2 layers60 × 126.6 mm
V3 Connector + IRLED
PiTracLM/PiTrac
Launch monitor using low-cost raspberry pi and camera hardware to determine ball launch speed, angles and spin. See https://discord.gg/vGuyAAxXJH (permalink)
151 parts439GPL-2.0
2 layers27.4 × 12 mm
UsbOled
medo64/UsbOledUSB OLED allows a USB CDC serial connection to SSD1306 OLED Display Modules.
- Size
- 27.4 × 12 mm
- Copper layers
- 2
- Thickness
- 0.85 mm
- Parts
- 15
- Nets
- 13
- Pads
- 63
- Tracks, vias
- 128, 5
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 22 Nov 2020
- Updated
- 22 Aug 2024
Overview
UsbOled is an open-source printed circuit board by medo64, from the medo64/UsbOled repository on GitHub, published under the MIT licence. It is a 2-layer board of 27.4 × 12 mm with 15 parts on 13 nets, routed with 128 tracks and 5 vias.
It is built around the USB4085-GF-A. Its parts include 5 resistors, 3 capacitors, 1 IC, 1 connector and 1 inductor. It belongs with the lEDs and displays and interfaces and adapters boards of this library.
Main components
1README
README.mdUSB OLED
USB OLED allows a USB CDC serial connection to SSD1306 OLED Display Modules.
Protocol
This driver will present itself to the system as CDC USB device. Communication protocol is text-based and available here.
You can check my blog and other projects at www.medo64.com.
Parts
15| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 5K1 | Medo64:R (0805) | R1, R2, R3 |
| 2 | 1u | Medo64:C (0805) | C2, C3 |
| 2 | 5K1 | Medo64:R Optional (0805) | R4, R5 |
| 1 | 100n | Medo64:C (0805) | C1 |
| 1 | 16F1454 | Medo64:U Micro [PIC16F1454] (TSSOP-14) | U1 |
| 1 | 40R | Medo64:L Ferrite (0805) | L1 |
| 1 | ACT | Medo64:DS (0805) | DS1 |
| 1 | I2C OLED 128x32 | Medo64:DS OLED 128x32 I2C (4w) | DS2 |
| 1 | Medo64 | Medo64:ICON Medo64 | ICON |
| 1 | Microchip PIC | Medo64:ICSP PIC Pogo (5w) | ICSP |
| 1 | USB4085 | Medo64:J USB C 2.0 Receptacle (16w) | J1 |
Similar boards
- 2 layers100 × 63.7 mm
- 4 layers51 × 77 mm
- 4 layers50 × 80 mm
ARGOS DEMO
CNES/argos-demo-board
Demo board designed to use the ARRIBADA SMD module via USB to send ARGOS messages to the Kineis constellation.
91 parts7CERN-OHL-S-2.0 - 2 layers
RC KiCAD
dev-campusfab/FabRice
Documentation et code source de FabRice, le robot Autonome.
62 parts4MIT - 2 layers77.5 × 118.1 mm
Tenkey plusplus
jonbobcar/tenkey_plusplus
Tenkey++ is a QMK powered, OSHW, USB-C connected, hotswapable numpad.
79 parts4 - 2 layers97.5 × 79 mm
RGB LED Driver
PCB-Design-MIT/Wi-Fi-Controlled-RGB-Light
A demo board for students to learn to solder and debug
144 parts4 - 2 layers68.2 × 73.5 mm
Questions
How big is the UsbOled PCB?
It measures 27.4 × 12 mm and has 2 copper layers, 0.85 mm thick.
What parts does the UsbOled use?
15 parts, built around the USB4085-GF-A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the UsbOled KiCad files?
From the medo64/UsbOled repository on GitHub, at the commit this page was made from: the board is src/UsbOled.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the UsbOled design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).