2 layers130 × 60 mm
Controller
Miceuz/StepperOverDMX
A system to control a stepper motor over DMX protocol.
39 parts13Apache-2.0
2 layers50 × 50 mm
Driver
Miceuz/StepperOverDMX13A system to control a stepper motor over DMX protocol.
- Size
- 50 × 50 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 15
- Nets
- 26
- Pads
- 74
- Tracks, vias
- 131, 20
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 28 Apr 2016
- Updated
- 2 Sep 2019
Overview
Driver is an open-source printed circuit board by Miceuz, from the Miceuz/StepperOverDMX repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board of 50 × 50 mm with 15 parts on 26 nets, routed with 131 tracks and 20 vias.
It is built around the MAX3093N. Its parts include 4 capacitors, 3 connectors and 2 ICs. It belongs with the robots and motor control boards of this library.
Main components
1README
README.mdStepperOverDMX
A system to control a stepper motor over DMX protocol.
Parts
15| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 1u | Capacitors_SMD:C_0603_HandSoldering | C6, C7 |
| 1 | C | Capacitors_SMD:C_0603_HandSoldering | C3 |
| 1 | CONN_01X04 | w_conn_screw:mors_4p | P3 |
| 1 | CONN_01X06 | Socket_Strips:Socket_Strip_Straight_1x06 | P1 |
| 1 | CONN_02X03 | Pin_Headers:Pin_Header_Straight_2x03 | P2 |
| 1 | CP1 | Discret:CPR10X16 | C4 |
| 1 | MAX3093 | Housings_SOIC:SOIC-16_3.9x9.9mm_Pitch1.27mm | U2 |
| 1 | MAX5024 | Housings_SOIC:SOIC-8-1EP_3.9x4.9mm_Pitch1.27mm | U3 |
| 1 | POLOLU-DRV8825 | fresnel:DRV8825 | DRV1 |
| 1 | THERMISTOR | dip-sw:MC36201 | TH1 |
The 11 most common of 15 parts.
More from Miceuz/StepperOverDMX
1Similar boards
- 2 layers19 × 76 mm
Sub
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
15 parts3kApache-2.0 - 2 layers26.7 × 62.2 mm
Deniseadapter
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
15 parts1kGPL-3.0 - 2 layers100 × 44 mm
Videoslot
mntmn/amiga2000-gfxcard
MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog
15 parts1k - 2 layers91 × 51 mm
BusinessCard
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
15 parts915 - 2 layers24.3 × 57.9 mm
Flosspods pro flex
kenp-io/not-for-airpods-repairs
The content of this repository is licensed under the WTFPL License. Please have a close look at the terms before using this material.
15 parts609WTFPL - 2 layers20.3 × 15.2 mm
L0 Load
Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.
15 parts546MIT - 2 layers68 × 50 mm
EleLab v2 PowerFeed
Chrismettal/EleLab_v2
Cheap DIY lab system for hobbyists and the tinkering folk
15 parts531GPL-3.0 - 2 layers50.8 × 35.6 mm
Questions
How big is the Driver PCB?
It measures 50 × 50 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Driver use?
15 parts, built around the MAX3093N. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Driver KiCad files?
From the Miceuz/StepperOverDMX repository on GitHub, at the commit this page was made from: the board is driver/driver.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Driver design in my own project?
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).