

Didaktik
a 40s keyboard inspired by the Didaktik computer & keyboard
- Size
- 209.6 × 76.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 129
- Nets
- 82
- Pads
- 531
- Tracks, vias
- 794, 57
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 15 Oct 2022
- Updated
- 9 Mar 2025
Overview
Didaktik is an open-source printed circuit board by calvin-mcd, from the calvin-mcd/Didaktik-40 repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 209.6 × 76.2 mm with 129 parts on 82 nets, routed with 794 tracks and 57 vias.
It is built around the ATMEGA32U4-MU and PRTR5V0U2X. Its parts include 58 switches, 43 diodes, 8 capacitors, 8 resistors and 3 connectors. It belongs with the keyboards and input boards and the AVR (ATmega, ATtiny) boards of this library.
Main components
2ATMEGA32U4-MU
VQFN-44-EP(7x7)-40℃~+85℃ 10bit 16MHz 1KB 2.5KB 2.7V~5.5V 26 32KB 8 Bit AVR Built-in FLASH VQFN-44-EP(7x7) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)PRTR5V0U2X
SOT-143-55℃~+125℃ 0.3pF、0.8pF 100W 10V、15V 5V 6.5V 6A 80nA ESD IEC 61000-4-2、IEC 61000-4-5、IEC 61000-4-4 Three channels Unidirectional SOT-143 ESD and Surge Protection (TVS/ESD) ROHSTECH PUBLICESD And Surge Protection (TVS/ESD)
README
README.mdDidaktik 40
The Didaktik 40 is a retro-style keyboard taking its inspiration form the czech homecomputer, the didaktik gama. While offering its original layout, it also supports more modern split and single spacebar bottomrow configurations as well as two rotary encoders. The case is designed by gizzle13. It is a 2 degree, 2 piece case with top mounting for either simple or burger topmounting. It uses an old-school unified daughterboard for the usb port. The case and pcb furthermore support 2 leds, just like on the original case, and another hole to access the reset button.

Layout

Firmware
The basic firmware is set up to use the leds as layer indicators. Top for layer 1, bottom for layer 2, both for layer 3. There is hardware support for a speaker and for rgb strip but this is not enabled by default due to firmware size. Also note that the audio and rgb haven't been fully tested yet.
Case
The case is designed by gizzle13. Case files can be found in the respective folder. It is designed to use m2 heatinserts.
If you are in the EU consider asking gizzle to print the case for you to support them!

Disclaimer
This PCB has been fully tested and confirmed to work. The members of the PCB development team are however not liable if you end up with a non-functional pcb. Order at your own risk. Support will not be provided but pull requests will be reviewed and possibly accepted.
License
This project is released under the GPL v3 License. Please refer to the LICENCE file.
Credits
big thanks to gizzle13 for making this project possible. The whole idea really lives and thrives with the case!
As always big thanks also to the many people who inspired and helped with this board!
Any questions, contact Calvin0563 on Discord.
Parts
129| Qty | Value | Footprint | References |
|---|---|---|---|
| 46 | SW_Push_45deg | MX_Only:MXOnly-1U-NoLED | SW1, SW2, SW10, SW11, SW12, SW13, SW14, SW15, SW16, SW17, SW18, SW19, SW20, SW21, SW22, SW23 +30 |
| 40 | D_Small | Diode_SMD:D_SOD-123F | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +24 |
| 4 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C1, C2, C5, C7 |
| 4 | SW_Push_45deg | MX_Only:MXOnly-1.5U-NoLED | SW31, SW35a1, SW36a1, SW40 |
| 2 | 10k | Resistor_SMD:R_0402_1005Metric | R3, R4 |
| 2 | 22 | Resistor_SMD:R_0402_1005Metric | R1, R2 |
| 2 | 220 ohm | Resistor_SMD:R_0402_1005Metric | R8, R9 |
| 2 | 22pF | Capacitor_SMD:C_0402_1005Metric | C3, C4 |
| 2 | LED | Keebio-Parts:LED_3mm | D42, D43 |
| 2 | LOGO | LOGO | G***, G*** |
| 2 | RotaryEncoder_Switch | Keebio-Parts:RotaryEncoder_EC11-no-legs | SW41, SW42 |
| 2 | SW_Push_45deg | MX_Only:MXOnly-2U-ReversedStabilizers-NoLED | SW35b1, SW36b1 |
| 2 | SW_Push_45deg | MX_Only:MXOnly-3U-ReversedStabilizers-NoLED | SW34b1, SW37b1 |
| 1 | 10uF | Capacitor_SMD:C_0402_1005Metric | C8 |
| 1 | 1k | Resistor_SMD:R_0402_1005Metric | R6 |
| 1 | 1k | Keebio-Parts:Diode-Hybrid-Back | R5 |
| 1 | 1uF | Capacitor_SMD:C_0402_1005Metric | C6 |
| 1 | 2N2222 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | 500mA | Fuse:Fuse_1206_3216Metric | F1 |
| 1 | ATmega32U4-M | Package_DFN_QFN:QFN-44-1EP_7x7mm_P0.5mm_EP5.2x5.2mm | U1 |
| 1 | AVR-ISP-6 | random-keyboard-parts:Reset_Pretty-Mask | J2 |
| 1 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J3 |
| 1 | Conn_01x04_MountingPin | random-keyboard-parts:JST-SR-4 | J1 |
| 1 | Crystal_GND24_Small | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | PRTR5V0U2X | Package_TO_SOT_SMD:SOT-143 | D25 |
| 1 | SW_Push | random-keyboard-parts:SKQG-1155865 | SW_Reset1 |
| 1 | SW_Push | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | SW_Reset2 |
| 1 | SW_Push_45deg | MX_Only:MXOnly-7U-ReversedStabilizers-NoLED | SW36c1 |
| 1 | SW_Push_45deg | MX_Only:MXOnly-6U-Centered-ReversedStabilizers-NoLED | SW35c1 |
| 1 | Speaker | Keebio-Parts:AST1109MLTRQ | LS1 |
Similar boards
- 2 layers344 × 124.5 mm

- 2 layers285 × 95.1 mm

- 2 layers285 × 95.1 mm

- 2 layers284.3 × 116.2 mm

- 2 layers285.7 × 95.5 mm

Jones
jpskenn/Jones
Row-staggered 60% keyboard with gapless R2-R3 row. GH60 case compatible.
249 parts12MIT - 2 layers285 × 95.1 mm

Nora
jpskenn/Nora
Narrow pitch keyboard with Choc switches and keycaps. GH60 compatible.
303 parts12MIT - 2 layers228.4 × 85 mm

LeChiffre
paindrivendev/le-yiffre
Le Yiffre is a modified hotswap Le Chiffre pcb as an experimental design with different thumb clusters.Thanks to tominabox1 for creating Le Chiffre Keyboard and making it open source.
108 parts8 - 2 layers302.4 × 230.7 mm

Questions
How big is the Didaktik PCB?
It measures 209.6 × 76.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Didaktik use?
129 parts, built around the ATMEGA32U4-MU and PRTR5V0U2X. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Didaktik KiCad files?
From the calvin-mcd/Didaktik-40 repository on GitHub, at the commit this page was made from: the board is Project/Didaktik.kicad_pcb and its schematic Project/Didaktik.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Didaktik design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).