
Usbasploader
mekatronik-achmadi/atmega-dev
This repository store some examples of ATMega development. Currently reworked

This repository store some examples of ATMega development. Currently reworked
Usbasp is an open-source printed circuit board by mekatronik-achmadi, from the mekatronik-achmadi/atmega-dev repository on GitHub. It is a 2-layer board of 29.6 × 33.6 mm with 20 parts on 32 nets, routed with 145 tracks and 9 vias.
It is built around the ATMEGA8A-AU. Its parts include 6 resistors, 4 diodes, 3 capacitors, 2 connectors and 1 IC. It belongs with the AVR (ATmega, ATtiny) boards of this library.
This repository store some examples of ATMega development. Currently reworked
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | Jumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1, JP2, JP3 |
| 2 | 10K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R4 |
| 2 | 1K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R3 |
| 2 | 22pF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C3 |
| 2 | 3v6 | Diode_SMD:D_SOD-323 | D3, D4 |
| 2 | 68 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5, R6 |
| 2 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1, D2 |
| 1 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1 |
| 1 | 12MHz | Crystal:Crystal_SMD_HC49-SD | Y1 |
| 1 | ATmega8A-A | Package_QFP:TQFP-32_7x7mm_P0.8mm | U1 |
| 1 | Conn_01x06_Pin | Connector_PinHeader_2.00mm:PinHeader_1x06_P2.00mm_Vertical | J1 |
| 1 | USB_B_Mini | Connector_USB:USB_Mini-B_Wuerth_65100516121_Horizontal | J2 |

mekatronik-achmadi/atmega-dev
This repository store some examples of ATMega development. Currently reworked

elektra42/freifunk-open-mppt
Open hard- and software solar maximum power point tracker


baranovskiykonstantin/aquarium
Control the lighting and the heating of the aquarium.

a-sakharov/LptToUsbAdapter
Solution for connecting old LPT device to modern PC via USB


HDR/XenoGC-Flex
Flashing is done over isp, a raspberry pi can be used for this, see https://github.com/HDR/RaspberryPiISP


It measures 29.6 × 33.6 mm and has 2 copper layers, 1.6 mm thick.
20 parts, built around the ATMEGA8A-AU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the mekatronik-achmadi/atmega-dev repository on GitHub, at the commit this page was made from: the board is atmega-demos/avr_usbasp/circuit/kicad/usbasp/usbasp.kicad_pcb and its schematic atmega-demos/avr_usbasp/circuit/kicad/usbasp/usbasp.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask mekatronik-achmadi before reusing the design.