

Grouch
- Size
- 247.6 × 108.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 111
- Nets
- 83
- Pads
- 482
- Tracks, vias
- 856, 51
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 25 Aug 2022
- Updated
- 25 Aug 2022
Overview
Grouch is an open-source printed circuit board by masonzack, from the masonzack/Terminal repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 247.6 × 108.3 mm with 111 parts on 83 nets, routed with 856 tracks and 51 vias.
It is built around the ATMEGA32U4-AU, ATMEGA32U4-MU and PRTR5V0U2X. Its parts include 46 switches, 45 diodes, 9 capacitors, 4 resistors and 3 ICs. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
3ATMEGA32U4-AU
QFP-44(10x10)-40℃~+85℃ 10bit 16MHz 1KB 2.5KB 2.7V~5.5V 26 32KB 8 Bit AVR Built-in FLASH QFP-44(10x10) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)ATMEGA32U4-MU
VQFN-44-EP(7x7)-40℃~+85℃ 10bit 16MHz 1KB 2.5KB 2.7V~5.5V 26 32KB 8 Bit AVR Built-in FLASH VQFN-44-EP(7x7) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)PRTR5V0U2X
SOT-143-55℃~+125℃ 0.3pF、0.8pF 100W 10V、15V 5V 6.5V 6A 80nA ESD IEC 61000-4-2、IEC 61000-4-5、IEC 61000-4-4 Three channels Unidirectional SOT-143 ESD and Surge Protection (TVS/ESD) ROHSTECH PUBLICESD And Surge Protection (TVS/ESD)
README
Grouch PCB/README.mdPelikan
Parts
111| Qty | Value | Footprint | References |
|---|---|---|---|
| 45 | D | Diode_SMD:D_SOD-123 | D0, D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22 +29 |
| 33 | 1U | MX_Only:MXOnly-1U-NoLED | K0, K1, K10, K11, K12, K13, K14, K15, K16, K17, K18, K21, K22, K23, K24, K25 +17 |
| 5 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C2, C3, C4, C5, C6 |
| 4 | 1.25U | MX_Only:MXOnly-1.25U-NoLED | K39, K40, K41, K42 |
| 2 | 1.5U | MX_Only:MXOnly-1.5U-NoLED | K9, K19 |
| 2 | 1.75U | MX_Only:MXOnly-1.75U-NoLED | K20, K44 |
| 2 | 10k | Resistor_SMD:R_0603_1608Metric | R5, R6 |
| 2 | 2.25U | MX_Only:MXOnly-2.25U-NoLED | K29, K30 |
| 2 | 22 | Resistor_SMD:R_0603_1608Metric | R3, R4 |
| 2 | 22pF | Capacitor_SMD:C_0603_1608Metric | C8, C9 |
| 1 | 10uF | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | 16MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | 1uF | Capacitor_SMD:C_0603_1608Metric | C7 |
| 1 | 2U | MX_Only:MXOnly-2U-NoLED | K2 |
| 1 | 500mA | Fuse:Fuse_1206_3216Metric | F1 |
| 1 | 7U | MX_Only:MXOnly-7U-NoLED | K43 |
| 1 | ATmega32U4-A | Package_QFP:TQFP-44_10x10mm_P0.8mm | U3 |
| 1 | ATmega32U4-M | Package_DFN_QFN:QFN-44-1EP_7x7mm_P0.5mm_EP5.2x5.2mm | U1 |
| 1 | Conn_01x04 | Connector_JST:JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | J1 |
| 1 | LOGO | random-keyboard-parts:silk | G*** |
| 1 | PRTR5V0U2X | random-keyboard-parts:SOT143B | U2 |
| 1 | SW_Push | random-keyboard-parts:SKQG-1155865 | SW1 |
Similar boards
- 2 layers344 × 124.5 mm

- 2 layers285 × 95.1 mm

- 2 layers285 × 95.1 mm

- 2 layers284.3 × 116.2 mm

- 2 layers285.7 × 95.5 mm

Jones
jpskenn/Jones
Row-staggered 60% keyboard with gapless R2-R3 row. GH60 case compatible.
249 parts12MIT - 2 layers285 × 95.1 mm

Nora
jpskenn/Nora
Narrow pitch keyboard with Choc switches and keycaps. GH60 compatible.
303 parts12MIT - 2 layers209.6 × 76.2 mm

Didaktik
calvin-mcd/Didaktik-40
a 40s keyboard inspired by the Didaktik computer & keyboard
129 parts9GPL-3.0 - 2 layers228.4 × 85 mm

LeChiffre
paindrivendev/le-yiffre
Le Yiffre is a modified hotswap Le Chiffre pcb as an experimental design with different thumb clusters.Thanks to tominabox1 for creating Le Chiffre Keyboard and making it open source.
108 parts8
Questions
How big is the Grouch PCB?
It measures 247.6 × 108.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Grouch use?
111 parts, built around the ATMEGA32U4-AU, ATMEGA32U4-MU and PRTR5V0U2X. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Grouch KiCad files?
From the masonzack/Terminal repository on GitHub, at the commit this page was made from: the board is Grouch PCB/Grouch.kicad_pcb and its schematic Grouch PCB/Grouch.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Grouch design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).