

KiCad PCB design for an open-loop DC sawtooth wave generator.
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 22
- Nets
- 21
- Pads
- 66
- Tracks, vias
- 96, 0
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 24 Oct 2026
- Updated
- 24 Oct 2026
Overview
Openloop is an open-source printed circuit board by michaelalim226, from the michaelalim226/open-loop-sawtooth-generator repository on GitHub. It is a 2-layer board with 22 parts on 21 nets, routed with 96 tracks and 0 vias.
It is built around the LM324 and NE555D. Its parts include 7 resistors, 6 connectors, 2 capacitors, 2 ICs and 1 diode.
Main components
2Parts
22| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2, R3, R4, R5, R6, R7 |
| 6 | Screw_Terminal_01x02 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J1, J2, J3, J4, J5, J6 |
| 3 | R_Potentiometer | Potentiometer_THT:Potentiometer_Vishay_T93YA_Vertical | RV2, RV3, RV4 |
| 2 | C | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C1, C2 |
| 1 | 1N4007 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D1 |
| 1 | LM324 | Package_DIP:DIP-14_W7.62mm | U2 |
| 1 | NE555D | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | R_Potentiometer | Potentiometer_THT:Potentiometer_Alps_RK09Y11_Single_Horizontal | RV1 |
Similar boards
- 2 layers14.7 × 9.7 mm

- 2 layers107 × 54 mm

- 2 layers140.7 × 47.4 mm

EG8010 A1
Millisman/EG8010
Collection of designs for the EG8010 (ASIC for single-phase SPWM control H-bridge)
201 parts17MIT - 2 layers175 × 115 mm

Laser Controllerv2 only for pcb test
Andre1Becker/GalvOS
Open-source ESP32-S3 laser show controller — built to replace proprietary OEM controllers in RGB galvo laser projectors
122 parts11GPL-3.0 - 4 layers189.4 × 59.1 mm

- 2 layers95 × 60 mm

- 2 layers39 × 66.5 mm

- 6 layers210 × 119 mm

Claculator Keypad
Robert-Mones/Claculator
A reverse Polish notation calculator with added features such as comparisons, branching, and custom recursive operators taken from the Clac project from the 15-122 course at Carnegie Mellon University.
202 parts5
Questions
What parts does the Openloop use?
22 parts, built around the LM324 and NE555D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Openloop KiCad files?
From the michaelalim226/open-loop-sawtooth-generator repository on GitHub, at the commit this page was made from: the board is openloop.kicad_pcb and its schematic openloop.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Openloop design in my own project?
Its repository states no licence, so its author keeps all rights: ask michaelalim226 before reusing the design.