2 layers130 × 60 mm
Controller
Miceuz/StepperOverDMX
A system to control a stepper motor over DMX protocol.
39 parts13Apache-2.0
2 layers209 × 105 mm
Camera crane controller
Miceuz/camera-crane1Electronics of camera crane for stop motion animation
- Size
- 209 × 105 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 34
- Nets
- 114
- Pads
- 270
- Tracks, vias
- 691, 104
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 18 Jul 2016
- Updated
- 1 Aug 2016
Overview
Camera crane controller is an open-source printed circuit board by Miceuz, from the Miceuz/camera-crane repository on GitHub. It is a 2-layer board of 209 × 105 mm with 34 parts on 114 nets, routed with 691 tracks and 104 vias.
It is built around the MAX3040CSE+. Its parts include 9 resistors, 7 connectors, 4 capacitors, 4 ICs and 3 diodes. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
1README
README.mdcamera-crane
Electronics of camera crane for stop motion animation
Parts
34| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | R | Resistors_SMD:R_0603_HandSoldering | R1, R2, R3, R4, R5, R6 |
| 4 | C | Capacitors_SMD:C_0603_HandSoldering | C1, C2, C3, C4 |
| 4 | CONN_01X08 | neutrik:NE8FAH | P1, P2, P3, P4 |
| 4 | MAX3040 | Housings_SOIC:SOIC-16_3.9x9.9mm_Pitch1.27mm | U1, U2, U3, U4 |
| 3 | 1k | Resistors_SMD:R_0603_HandSoldering | R7, R8, R9 |
| 3 | LED | LEDs:LED-3MM | D1, D2, D3 |
| 3 | SW_PUSH | alps:SKHHLR | SW1, SW2, SW3 |
| 1 | Arduino_Mega_Header | w_conn_misc:arduino_mega_header | J1 |
| 1 | DB9 | alps:182-009-113 | J2 |
| 1 | DB9 | DB9MC | J3 |
The 30 most common of 34 parts.
Questions
How big is the Camera crane controller PCB?
It measures 209 × 105 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Camera crane controller use?
34 parts, built around the MAX3040CSE+. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Camera crane controller KiCad files?
From the Miceuz/camera-crane repository on GitHub, at the commit this page was made from: the board is crane-controller/camera-crane-controller.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Camera crane controller design in my own project?
Its repository states no licence, so its author keeps all rights: ask Miceuz before reusing the design.
Similar boards
- 2 layers142.5 × 106.4 mm
- 2 layers26 × 30 mm
Microcontroller
FrameworkComputer/ExpansionCards
Reference designs and documentation to create Expansion Cards for the Framework Laptop
34 parts1.1kCC-BY-4.0 - 2 layers171.2 × 72.9 mm
Amiga gfxcard old
mntmn/amiga2000-gfxcard
MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog
34 parts1k - 2 layers53.5 × 62.5 mm
Led matrix
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
34 parts915 - 2 layers45 × 26 mm
- 2 layers41.7 × 25.7 mm
Headphones flex pcb rigid
strangeparts/niubi-headphones
Flexible circuit board design for adding a headphone jack to an iPhone 7
34 parts493MIT - 2 layers18.8 × 16.3 mm
