

- Size
- 150 × 70 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 168
- Nets
- 116
- Pads
- 505
- Tracks, vias
- 1,789, 239
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 19 May 2016
- Updated
- 4 Jun 2016
Overview
DAS is an open-source printed circuit board by meowthink, from the meowthink/thermocouple repository on GitHub. It is a 2-layer board of 150 × 70 mm with 168 parts on 116 nets, routed with 1,789 tracks and 239 vias.
It is built around the SN74LV1T125DBVR-TP, MAX13053ESA+ and AD7792BRUZ, with the ADUM5401ARWZ, G3VM-61ER and NUP2115LT1G among its other parts. Its parts include 68 capacitors, 49 resistors, 20 ICs, 18 diodes and 12 connectors.
Main components
8SN74LV1T125DBVR-TP
SOT-23-5-40℃~+125℃ 1 1 1.6V~5.5V 1uA 2.7ns@5V,15pF 74LV 8mA 8mA Power-off isolation、Output enable、Level shifting Tri-State Unidirectional SOT-23-5 Buffers, Drivers, Receivers, Transceivers ROHSTECH PUBLICBuffers, Drivers, Receivers, TransceiversMAX13053ESA+
SOIC-8-40℃~+85℃ 1Mbps 72mA CAN Transceiver SOIC-8 CAN Transceivers ROHSMaxim Integrated (Analog Devices)CAN TransceiversAD7792BRUZ
TSSOP-16-40℃~+105℃ 16 1uA 2.7V~5.25V 3 4.17Hz 470Hz 4ppm/℃ 64kHz Built-in Built-in Built-in SPI Sigma-Delta Support Yes TSSOP-16 Analog to Digital Converters (ADC) ROHSAnalog DevicesAnalog To Digital Converters (ADC)ADUM5401ARWZ
SOIC-16-300mil-40℃~+105℃ 1 1Mbps 2500 25kV/us 3 SOIC-16-300mil Digital Isolators (with Power) ROHSAnalog DevicesDigital IsolatorsG3VM-61ER
SMD-6P-20℃~+85℃ 1.33V 1000MΩ 1ms 2.5A 2.5kV 200us 60V 65mΩ One normally open: 2A (SPST-NO) SMD-6P Solid State Relays (MOS Output) ROHSOmronSolid State Relays - MOS Output (PhotoMOS)NUP2115LT1G
SOT-23ESD And Surge Protection (TVS/ESD)TECH PUBLICMBR0530
SOD-1231 Independent 30V 5.5A 500mA 550mV@500mA 80uA@30V SOD-123 Schottky Diodes ROHSJiangsu Changjing Electronics Technology (CJ)Schottky DiodesMM3Z5V6S
SOD-323-65℃~+150℃ 1 Independent 1uA@2V 200Ω 300mW 40Ω 5.49V~5.73V 5.6V SOD-323 Zener Diodes ROHSonsemiZener Diodes
Parts
168| Qty | Value | Footprint | References |
|---|---|---|---|
| 30 | 0.1u | Capacitors_SMD:C_0805 | C3, C12, C14, C16, C18, C22, C24, C25, C27, C28, C30, C31, C33, C34, C36, C37 +14 |
| 21 | 10u | Capacitors_SMD:C_0805 | C2, C5, C11, C13, C15, C17, C23, C26, C29, C32, C35, C38, C41, C43, C47, C50 +5 |
| 9 | 1u | Capacitors_SMD:C_0805 | C4, C9, C10, C57, C59, C60, C61, C62, C63 |
| 9 | NUP2115L | TO_SOT_Packages_SMD:SOT-23 | D7, D8, D9, D10, D11, D12, D13, D16, D17 |
| 8 | 10K | footprints:Thermoresistor | R11, R14, R17, R20, R23, R26, R29, R35 |
| 8 | 4.99K | Resistors_SMD:R_0805 | R10, R13, R16, R19, R22, R25, R28, R34 |
| 8 | 470R | Resistors_SMD:R_0805 | R9, R12, R15, R18, R21, R24, R27, R33 |
| 8 | ASSR_45_1228_45_002 | footprints:SMD-8 | U6, U7, U8, U9, U10, U11, U12, U14 |
| 8 | CONN_01X02 | footprints:Thermocouple | P4, P5, P6, P7, P8, P9, P10, P12 |
| 6 | 4k7 | Resistors_SMD:R_0805 | R1, R2, R39, R40, R42, R45 |
| 4 | 0 | Resistors_SMD:R_0805 | R4, R37, R38, R46 |
| 3 | 1k | Resistors_SMD:R_0805 | R41, R43, R44 |
| 3 | 2k2 | Resistors_SMD:R_0805 | R48, R49, R50 |
| 2 | 10p | Capacitors_SMD:C_0805 | C45, C46 |
| 2 | 1k5 | Resistors_SMD:R_0805 | R31, R32 |
| 2 | 1n | Capacitors_SMD:C_0805 | C19, C21 |
| 2 | 301R | Resistors_SMD:R_0805 | R6, R8 |
| 2 | 470u | Capacitors_SMD:c_elec_10x10.5 | C0, C1 |
| 2 | 681R | Resistors_SMD:R_0805 | R5, R7 |
| 2 | BAV199LT1G | TO_SOT_Packages_SMD:SOT-23 | D5, D6 |
| 2 | CONN_01X04 | Pin_Headers:Pin_Header_Straight_1x04 | P1, P11 |
| 2 | LP5907_DBV_5 | footprints:LP5907_DBV_5 | U2, U18 |
| 2 | Led | LEDs:LED-5MM | D14, D15 |
| 2 | MM3Z3V6S | Diodes_SMD:SOD-323 | D3, D18 |
| 2 | SN74LV1T125DBVR | footprints:SN74LV1T125DBVR | U5, U21 |
| 1 | 0.01u | Capacitors_SMD:C_0805 | C8 |
| 1 | 10n | Capacitors_SMD:C_0805 | C20 |
| 1 | 1M | Resistors_SMD:R_0805 | R30 |
| 1 | 1SMA30CA | Diodes_SMD:SMA_Standard | D2 |
| 1 | 750 | Resistors_SMD:R_0805 | R36 |
| 1 | 7805 | Converters_DCDC_ACDC:DCDC-Conv_Recom_R-78HBxx-0.5 | U1 |
| 1 | 8MHz | Crystals:Crystal_HC49-SD_SMD | Y1 |
| 1 | AD7792BRUZ | footprints:AD7792BRUZ | U4 |
| 1 | ADUM5401ARWZ | footprints:ADUM5401WCRWZ | U3 |
| 1 | CONN_01X03 | Pin_Headers:Pin_Header_Straight_1x03 | P3 |
| 1 | CONN_02X03 | Pin_Headers:Pin_Header_Straight_2x03 | P2 |
| 1 | G3VM-61ER | footprints:SMD-6 | U16 |
| 1 | MAX13053ESA+ | footprints:MAX13053ESA+ | U13 |
| 1 | MBR0530 | Diodes_SMD:SOD-123 | D1 |
| 1 | MC9S08DZ_LC | LQFP-32_7x7mm_Pitch0.8mm | U15 |
| 1 | MM3Z5V6S | Diodes_SMD:SOD-323 | D4 |
| 1 | NC | Resistors_SMD:R_0805 | R3 |
| 1 | SN74HC138_PW_16 | footprints:SN74HC138_PW_16 | U19 |
| 1 | SST25VF512A-33-4 | Housings_SOIC:SOIJ-8_5.3x5.3mm_Pitch1.27mm | U20 |
Similar boards
- 4 layers44 × 48.1 mm

- 2 layers88.9 × 50.8 mm

Core16 LB
ageppert/Core16-Interactive-Core-Memory
Weave 16 bits of core memory and LEDs to interact with using a magnetic wand
130 parts5 - 2 layers199 × 15.5 mm

- 4 layers394 × 110 mm

Gpu cluster backplane
antmicro/gpu-cluster-backplane
This project contains open hardware design files for a PCB supporting power distribution in a cluster composed of GPUs. This board has been derived from an open source d1600e-psu-breakout created by Antmicro.
616 parts4Apache-2.0 - 2 layers85 × 85 mm

Core64c LB
ageppert/Core-64c-Compact-Interactive-Core-Memory-Badge
64 bits of core memory and LEDs to interact with directly using a magnetic wand.
162 parts1GPL-3.0 - 2 layers56 × 81.5 mm

Pipette tool
rodrigue-laboratory/pipette-tool-pcb
bash kicad-cli pcb export gerbers pipettetool.kicadpcb --output fab/gerbers kicad-cli pcb export drill pipettetool.kicadpcb --output fab/gerbers --format excellon
38 parts1BSD-3-Clause - 4 layers100 × 106 mm

Delivery robot 1
ECE49022Team22/delivery-robot-pcb
Delivery robot KiCad PCB project and reusable 3.3 V LDO module
181 parts - 4 layers65 × 56 mm

Sensor HAT
Eniemooo/Sensor-HAT
Open-hardware indoor air sensor (CO2, VOC/NOx, T/RH, light, sound): HAT for Raspberry Pi or standalone with Seeed XIAO + ESPHome. KiCad 10.
112 parts
Questions
How big is the DAS PCB?
It measures 150 × 70 mm and has 2 copper layers, 1.6 mm thick.
What parts does the DAS use?
168 parts, built around the SN74LV1T125DBVR-TP, MAX13053ESA+, AD7792BRUZ and ADUM5401ARWZ. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the DAS KiCad files?
From the meowthink/thermocouple repository on GitHub, at the commit this page was made from: the board is hardware/DAS.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the DAS design in my own project?
Its repository states no licence, so its author keeps all rights: ask meowthink before reusing the design.