2 layers89.5 × 61.6 mm
FreeDeck TH 2020-02
FreeYourStream/freedeck-hardware
all the stuff you need to build your own FreeDeck
20 parts772
2 layers87.8 × 59.8 mm
FreeDeck SMD 2020-02
FreeYourStream/freedeck-hardware772all the stuff you need to build your own FreeDeck
- Size
- 87.8 × 59.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 37
- Nets
- 37
- Pads
- 194
- Tracks, vias
- 416, 74
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 3 Apr 2020
- Updated
- 30 May 2022
Overview
FreeDeck SMD 2020-02 is an open-source printed circuit board by FreeYourStream, from the FreeYourStream/freedeck-hardware repository on GitHub. It is a 2-layer board of 87.8 × 59.8 mm with 37 parts on 37 nets, routed with 416 tracks and 74 vias.
It is built around the ATMEGA32U4-MU, 74AHC125D and TS-1088R-02026, with the 74HC4051D,653-JSM and ME6211C33M5G-N among its other parts. Its parts include 6 capacitors, 4 resistors, 1 IC, 1 diode and 1 crystal. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
5
ATMEGA32U4-MU
VQFN-44-EP(7x7)-40℃~+85℃ 10bit 16MHz 1KB 2.5KB 2.7V~5.5V 26 32KB 8 Bit AVR Built-in FLASH VQFN-44-EP(7x7) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
74AHC125D
SO-14-40℃~+125℃ 1 2V~5.5V 4 4.3ns@5V,50pF 40uA 74AHC 8mA 8mA Schmitt trigger Tri-State Unidirectional SO-14 Buffers, Drivers, Receivers, Transceivers ROHSNexperiaBuffer/Driver/Transceiver
TS-1088R-02026
SMD,4x3mm100,000 cycles 12V 2.6N 2.93mm 2mm 3.9mm 50mA Black Round Button SMD(SMT) Tab SPST Surface Mount,Vertical Without Bracket SMD,4x3mm Tactile Switches ROHSXUNPUTactile Switches
74HC4051D,653-JSM
SOIC-16-40℃~+125℃ 104ns 15ns 180MHz 270Ω@4.5V 3V~9V 8 87ns 8:1 SOIC-16 Analog Switches, Multiplexers ROHSJSMSEMIAnalog Switches, Multiplexers
ME6211C33M5G-N
SOT-23-5-40℃~+150℃ 1 120mV@(100mA) 3.3V 500mA 50uVrms 60uA 6V 70dB@(1kHz) Fixed Over Current Protection、Enable、Short Circuit Protection Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMICRONEVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
README
README.mdFreeDeck
Be careful when printing cases. PCB rev 1.1 - 1.3 has new dimensions. Most cases on thingiverse are still for rev 1.0!
The first cases for Rev 1.1 / 1.2 / 1.3 can be found in the wiki (See link below)
This Repo contains all the stuff you need to build your own FreeDeck
- Walkthrough and tutorial video from Adam Welch
- Demo Video of my first prototype
Discord Community
Description
The FreeDeck aims to be a Free/OpenSource replacement for Elgatos Streamdeck and similar. It works by creating a config file with the FreeDeck Configurator, loading it onto an SDCard and inserting it into the FreeDeck. You don't need to install any software and can use it across reboots on Windows, Linux and MacOS. This was my main reason behind this gadget. This prototype is made from:
- Perfboard
- Arduino Pro Micro (32u4 16mhz 5v)
- 2x 4051 Multiplexer
- 6x ssd1306 OLEDs
- 6x 3x4x2mm SMD buttons
- SPI-SDcard Reader
The Arduino Code can be found here
The Configurator Repo can be found here
A wiki on how to construct it can be found here
Parts
37| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | TS-1088R-02026 | easyeda:SW-SMD_L3.9-W3.0-P4.45 | RESET, SW1, SW2, SW3, SW4, SW5, SW6 |
| 6 | SDA | easyeda:SSD1306_ARDUINO | OLED1, OLED2, OLED3, OLED4, OLED5, OLED6 |
| 4 | AutoGenerated:MountingHole_3.05mm | , , , | |
| 3 | 1u | easyeda:C0805 | C2, C5, C6 |
| 2 | 22R | easyeda:R0805 | R1, R2 |
| 2 | 22p | easyeda:C0805 | C3, C4 |
| 2 | 74HC4051D,653 | easyeda:SOIC-16_L9.9-W3.9-P1.27-LS6.0-BL | 74HC4051D-A, 74HC4051D-B |
| 1 | 100n | easyeda:C0805 | C1 |
| 1 | 10k | easyeda:R0805 | R3 |
| 1 | 16MHz | easyeda:OSC-SMD_4P-L3.2-W2.5-BL | X1 |
| 1 | 470R | easyeda:R0805 | R4 |
| 1 | 473521001 | easyeda:SD-SMD_SD-47352-101 | CARD1 |
| 1 | 6 | easyeda:HEADER_PRG_2X03 | ISP |
| 1 | 74AHC125D | easyeda:SOIC-14_L8.7-W3.9-P1.27-LS6.0-BL | 74AHC125D |
| 1 | ATMEGA32U4-MU | easyeda:VQFN-44_L7.0-W7.0-P0.50-BL-EP5.2 | U1 |
| 1 | BLUE | easyeda:LED0805-RD | LED1 |
| 1 | ME6211C33M5G-N | easyeda:SOT-23-5_L3.0-W1.7-P0.95-LS2.8-BL | LDO1 |
| 1 | micro 5P_C77238 | easyeda:MICRO-USB_MICRO-USB-17 | USB1 |
More from FreeYourStream/freedeck-hardware
1Similar boards
- 2 layers
Schemat ideowy
Javis79/Chess-learning-system
System nauki gry w szachy jest dedykowany dla początkujących szachistów, którzy chcą poprawić swoje umiejętności i poznać zasady gry.
224 parts - 4 layers99.9 × 100 mm
- 2 layers35 × 100 mm
WalkieTalkie
GuzziFlipFlops/ESP32-Walkie-Talkie
An open source ESPNOW based walkie talkie with a 600 meter tested distance, with an OLED and multiple buttons to interact with
66 parts7MIT - 2 layers65 × 30 mm
GlimmrBoard V3
d8ahazard/glimmr
Glimmr is a .Net Core application to synchronize Ambient LED strips with Hue Lights, Lifx Bulbs, and Nanoleaf Panels
13 parts60GPL-3.0 - 4 layers152.4 × 64.8 mm
Breakout
adrienkohlbecker/BB816
A homebrew 16 bit breadboard computer based on WDC's 65C816 processor
83 parts52 - 4 layers68.6 × 53.3 mm
- 4 layers56.5 × 61.7 mm
- 2 layers65 × 30 mm
Questions
How big is the FreeDeck SMD 2020-02 PCB?
It measures 87.8 × 59.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the FreeDeck SMD 2020-02 use?
37 parts, built around the ATMEGA32U4-MU, 74AHC125D, TS-1088R-02026 and 74HC4051D,653-JSM. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the FreeDeck SMD 2020-02 KiCad files?
From the FreeYourStream/freedeck-hardware repository on GitHub, at the commit this page was made from: the board is 3x2/SurfaceMount/FreeDeck_SMD_2020-02.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the FreeDeck SMD 2020-02 design in my own project?
Its repository states no licence, so its author keeps all rights: ask FreeYourStream before reusing the design.