2 layers120 × 100 mm
4 layers88.8 × 13 mm
ESP PD210
CharlieYu4994/ESP-PD210_hardware2- Size
- 88.8 × 13 mm
- Copper layers
- 4
- Thickness
- 1.55 mm
- Parts
- 68
- Nets
- 56
- Pads
- 233
- Tracks, vias
- 370, 194
- Pours
- 10
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 9 Aug 2022
- Updated
- 13 Nov 2022
Overview
ESP PD210 is an open-source printed circuit board by CharlieYu4994, from the CharlieYu4994/ESP-PD210_hardware repository on GitHub, published under the AGPL-3.0 licence. It is a 4-layer board of 88.8 × 13 mm with 68 parts on 56 nets, routed with 370 tracks and 194 vias.
It is built around the OPA188AID, CH221K and ESP8684, with the SE30P09D among its other parts. Its parts include 25 capacitors, 23 resistors, 5 ICs, 4 inductors and 3 connectors.
Main components
4
OPA188AID
SOIC-8-18V~-2V、2V~18V -40℃~+125℃ 0.8V/us 1 146dB 160pA 16mA 25uV 2MHz 30nV/℃ 320pA 450uA 4V~36V 8.8nV/√Hz@1kHz EMI filtering/RF suppression、Zero drift / auto-zero、Built-in compensation、Reverse-phase input protection Rail-to-rail output SOIC-8 Precision Op Amps ROHSTexas InstrumentsPrecision Op Amps
CH221K
SOT-23-6-40℃~+105℃ 100W 5V、9V、12V、15V、20V PD 3.0 Power Receiver Controller SOT-23-6 USB PD ROHSWCH (Nanjing Qinheng Microelectronics)USB PDESP8684
QFN24_4x4QFN-24(4x4) New Arrivals ROHSEspressif SystemsUncategorised
SE30P09D
DFN-8(3x3)-55℃~+150℃ 1 P-Channel 2.6nF 295pF 2W 30V 30mΩ@4.5V 370pF 39nC@10V 3V 6A P-Channel ±20V DFN-8(3x3) MOSFETs ROHSSINO-ICMOSFETs
Parts
68| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C11, C12, C14, C15, C17, C24, C25 |
| 6 | 1uF | Capacitor_SMD:C_0402_1005Metric | C1, C2, C3, C4, C7, C19 |
| 4 | 4.7K | Resistor_SMD:R_0402_1005Metric | R1, R3, R4, R6 |
| 3 | 2.2uF | Capacitor_SMD:C_0402_1005Metric | C8, C13, C16 |
| 3 | 5.1K | Resistor_SMD:R_0402_1005Metric | R11, R20, R21 |
| 2 | 100K | Resistor_SMD:R_0402_1005Metric | R16, R17 |
| 2 | 10K | Resistor_SMD:R_0402_1005Metric | R5, R19 |
| 2 | 10nF | Capacitor_SMD:C_0402_1005Metric | C5, C6 |
| 2 | 1K | Resistor_SMD:R_0402_1005Metric | R15, R18 |
| 2 | 22uF | Capacitor_SMD:C_0402_1005Metric | C18, C20 |
| 2 | 2K | Resistor_SMD:R_0402_1005Metric | R22, R23 |
| 2 | 50K | Resistor_SMD:R_0402_1005Metric | R13, R14 |
| 2 | TBD | Capacitor_SMD:C_0402_1005Metric | C22, C23 |
| 2 | TBD | Inductor_SMD:L_0402_1005Metric | L2, L4 |
| 1 | 100R | Resistor_SMD:R_0402_1005Metric | R8 |
| 1 | 100nF | Capacitor_SMD:C_0402_1005Metric | C21 |
| 1 | 10uF | Capacitor_SMD:C_0402_1005Metric | C10 |
| 1 | 16K | Resistor_SMD:R_0402_1005Metric | R12 |
| 1 | 1N4148 | Diode_SMD:D_SOD-323 | D1 |
| 1 | 2nH | Inductor_SMD:L_0402_1005Metric | L1 |
| 1 | 390 | Resistor_SMD:R_0402_1005Metric | R9 |
| 1 | 390K | Resistor_SMD:R_0402_1005Metric | R10 |
| 1 | 3950 | Resistor_SMD:R_0603_1608Metric | TH1 |
| 1 | 4.7uF | Capacitor_SMD:C_0402_1005Metric | C9 |
| 1 | 4.7uH | Inductor_SMD:L_1008_2520Metric | L3 |
| 1 | 47K | Resistor_SMD:R_0402_1005Metric | R7 |
| 1 | 499R | Resistor_SMD:R_0402_1005Metric | R2 |
| 1 | Antenna_Chip | Library:C01 | AE1 |
| 1 | CART | Library:JBC210 | J2 |
| 1 | CH221K | Package_TO_SOT_SMD:SOT-23-6 | U5 |
| 1 | ESP8684 | Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.7x2.7mm | U2 |
| 1 | JW5017S | Package_TO_SOT_SMD:SOT-23-6 | U4 |
| 1 | Move | Library:X160 | SW2 |
| 1 | NPN | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | OPA188 | Package_TO_SOT_SMD:SOT-23-5 | U3 |
| 1 | Rocker | Library:7*7*6-6P_WX | SW1 |
| 1 | SE30P09D | Package_DFN_QFN:DFN-8-1EP_3x3mm_P0.5mm_EP1.66x2.38mm | Q2 |
| 1 | SG-211 | Oscillator:Oscillator_SMD_SeikoEpson_SG210-4Pin_2.5x2.0mm | X1 |
| 1 | SSD1316 | Library:Display_FPC | U1 |
| 1 | TTL | Library:TTL | J1 |
| 1 | USB_C_Receptacle_USB2.0 | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J3 |
Similar boards
- 4 layers23 × 13 mm
WIFI Module
NEOgHacking/DMXion_4Port_Node
A 4 port dmx node with rdm funtionallity. Connects via ARTNET or sACN
18 parts2GPL-3.0 - 4 layers86 × 34 mm
Bsl drv v1
jackw01/scanlight
A better light source for scanning color negative film
157 parts397CERN-OHL-W-2.0 - 2 layers94.8 × 67.2 mm
- 6 layers180 × 120 mm
DCJ11CoreBoard v1.3
CYP4502D6/DCJ11CoreBoard
PDP-11 replica project based on the DEC DCJ-11 chipset, utilizing FPGA as bus controller and peripheral emulator, using external SRAM to provide system memory
234 parts13GPL-3.0 - 2 layers100 × 60 mm
- 4 layers122.3 × 96.1 mm
- 2 layers91 × 55 mm
Meisi
midarubiccube/canfd_meisi
この名刺はPCとつなぐだけでCANFDができるという最高で実用性マシマシの名刺となっています。 特徴として + SLCANでserialを経由しCANが可能 + CANFD2ch搭載 + CANFDをLANケーブルに変換 + 終端抵抗 + LANケーブルでPoE給電（12V）が可能。 + インジケータ付き
47 parts2
Questions
How big is the ESP PD210 PCB?
It measures 88.8 × 13 mm and has 4 copper layers, 1.55 mm thick.
What parts does the ESP PD210 use?
68 parts, built around the OPA188AID, CH221K, ESP8684 and SE30P09D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ESP PD210 KiCad files?
From the CharlieYu4994/ESP-PD210_hardware repository on GitHub, at the commit this page was made from: the board is ESP_PD210.kicad_pcb and its schematic ESP_PD210.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the ESP PD210 design in my own project?
Its repository publishes it under the AGPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).