

- Size
- 285 × 95.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 158
- Nets
- 110
- Pads
- 746
- Tracks, vias
- 1,337, 149
- Pours
- 10
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 24 Apr 2019
- Updated
- 2 Oct 2026
Overview
J67G is an open-source printed circuit board by Salicylic-acid3, from the Salicylic-acid3/PCB_Data repository on GitHub, published under the MIT licence. It is a 2-layer board of 285 × 95.1 mm with 158 parts on 110 nets, routed with 1,337 tracks and 149 vias.
It is built around the ATMEGA32U4-MU, PRTR5V0U2X and SMF6.0CA. Its parts include 68 diodes, 7 capacitors, 6 resistors, 2 ICs and 2 switches. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
3ATMEGA32U4-MU
VQFN-44-EP(7x7)-40℃~+85℃ 10bit 16MHz 1KB 2.5KB 2.7V~5.5V 26 32KB 8 Bit AVR Built-in FLASH VQFN-44-EP(7x7) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)PRTR5V0U2X
SOT-143-55℃~+125℃ 0.3pF、0.8pF 100W 10V、15V 5V 6.5V 6A 80nA ESD IEC 61000-4-2、IEC 61000-4-5、IEC 61000-4-4 Three channels Unidirectional SOT-143 ESD and Surge Protection (TVS/ESD) ROHSTECH PUBLICESD And Surge Protection (TVS/ESD)SMF6.0CA
SOD-123FL-55℃~+150℃ 10.3V 19.4A 200W 400uA 6.67V 6V Bidirectional IEC 61000-4-2 TVS SOD-123FL ESD and Surge Protection (TVS/ESD) ROHSLiownESD And Surge Protection (TVS/ESD)
Parts
158| Qty | Value | Footprint | References |
|---|---|---|---|
| 67 | SOD-123 | Diode_SMD:D_SOD-123 | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +51 |
| 53 | MX-NoLED | kbd_SW:CherryMX_Hotswap_1u | K_-1, K_,1, K_;1, K_.1, K_'1, K_/1, K_#0_1, K_#2, K_#3, K_#4, K_#5, K_#6, K_#7, K_#8, K_#9, K_=1 +37 |
| 4 | MX-NoLED | kbd_SW:CherryMX_Hotswap_1.25u | K_KANA1, K_LALT1, K_LCTRL1, K_LGUI1 |
| 3 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C1, C2, C3 |
| 3 | MX-NoLED | kbd_SW:CherryMX_Hotswap_1.5u | K_HEN1, K_MHEN1, K_TAB1 |
| 2 | 22 | Resistor_SMD:R_0603_1608Metric | R1, R3 |
| 2 | 22pF | Capacitor_SMD:C_0603_1608Metric | C5, C6 |
| 2 | 5.1k | Resistor_SMD:R_0603_1608Metric | R2, R6 |
| 2 | MX-NoLED | kbd_SW:CherryMX_Hotswap_1u_Small2 | K_ESC1, K_Q1 |
| 1 | 10k | Resistor_SMD:R_0603_1608Metric | R5 |
| 1 | 10uF | Capacitor_SMD:C_0603_1608Metric | C4 |
| 1 | 16MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | 1k | Resistor_SMD:R_0603_1608Metric | R4 |
| 1 | 1uF | Capacitor_SMD:C_0603_1608Metric | C7 |
| 1 | 60R@100MHz | Inductor_SMD:L_1206_3216Metric | L1 |
| 1 | 60_Outline | locallib:60_Outline-Modded-Extreme | REFe |
| 1 | ATmega32U4-MU | Package_DFN_QFN:QFN-44-1EP_7x7mm_P0.5mm_EP5.2x5.2mm | U1 |
| 1 | HRO-TYPE-C-31-M-12 | Type-C.pretty-master:HRO-TYPE-C-31-M-12-Assembly | USB1 |
| 1 | KEY_SWITCH | kbd_SW:CherryMX_Hotswap_2.75u_Rev | SW2 |
| 1 | LOGO | kbd_Logo:new_onsen_5 | G*** |
| 1 | MX-LED | kbd_SW:CherryMX_Hotswap_1.75u | K_CAPS1 |
| 1 | MX-NoLED | kbd_SW:CherryMX_Hotswap_3u_Rev | K_SPC1 |
| 1 | MX-NoLED | kbd_SW:CherryMX_Hotswap_ISO | K_ENTER1 |
| 1 | MX-NoLED | kbd_SW:CherryMX_Hotswap_2u | K_LSFT1 |
| 1 | MX-NoLED | kbd_SW:CherryMX_Hotswap_1u_Small8 | K_#1 |
| 1 | PRTR5V0U2X | random-keyboard-parts.pretty-master:SOT143B | U2 |
| 1 | Polyfuse_Small | Fuse:Fuse_1206_3216Metric | F1 |
| 1 | SMF6.0CA | Diode_SMD:D_SOD-123 | D32 |
| 1 | SW_Push | Button_Switch_SMD:SW_SPST_TL3342 | SW1 |
More from Salicylic-acid3/PCB_Data
12- 2 layers256 × 87 mm

- 2 layers191 × 118.7 mm

- 2 layers100 × 124 mm

- 2 layers169.5 × 93.3 mm

- 2 layers127 × 72 mm

- 2 layers138.6 × 118.8 mm

- 2 layers165 × 53 mm

- 2 layers131.4 × 93.3 mm

- 2 layers171.5 × 95.3 mm

- 2 layers107.4 × 129.3 mm

- 2 layers88.5 × 133.5 mm

- 2 layers88.5 × 133.5 mm

Similar boards
- 2 layers285 × 95.1 mm

KiCad KMKB JP Poker
kuzumotch/KiCad_HHKB-JP_Poker
Kicad Project Files, which is for HHKB-JP PCB for Poker Standard
156 parts1MIT - 2 layers303.2 × 94.5 mm

- 2 layers285.8 × 95.3 mm

- 2 layers139.5 × 130.8 mm

- 4 layers89 × 85 mm

- 2 layers344 × 124.5 mm

- 2 layers285 × 95.1 mm

- 2 layers284.3 × 116.2 mm

Questions
How big is the J67G PCB?
It measures 285 × 95.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the J67G use?
158 parts, built around the ATMEGA32U4-MU, PRTR5V0U2X and SMF6.0CA. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the J67G KiCad files?
From the Salicylic-acid3/PCB_Data repository on GitHub, at the commit this page was made from: the board is J67G/J67G.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the J67G design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).