

Keyboard
This is a drop-in pro micro replacement for any board that accepts a pro micro. The name is a misonmer as the "melmicro" is actually usb-c. # MelMicro supports both qfn and qfp mcus, i'm not liable for anything.
- Size
- 17.8 × 33 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 20
- Nets
- 51
- Pads
- 179
- Tracks, vias
- 478, 47
- Pours
- 9
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 17 Mar 2021
- Updated
- 14 Dec 2021
Overview
Keyboard is an open-source printed circuit board by MelindaBirkenstock, from the MelindaBirkenstock/melmicro repository on GitHub, published under the MIT licence. It is a 4-layer board of 17.8 × 33 mm with 20 parts on 51 nets, routed with 478 tracks and 47 vias.
It is built around the ATMEGA32U4-AU and ATMEGA32U4-MU. Its parts include 7 capacitors, 6 resistors, 2 ICs, 2 connectors and 1 crystal. It belongs with the keyboards and input boards and the AVR (ATmega, ATtiny) boards of this library.
Main components
2ATMEGA32U4-AU
QFP-44(10x10)-40℃~+85℃ 10bit 16MHz 1KB 2.5KB 2.7V~5.5V 26 32KB 8 Bit AVR Built-in FLASH QFP-44(10x10) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)ATMEGA32U4-MU
VQFN-44-EP(7x7)-40℃~+85℃ 10bit 16MHz 1KB 2.5KB 2.7V~5.5V 26 32KB 8 Bit AVR Built-in FLASH VQFN-44-EP(7x7) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
README
README.mdThis is a drop-in pro micro replacement for any board that accepts a pro micro. The name is a misonmer as the "melmicro" is actually usb-c.
MelMicro supports both qfn and qfp mcus, i'm not liable for anything.
THIS MUST BE RAN AS A 4 LAYER.
STEPS.
- Download "melmicro-panel.zip", This is the gerber file for melmicro panels that is required as jlc will not assemble single boards.
- Navigate to the "Bom and Placement Files" folder, download the BOM for either "panel-au.csv" or "panel-mu.csv".
- Download "panel-top-pos.csv", this is your placement file for the pcb manufacturer. These are the files necessary for pcba.
Parts
20| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C3, C4, C5 |
| 2 | 10k | Capacitor_SMD:C_0402_1005Metric | R1, R6 |
| 2 | 22k | Capacitor_SMD:C_0402_1005Metric | R3, R4 |
| 2 | 22pF | Capacitor_SMD:C_0402_1005Metric | C1, C2 |
| 2 | 5.1k | Capacitor_SMD:C_0402_1005Metric | R2, R5 |
| 2 | Conn_01x12 | Connector_PinSocket_2.54mm:PinSocket_1x12_P2.54mm_Vertical | J1, J2 |
| 1 | 10uF | Capacitor_SMD:C_0402_1005Metric | C6 |
| 1 | 1uF | Capacitor_SMD:C_0402_1005Metric | C7 |
| 1 | 500mA | Fuse:Fuse_1206_3216Metric | F1 |
| 1 | ATmega32U4-AU | Package_QFP:TQFP-44_10x10mm_P0.8mm | U2 |
| 1 | ATmega32U4-MU | Package_DFN_QFN:QFN-44-1EP_7x7mm_P0.5mm_EP5.2x5.2mm | U1 |
| 1 | Crystal_GND24_Small | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | HRO-TYPE-C-31-M-12 | Type-C:HRO-TYPE-C-31-M-12-Assembly | USB1 |
Similar boards
- 2 layers247.6 × 108.3 mm

- 2 layers242.4 × 75.7 mm

- 2 layers42.5 × 25 mm

Bad origin
brunostjohn/flatmaxxing
a tiny little CLI that helps you make all the files needed to manufacture PCBs at home
19 parts2WTFPL - 2 layers234.9 × 77.8 mm

- 2 layers87.8 × 59.8 mm

FreeDeck SMD 2020-02
FreeYourStream/freedeck-hardware
all the stuff you need to build your own FreeDeck
37 parts772 - 2 layers54 × 15 mm

Xyp gpib
xyphro/UsbGpib
Versatile, cheap and portable USB to GPIB converter (USBTMC class based)
25 parts690MIT - 4 layers40.6 × 17.8 mm

- 2 layers37.3 × 14.7 mm

FairberryMainboard
Dakkaron/Fairberry
The goal of this project is to add a BlackBerry Q10 keyboard to non-BlackBerry phones. While this can easily be adapted to suit any other phone with an USB port at the bottom, I will focus on releasing files for the…
15 parts365
Questions
How big is the Keyboard PCB?
It measures 17.8 × 33 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Keyboard use?
20 parts, built around the ATMEGA32U4-AU and ATMEGA32U4-MU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Keyboard KiCad files?
From the MelindaBirkenstock/melmicro repository on GitHub, at the commit this page was made from: the board is keyboard.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Keyboard design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).