_QFN-20-1EP_3x3mm_P0.5mm_EP1.8x1.8mm | U3 |
| 1 | Conn_01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J4 |
| 1 | Conn_01x05_Pin | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J5 |
| 1 | ESP32-C3-WROOM-02-H4 | ESP32_Peter_dalmaris:MODULE_ESP32-C3-WROOM-02-H4 | U2 |
| 1 | GSD090012SEU | ESP32_Peter_dalmaris:AMPHENOL_GSD090012SEU | J3 |
| 1 | LM1117MPX-3.3 | ESP32_Peter_dalmaris:VREG_LM1117MPX-3.3 | VR1 |
| 1 | LTST-C170KRKT | ESP32_Peter_dalmaris:DIOC200X125X110 | D5 |
| 1 | MAX4466EXK | ESP32_Peter_dalmaris:SOT65P210X110-5N | U7 |
| 1 | MCP73871 | Package_DFN_QFN:QFN-20-1EP_4x4mm_P0.5mm_EP2.5x2.5mm | U1 |
| 1 | RESET | ESP32_Peter_dalmaris:SW_TL3305AF260QG | S2 |
| 1 | SS-52400-003 | ESP32_Peter_dalmaris:BELFUSE_SS-52400-003 | J1 |
| 1 | TEMT6000X01 | ESP32_Peter_dalmaris:TRANS_TEMT6000X01 | Q1 |
| 1 | Test CS | TestPoint:TestPoint_Pad_D1.0mm | TP5 |
| 1 | Test CS_SD | TestPoint:TestPoint_Pad_D1.0mm | TP4 |
| 1 | Test MISO | TestPoint:TestPoint_Pad_D1.0mm | TP2 |
| 1 | Test MOSI | TestPoint:TestPoint_Pad_D1.0mm | TP1 |
| 1 | Test SCLK | TestPoint:TestPoint_Pad_D1.0mm | TP3 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U4 |
| 1 | W25Q32JVSSIQ | ESP32_Peter_dalmaris:SOIC127P790X216-8N | U5 |
The 88 most common of 92 parts.
Similar boards
- 4 layers89 × 54.5 mm

- 4 layers90 × 54 mm

ESP - 32 IOT PCB
Raghav9git/ESP-32-IoT-PCB-Board-
A compact 4-layer IoT development board built around the ESP32-C3, integrating environmental sensing, local storage, USB-C power with LiPo battery management, and a programming/debug interface on a single board.
82 partsMIT - 4 layers77.5 × 59.5 mm

IOT
aryan-asit/Telemetry-iot-project
In this project , a 4 layer custom pcb is made for Telematics
85 parts1 - 4 layers82.9 × 53.8 mm

ESP32 IoT Project
EngMeesh/ESP32_IoT_Dev_Board
A custom 4-layer IoT development board based on the ESP32-C3, featuring integrated LiPo battery management, a CP2102N USB-UART bridge, MicroSD support, and onboard environmental/audio sensors for embedded engineering…
92 parts1MIT - 4 layers78.7 × 53.4 mm

ESP32-project
pravinsharma15k-ops/ESP32-C3-Sensor-Board
Battery-powered ESP32-C3 sensor board with USB-C charging, KiCad 10 design files
88 parts1 - 4 layers85.7 × 58.1 mm

ESP32 IoT 4-layer PCB
SarthakDas2006/ESP32-C3-IoT-Embedded-Custom_PCB
4-layer ESP32-C3 based custom embedded IoT PCB featuring onboard temperature & humidity, light, and audio sensing, USB Type-C, Li-Po charging, and external flash memory.
89 parts1 - 4 layers87.9 × 55.4 mm

KIcad 9 ESP32 custom board
JoseSanchez122/ESP32_custom_board
Custom ESP32-WROOM-32 PCB with DHT22 (temperature/humidity), BH1750 (light), and MPU-6050 (motion) sensors, 3.3V regulator, USB-C/battery input, Wi-Fi/Bluetooth, GPIO/I2C pins, LED, and reset button, for compact IoT…
87 parts - 4 layers89.3 × 63 mm

ESP32 ON BOARD SENSOR
krishnaverma24/ESP32-4Layer-PCB-Design
This project is a custom-designed PCB integrating the ESP32 microcontroller with multiple sensors on a single board. The goal was to create a compact, versatile hardware platform for IoT and embedded system experiments.
87 partsMIT
Questions
How big is the ESP32 PeterDalmaris Board PCB?
It measures 89 × 67.2 mm and has 4 copper layers, 1.6 mm thick.
What parts does the ESP32 PeterDalmaris Board use?
92 parts, built around the ESP32-C3-WROOM-02-H4, MCP73871EV, BME280 and MAX4466EXK+T. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ESP32 PeterDalmaris Board KiCad files?
From the michelegiorgio/ESP32_board repository on GitHub, at the commit this page was made from: the board is ESP32_PeterDalmaris_Board/ESP32_PeterDalmaris_Board.kicad_pcb and its schematic ESP32_PeterDalmaris_Board/ESP32_PeterDalmaris_Board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the ESP32 PeterDalmaris Board design in my own project?
Its repository publishes it under the CC0-1.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).