Skip to the content
2 layers32 × 12 mmPd fix sw, the printed circuit board in 3D
Size
32 × 12 mm
Copper layers
2
Thickness
1.2 mm
Parts
13
Nets
17
Pads
49
Tracks, vias
48, 36
Pours
7
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
5 Jul 2023
Updated
27 Oct 2026

Overview

Pd fix sw is an open-source printed circuit board by McbeEringi, from the McbeEringi/pcb-stuff repository on GitHub, published under the MIT licence. It is a 2-layer board of 32 × 12 mm with 13 parts on 17 nets, routed with 48 tracks and 36 vias.

It is built around the CH221K. Its parts include 5 resistors, 2 connectors, 1 capacitor, 1 IC and 1 diode.

Main components

1

Parts

13
QtyValueFootprintReferences
25k1Resistor_SMD:R_0603_1608MetricR2, R3
110kResistor_SMD:R_0603_1608MetricR5
11kResistor_SMD:R_0603_1608MetricR1
11uCapacitor_SMD:C_0603_1608MetricC1
1CH221KPackage_TO_SOT_SMD:SOT-23-6U1
1Conn_01x02Connector_JST:JST_XH_S2B-XH-A_1x02_P2.50mm_HorizontalJ2
1MountingHoleMountingHole:MountingHole_3.2mm_M3_Pad_TopOnlyH1
1PGLED_SMD:LED_0603_1608MetricD1
1POWLibrary:IS-1245T-GSW1
1R_CFGResistor_SMD:R_0603_1608MetricR4
1USB_C_Receptacle_USB2.0_16PConnector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_HorizontalJ1
1mcbeeringi_iconLibrary:mcbeeringi_icon_5mm

More from McbeEringi/pcb-stuff

12

Similar boards

  • 4 layers86 × 34 mmBsl drv v1, the printed circuit board in 3D

    Bsl drv v1

    jackw01/scanlight

    A better light source for scanning color negative film

    157 parts397CERN-OHL-W-2.0
  • 2 layers94.8 × 67.2 mmArgo v9-stable rev4, the printed circuit board in 3D

    Argo v9-stable rev4

    SensorsINI/argo

    Code for Autonomous sail boat

    139 parts16
  • 6 layers180 × 120 mmDCJ11CoreBoard v1.3, the printed circuit board in 3D

    DCJ11CoreBoard v1.3

    CYP4502D6/DCJ11CoreBoard

    PDP-11 replica project based on the DEC DCJ-11 chipset, utilizing FPGA as bus controller and peripheral emulator, using external SRAM to provide system memory

    234 parts13GPL-3.0
  • 4 layers88.8 × 13 mmESP PD210, the printed circuit board in 3D

    ESP PD210

    CharlieYu4994/ESP-PD210_hardware

    68 parts2AGPL-3.0
  • 2 layers100 × 60 mmKINK box, the printed circuit board in 3D

    KINK box

    FunDeckHermit/KINK-box

    Audio amplifier / Web radio based on ESP32-S3

    112 parts2Apache-2.0
  • 4 layers122.3 × 96.1 mmCyclops, the printed circuit board in 3D

    Cyclops

    furbrain/Cyclops

    Photogrammetry with sensor fusion

    68 parts2
  • 2 layers91 × 55 mmMeisi, the printed circuit board in 3D

    Meisi

    midarubiccube/canfd_meisi

    この名刺はPCとつなぐだけでCANFDができるという最高で実用性マシマシの名刺となっています。 特徴として + SLCANでserialを経由しCANが可能 + CANFD2ch搭載 + CANFDをLANケーブルに変換 + 終端抵抗 + LANケーブルでPoE給電(12V)が可能。 + インジケータ付き

    47 parts2
  • 4 layers100 × 100 mmMainboard4, the printed circuit board in 3D

    Mainboard4

    midarubiccube/raspberrypi-io-board

    232 parts2MIT

Questions

How big is the Pd fix sw PCB?

It measures 32 × 12 mm and has 2 copper layers, 1.2 mm thick.

What parts does the Pd fix sw use?

13 parts, built around the CH221K. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Pd fix sw KiCad files?

From the McbeEringi/pcb-stuff repository on GitHub, at the commit this page was made from: the board is proj/usb/pd-fix-sw/pd-fix-sw.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Pd fix sw design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).