2 layers99.6 × 49.8 mm
2 layers70 × 99 mm
Campfire console
MeghanaM4/campfire-console1PCB Badges with TFT display, NFC module, lipo battery charging, and 6 programmable buttons
- Size
- 70 × 99 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 71
- Nets
- 80
- Pads
- 307
- Tracks, vias
- 603, 403
- Pours
- 8
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 13 Jan 2026
- Updated
- 13 Feb 2026
Overview
Campfire console is an open-source printed circuit board by MeghanaM4, from the MeghanaM4/campfire-console repository on GitHub, published under the MIT licence. It is a 2-layer board of 70 × 99 mm with 71 parts on 80 nets, routed with 603 tracks and 403 vias.
It is built around the RP2350A, W25Q128JVSIQ and AMS1117-3.3, with the BQ24072RGTR, NT3H2111W0FHKH and K2-1103SP-K4SW-04 among its other parts. Its parts include 24 capacitors, 20 resistors, 9 switches, 5 ICs and 5 diodes. It belongs with the power and lEDs and displays boards and the RP2350 boards of this library.
Main components
11
RP2350A
QFN-60-EP(7x7)Power-on reset (POR)、Undervoltage detection (BOR/LVD/LVR/LVI)、Watchdog reset、Integrated LDO、True random number generator (TRNG)、Hardware ECC check QFN-60-EP(7x7) Microcontrollers (MCU/MPU/SOC) ROHSRaspberry PiMicrocontrollers (MCU/MPU/SOC)
W25Q128JVSIQ
SOIC-8-208mil-40℃~+85℃ 100,000 cycles 120ms@(32KB) 128Mbit 133MHz 1uA 2.7V~3.6V 20 Years 3ms Power-on reset、Hardware write protection、Software write protection、Write enable latch、Absolute write protection SPI SOIC-8-208mil NOR FLASH ROHSWinbondNOR FLASH
AMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
BQ24072RGTR
QFN-16-EP(3x3)-40℃~+125℃ 1 1.5A 1.5mA 4.2V 4.35V~6.6V Charging IC Lithium Battery Support QFN-16-EP(3x3) Battery Management ROHSTexas InstrumentsBattery Management
NT3H2111W0FHKH
XQFN-8(1.6x1.6)RFID ICsNXP Semiconductors
K2-1103SP-K4SW-04
SMD-4P,12x12mmSMD Tactile Switches ROHSHRO ElectronicsTactile Switches
KMR221GLFS
SMD,4.6x2.8mm-40℃~+85℃ 1.9mm 2.8mm 2N 32V 4.6mm 50mA Gull Wing Round Button SPST Surface Mount,Vertical SMD,4.6x2.8mm Tactile Switches ROHSC&KTactile Switches
ABM8-272-T3
SMD3225-4P-40℃~+85℃ 10pF 12MHz 50Ω SMD crystal oscillator ±30ppm ±30ppm SMD3225-4P Crystals ROHSAbraconCrystals
AOTA-B201610S3R3-101-T
0806115mΩ 2.1A 2.4A 3.3uH Molded inductor 0806 Molding Power Inductors ROHSAbraconPower InductorsFFC3B11-20-T
SMD,P=1mm,卧贴-25℃~+85℃ 0.3mm 1mm 2.5mm 20P Phosphor bronze Slide Lock Surface Mount, Right Angle Tin Top Contact SMD,P=1mm,卧贴 FFC, FPC (Flat Flexible) Connector Assemblies ROHSGlobal Connector Technology (GCT)FFC, FPC (Flat Flexible) Connector Assemblies
SS12D07VG4
插件-5P,8.7x4.4mm4.4mm 8.7mm 8.7mm Black PC Pin Rectangular Columnar SPDT Through Hole 插件-5P,8.7x4.4mm Slide Switches ROHSHanElectricitySlide Switches
README
README.mdcampfire-console
PCB Badges with TFT display, NFC module, lipo battery charging, and 6 programmable buttons
Parts
71| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 100n | Capacitor_SMD:C_0402_1005Metric | C6, C8, C9, C10, C11, C12, C13, C14, C15, C16, C17, C18 |
| 7 | 1k | Resistor_SMD:R_0402_1005Metric | R6, R8, R9, R10, R11, R16, R18 |
| 6 | 4.7u | Capacitor_SMD:C_0402_1005Metric | C1, C2, C3, C7, C26, C27 |
| 6 | K2-1103SP-K4SW-04 | K2-1103SP-K4SW-04:K2-1103SP-K4SW-04 | S1, S3, S4, S5, S6, S7 |
| 4 | 10k | Resistor_SMD:R_0402_1005Metric | R7, R19, R21, R23 |
| 4 | LED | LED_SMD:LED_0603_1608Metric | D2, D3, D5, D6 |
| 2 | 10u | Capacitor_SMD:C_0402_1005Metric | C4, C5 |
| 2 | 15p | Capacitor_SMD:C_0402_1005Metric | C19, C20 |
| 2 | 2.4k | Resistor_SMD:R_0402_1005Metric | R24, R25 |
| 2 | 27 | Resistor_SMD:R_0402_1005Metric | R4, R5 |
| 2 | 5.1k | Resistor_SMD:R_0402_1005Metric | R2, R3 |
| 2 | KMR221GLFS | footprints:SW_KMR221GLFS | S8, S9 |
| 1 | 1u | Capacitor_SMD:C_0402_1005Metric | C25 |
| 1 | 2 | Resistor_SMD:R_0402_1005Metric | R12 |
| 1 | 220n | Capacitor_SMD:C_0402_1005Metric | C24 |
| 1 | 33 | Resistor_SMD:R_0402_1005Metric | R1 |
| 1 | 47 | Resistor_SMD:R_0402_1005Metric | R22 |
| 1 | ABM8-272-T3 | footprints:XTAL_ABM8-272-T3 | Y1 |
| 1 | AMS1117-3.3 | footprints:SOT229P700X180-4N | U4 |
| 1 | AOTA-B201610S3R3-101-T | footprints:AOTAB201610S3R3101T | L1 |
| 1 | BQ24072RGTR | footprints:IC_BQ24072RGTR | U5 |
| 1 | D | Diode_SMD:D_SOD-123F | D1 |
| 1 | FFC3B11-20-T | footprints:CON_522712069_MOL | J1 |
| 1 | LOGO | LOGO | G*** |
| 1 | NPN | Package_TO_SOT_SMD:SOT-23-3 | Q1 |
| 1 | NT3H2111W0FHKH | footprints:QFN8P50_160X160X50L40X20N | U2 |
| 1 | RP2350A | Package_DFN_QFN:QFN-60-1EP_7x7mm_P0.4mm_EP3.4x3.4mm_ThermalVias | U1 |
| 1 | SM02B-SURS-TF_LF__SN_ | Connector_JST:JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | J3 |
| 1 | SS12D07VG4 | footprints:SW_SS12D07VG4 | S2 |
| 1 | USB_C_Receptacle_USB2.0_14P | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J2 |
| 1 | W25Q128JVS | Package_SO:SOIC-8_5.3x5.3mm_P1.27mm | U3 |
| 1 | antenna | antenna:antenna | G*** |
Questions
How big is the Campfire console PCB?
It measures 70 × 99 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Campfire console use?
71 parts, built around the RP2350A, W25Q128JVSIQ, AMS1117-3.3 and BQ24072RGTR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Campfire console KiCad files?
From the MeghanaM4/campfire-console repository on GitHub, at the commit this page was made from: the board is KiCAD/campfire-console/campfire-console.kicad_pcb and its schematic KiCAD/campfire-console/campfire-console.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Campfire console design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 4 layers44.3 × 95.9 mm
- 4 layers34 × 87.3 mm
- 2 layers34.2 × 63.7 mm
Gb link usb
hazy2go/gb-link-usb
Game Boy (DMG) link port to USB-C PC adapter: printer emulation, PC link, online link play. Sister project of the WiFi Game Boy cart.
59 parts2 - 4 layers240 × 90.5 mm
BILLEE Rover Control Module V1
BILLEE-BroncoSTAR/billee-hardware-2027
Hardware and firmware Repository for BILLEE URC 2027
276 parts1MIT - 4 layers82 × 55 mm
Spark
ratmuds/spark
The PCB files for this project. The gerber and other PCBA files are in the production folder.
202 parts1 - 2 layers77.5 × 48.5 mm
- 2 layers40 × 89.5 mm
Mono
jmcpheron/pico-quorum
Several people, several keys, one Safe. Hardware approvals for Safe multisig wallets.
89 partsMIT