
CD32 Controller
BleuLlama/AmigaSchematics
Schematics of various Commodore Amiga related items

The 74LS165PC is a shift Register made by Texas Instruments in a DIP-16 package with 16 pins. 0.4mA 0℃~+70℃ 105mW 35MHz 4.75V~5.25V 47ns@5V,50pF 8 8mA Asynchronous parallel load function Complementary Parallel-to-Serial DIP-16 Shift Registers.
PCBKit's library has its KiCad symbol (74xx:74LS165, from KiCad's library) and its footprint (Package_DIP:DIP-16_W8.89mm_SMDSocket_LongPads, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C3301363). 68 open-source boards in 51 repositories on GitHub use it.
| Pin | Name | Type |
|---|---|---|
| 1 | PL | Input |
| 2 | CP | Input |
| 3 | D4 | Input |
| 4 | D5 | Input |
| 5 | D6 | Input |
| 6 | D7 | Input |
| 7 | Q7 | Output |
| 8 | GND | Power in |
| 9 | Q7 | Output |
| 10 | DS | Input |
| 11 | D0 | Input |
| 12 | D1 | Input |
| 13 | D2 | Input |
| 14 | D3 | Input |
| 15 | CE | Input |
| 16 | VCC | Power in |

BleuLlama/AmigaSchematics
Schematics of various Commodore Amiga related items


dankar/altair8800
What started as a Intel 8080 emulator turned into a Altair 8800 emulator with associated hardware for a front panel.


Xeraster/32bit_486_motherboard
A completely DIY 486 motherboard. Even the chipset is a DIY fpga thing. This version has a 32 bit front side bus and a 16 bit ISA bis

ytmytm/1551-rePico
Commodore 1551 disk-drive replacement for Plus/4, C16 and C116: Pico2 + 6510T + CPLD in a Pi1551-III case, host via tcbm2sd. Firmware/GCR derived from 1541-rePico.

ruenahcmohr/esp_01Expand32
esp-01 (esp8266) IO expander, 16 output, 16 input = 32

<iframe src="https://pcbkit.io/embed/parts/ti/74LS165PC" title="74LS165PC in PCBKit" width="100%" height="480" style="border:0;border-radius:12px" allow="fullscreen" loading="lazy"></iframe><img src="https://pcbkit.io/embed/parts/ti/74LS165PC.jpg" alt="74LS165PC" width="1200" height="900">[](https://pcbkit.io/parts/ti/74LS165PC)Yes. The symbol is 74xx:74LS165 and the footprint Package_DIP:DIP-16_W8.89mm_SMDSocket_LongPads, both drawn on this page. PCBKit places them on a board for you when you design with it.
DIP-16, with 16 pins. Its footprint is drawn on this page.
Texas Instruments publishes it: the Datasheet link on this page opens it.
JLCPCB lists it as part C3301363, with 0 in stock; the sellers' links on this page open their listings.
Parts like it in the library: the 74HC595N by HGSEMI, the SN74HC165N by Texas Instruments, the CD4094DN by HGSEMI and the HG74HC595N by HGSEMI. Check their datasheets: a part that fits the footprint may still differ in its ratings.
68 boards in 51 repositories on GitHub; the most starred are listed on this page, with their KiCad files.