
HM CENTRAL-01
BenjamimKrug/robo_humanoide
Repositorio para arquivos gerais necessários para o desenvolvimento do Robô humanoide

Elec Ardan is an open-source printed circuit board by mehdif-git, from the mehdif-git/ardan-cansat repository on GitHub. It is a 2-layer board of 50 × 50 mm with 11 parts on 24 nets, routed with 68 tracks and 0 vias.
It is built around the ESP32-CAM, BMP280 and BC337. Its parts include 2 switches and 1 transistor. It belongs with the ESP32 and RISC-V boards of this library.
Code and schematics of the cansat aboard SCALAR-VI made with students of the Jules Verne middleschool in Carcassone, FR.
The ‘RadioHead’ library used to manage the LoRaWAN depends on “stdatomic”, we need to change the source code of ‘RadioHead’ to source the correct implementation for Arduino vs. ESP.
This work is common to the Supaero Space Section's Scalar project. Any project member is allowed to contribute.
Electronics has been made with the help of F. Topeza and C. Mopin-Rauschkolb. CAD has been done entierly by D. Bessede
| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 100k | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | Pull-Down1 |
| 1 | 1N4007 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | Diode1 |
| 1 | BC337 | Package_TO_SOT_THT:TO-92_Inline | Q1 |
| 1 | BMP280 | Footprints:BMP280 | BMP280 |
| 1 | Buzzer | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | BZ1 |
| 1 | ESP32-CAM | Footprints:ESP32-CAM | ESP32-CAM1 |
| 1 | LiPo (3.7V, 550mAh) | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | Battery1 |
| 1 | SW_DIP_x02 | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | SW1 |
| 1 | UART,868MHz | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | RF96LoRa1 |
| 1 | ~ | Footprints:XL6009 | XL6009 |
| 1 | ~ | Footprints:S7V8A1 | S7V8A1 |

BenjamimKrug/robo_humanoide
Repositorio para arquivos gerais necessários para o desenvolvimento do Robô humanoide

vaugerbird/sstv-backpack
A ESP32-CAM SSTV backpack for the Baofeng UV-5R + others!

Circuit-Digest/ESP32-Cam-Surveillance-Car
Watch full video on ESP32 surveillance car

InnoGreenTech/ESP32-CAM-pir-static-relay
ESP32-CAM mounting on a board with pir, photo-resistor sensors, AC/DC power and a static relay.


airsoftak25/Night-Gogle
My small project about creating a Night vision gogle witch cost less than 2000CZK each


dipenac/camara-esp32-espidf
- [x] Y dentro del folder de projects utilizamos una de las funciones que presta idf.py, con la cual creamos un projecto con el nombre que deseemos.
It measures 50 × 50 mm and has 2 copper layers, 1.5 mm thick.
11 parts, built around the ESP32-CAM, BMP280 and BC337. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the mehdif-git/ardan-cansat repository on GitHub, at the commit this page was made from: the board is Elec_Ardan/Elec_Ardan.kicad_pcb and its schematic Elec_Ardan/Elec_Ardan.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask mehdif-git before reusing the design.