
Communicator pcb
Hack-a-Day/2025-Communicator_Badge
The 2025 Hackaday Supercon RF Communicator Badge

A two wheel robot using Rust on the Raspberry Pi Pico as the controller.
Rp pico sensor shield is an open-source printed circuit board by michaelkamprath, from the michaelkamprath/rp2040-rust-robot repository on GitHub. It is a 2-layer board of 87 × 65 mm with 45 parts on 41 nets, routed with 402 tracks and 0 vias.
It is built around the DMG2305UX. Its parts include 31 connectors, 2 capacitors, 2 resistors, 2 ICs and 1 transistor. It belongs with the robots and motor control and sensors and measurement boards and the RP2040 boards of this library.
Robot controller code in Rust for a two wheel robot driven by a Raspberry Pi Pico (RP2040).
This is a Work in Progress
This project is a fork of the rp2040-project-template. See the template's README.md for details on how to build the code found here for the RP2040.
Uses rusty-hook for precommit hooks.
The contents of this repository are dual-licensed under the MIT OR Apache
2.0 License. That means you can chose either the MIT licence or the
Apache-2.0 licence when you re-use this code. See MIT or APACHE2.0 for more
information on each specific licence.
Any submissions to this project (e.g. as Pull Requests) must be made available under these terms.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 17 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2, J3, J4, J5, J6, J7, J8, J10, J11, J12, J13, J14, J15, J16, J23, J25 +1 |
| 7 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J17, J18, J19, J20, J21, J22, J30 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3_ISO7380_Pad | H1, H2, H3, H4 |
| 2 | 10 µF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1, C2 |
| 2 | 100 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R2 |
| 2 | LOGO | LOGO | G***, G*** |
| 1 | AGND | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J28 |
| 1 | Barrel_Jack | Connector_BarrelJack:BarrelJack_Horizontal | J1 |
| 1 | Conn_01x03 | Connector_JST:JST_SH_BM03B-SRSS-TB_1x03-1MP_P1.00mm_Vertical | J29 |
| 1 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Horizontal | J31 |
| 1 | DMG2305UX | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | I2C0 | SM04B-SRSS-TB:CONN_SM04B-SRSS-TB_JST | J26 |
| 1 | I2C1 | SM04B-SRSS-TB:CONN_SM04B-SRSS-TB_JST | J27 |
| 1 | NCP1117-5.0_SOT223 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | Pico | MCU_RaspberryPi_and_Boards:RPi_Pico_SMD_TH | U2 |
| 1 | SW_Push | Button_Switch_THT:SW_PUSH_6mm | SW1 |
| 1 | Screw Terminal | CONN2_1760510000_WED:CONN2_1760510000_WED | J24 |

Hack-a-Day/2025-Communicator_Badge
The 2025 Hackaday Supercon RF Communicator Badge



hasenbanck/heteromycin
A 3D printer board using a powerfull STM32 MCU, TMC5160/TMC2160 driver and a Raspberry Pi or compatible SBC



m-labs/ionpak
A modern, low-cost universal controller for hot-cathode ionization vacuum gauges. (WIP)

It measures 87 × 65 mm and has 2 copper layers, 1.6 mm thick.
45 parts, built around the DMG2305UX. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the michaelkamprath/rp2040-rust-robot repository on GitHub, at the commit this page was made from: the board is hardware/rp-pico-sensor-shield/rp-pico-sensor-shield.kicad_pcb and its schematic hardware/rp-pico-sensor-shield/rp-pico-sensor-shield.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask michaelkamprath before reusing the design.