2 layers50 × 50 mm
Driver
Miceuz/StepperOverDMX
A system to control a stepper motor over DMX protocol.
15 parts13Apache-2.0
2 layers130 × 60 mm
Controller
Miceuz/StepperOverDMX13A system to control a stepper motor over DMX protocol.
- Size
- 130 × 60 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 39
- Nets
- 61
- Pads
- 214
- Tracks, vias
- 430, 59
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 28 Apr 2016
- Updated
- 2 Sep 2019
Overview
Controller is an open-source printed circuit board by Miceuz, from the Miceuz/StepperOverDMX repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board of 130 × 60 mm with 39 parts on 61 nets, routed with 430 tracks and 59 vias.
It is built around the MAX3040CSE+ and 74LS165PC. Its parts include 11 capacitors, 7 connectors, 5 ICs, 4 resistors and 2 diodes. It belongs with the robots and motor control boards and the AVR (ATmega, ATtiny) boards of this library.
Main components
2
MAX3040CSE+
SOIC-160 0℃~+70℃ 250Kbps 4 4.75V~5.25V Driver SOIC-16 RS-485 / RS-422 ICs ROHSMaxim Integrated (Analog Devices)RS-485 / RS-422 ICs
74LS165PC
DIP-160.4mA 0℃~+70℃ 105mW 35MHz 4.75V~5.25V 47ns@5V,50pF 8 8mA Asynchronous parallel load function Complementary Parallel-to-Serial DIP-16 Shift RegistersTexas InstrumentsShift Registers
README
README.mdStepperOverDMX
A system to control a stepper motor over DMX protocol.
Parts
39| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 1u | Capacitors_SMD:C_0603_HandSoldering | C2, C3, C5, C6, C7, C8, C10, C11 |
| 3 | CP1 | Capacitors_ThroughHole:C_Radial_D10_L20_P5 | C1, C4, C9 |
| 2 | 330 | Resistors_SMD:R_0603_HandSoldering | R2, R3 |
| 2 | 74LS165 | Housings_SOIC:SOIC-16_3.9x9.9mm_Pitch1.27mm | U5, U6 |
| 2 | LED | LEDs:LED-3MM | D1, D2 |
| 2 | R | Resistors_SMD:R_0603_HandSoldering | R1, R4 |
| 1 | Arduino_Nano_Header | dip-sw:arduino_mini | J1 |
| 1 | CONN_01X02 | Pin_Headers:Pin_Header_Straight_1x02_Pitch3.96mm_Friction_Lock | P4 |
| 1 | CONN_01X03 | NC3MBH | P1 |
| 1 | CONN_01X03 | NC3FBH2 | P2 |
| 1 | CONN_01X07 | Pin_Headers:Pin_Header_Straight_1x07 | P3 |
| 1 | CONN_01X08 | Pin_Headers:Pin_Header_Straight_1x08 | P6 |
| 1 | CONN_01X10 | Pin_Headers:Pin_Header_Straight_1x10 | P5 |
| 1 | DIPS_10 | A6ER-1010 | SW1 |
| 1 | IL610 | Housings_SOIC:SOIC-8_3.9x4.9mm_Pitch1.27mm | U3 |
| 1 | MAX3040 | Housings_SOIC:SOIC-16_3.9x9.9mm_Pitch1.27mm | U4 |
| 1 | MAX5024 | Housings_SOIC:SOIC-8-1EP_3.9x4.9mm_Pitch1.27mm | U1 |
| 1 | POT | w_pth_resistors:trimmer_alps-rk09k1130ah1 | RV1 |
| 1 | R_PACK9_COMM | w_pth_resistors:r-sil_10 | RP1 |
| 1 | THERMISTOR | MC36201 | TH1 |
The 33 most common of 39 parts.
Questions
How big is the Controller PCB?
It measures 130 × 60 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Controller use?
39 parts, built around the MAX3040CSE+ and 74LS165PC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Controller KiCad files?
From the Miceuz/StepperOverDMX repository on GitHub, at the commit this page was made from: the board is controller/controller.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Controller design in my own project?
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from Miceuz/StepperOverDMX
1Similar boards
- 2 layers209 × 105 mm
Camera crane controller
Miceuz/camera-crane
Electronics of camera crane for stop motion animation
34 parts1 - 2 layers128.3 × 50.8 mm
CD32 Controller
BleuLlama/AmigaSchematics
Schematics of various Commodore Amiga related items
33 parts58MIT - 2 layers128.6 × 81 mm
- 2 layers
Panel old
dankar/altair8800
What started as a Intel 8080 emulator turned into a Altair 8800 emulator with associated hardware for a front panel.
103 parts31MIT - 2 layers254 × 134.6 mm
- 4 layers180.3 × 211.3 mm
For real 486
Xeraster/32bit_486_motherboard
A completely DIY 486 motherboard. Even the chipset is a DIY fpga thing. This version has a 32 bit front side bus and a 16 bit ISA bis
256 parts18GPL-3.0 - 2 layers100 × 100 mm
1551-III Pico
ytmytm/1551-rePico
Commodore 1551 disk-drive replacement for Plus/4, C16 and C116: Pico2 + 6510T + CPLD in a Pi1551-III case, host via tcbm2sd. Firmware/GCR derived from 1541-rePico.
80 parts16GPL-3.0 - 2 layers85.1 × 31.8 mm
Esp01Expander
ruenahcmohr/esp_01Expand32
esp-01 (esp8266) IO expander, 16 output, 16 input = 32
20 parts15