

この名刺はPCとつなぐだけでCANFDができるという最高で実用性マシマシの名刺となっています。 特徴として + SLCANでserialを経由しCANが可能 + CANFD2ch搭載 + CANFDをLANケーブルに変換 + 終端抵抗 + LANケーブルでPoE給電(12V)が可能。 + インジケータ付き
- Size
- 91 × 55 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 47
- Nets
- 89
- Pads
- 247
- Tracks, vias
- 323, 46
- Pours
- 5
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 5 Dec 2024
- Updated
- 13 Dec 2024
Overview
Meisi is an open-source printed circuit board by midarubiccube, from the midarubiccube/canfd_meisi repository on GitHub. It is a 2-layer board of 91 × 55 mm with 47 parts on 89 nets, routed with 323 tracks and 46 vias.
It is built around the AZ1117CH-3.3TRG1, CH221K and RJ45. Its parts include 13 resistors, 12 capacitors, 9 connectors, 5 ICs and 4 diodes. It belongs with the STM32 boards of this library.
Main components
3AZ1117CH-3.3TRG1
SOT-223-20℃~+125℃@(Tj) 0.003%Vout 1 1.2V@(800mA) 1.35A 10V 3.3V 4mA 70dB@(120Hz) Fixed Over Current Protection、Over Temperature Protection Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSDiodes IncorporatedVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsCH221K
SOT-23-6-40℃~+105℃ 100W 5V、9V、12V、15V、20V PD 3.0 Power Receiver Controller SOT-23-6 USB PD ROHSWCH (Nanjing Qinheng Microelectronics)USB PDRJ45
TH-12PTH-12P SMT ROHSJLCPCB AssemblyUncategorised
README
README.md基板概要
この名刺はPCとつなぐだけでCANFDができるという最高で実用性マシマシの名刺となっています。 特徴として
- SLCANでserialを経由しCANが可能
- CANFD2ch搭載
- CANFDをLANケーブルに変換
- 終端抵抗
- LANケーブルでPoE給電(12V)が可能。
- インジケータ付き
といった感じです。
実装の仕方
Parts
47| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | C | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3, C4, C5, C8, C9, C10, C11, C12 |
| 4 | 1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6, R7, R10, R11 |
| 4 | LED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1, D2, D3, D4 |
| 2 | 0.1μF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C7 |
| 2 | 120Ω | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5, R8 |
| 2 | 5.1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R9, R12 |
| 2 | 5.1kΩ | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2, R4 |
| 2 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J4, J6 |
| 2 | MCP2562-E-SN | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2, U4 |
| 2 | RJ45 | footprint:7810-8P8C | J1, J2 |
| 2 | Screw_Terminal_01x03 | TerminalBlock:TerminalBlock_Xinya_XY308-2.54-3P_1x03_P2.54mm_Horizontal | J5, J8 |
| 2 | USB_C_Receptacle_USB2.0 | Connector_USB:USB_C_Receptacle_HCTL_HC-TYPE-C-16P-01A | J3, J7 |
| 1 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R13 |
| 1 | 10µF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C6 |
| 1 | 1kΩ | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3 |
| 1 | 1μF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2 |
| 1 | 47kΩ | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1 |
| 1 | AZ1117CH-3.3TRG1 | footprint:SOT230P700X180-4N | IC1 |
| 1 | CH221K | Package_TO_SOT_SMD:SOT-23-6 | U1 |
| 1 | Conn_02x07_Odd_Even | footprint:connector | J9 |
| 1 | Crystal_GND2 | Crystal:Resonator_SMD_Murata_CSTxExxV-3Pin_3.0x1.1mm_HandSoldering | Y1 |
| 1 | LOGO | footprint:gitqr | G*** |
| 1 | LOGO | footprint:xqr | G*** |
| 1 | STM32G474 | Package_QFP:LQFP-64_10x10mm_P0.5mm | U3 |
| 1 | SW_Push | Button_Switch_THT:SW_PUSH_6mm_H5mm | SW1 |
Similar boards
- 2 layers88 × 100 mm

- 4 layers86 × 34 mm

Bsl drv v1
jackw01/scanlight
A better light source for scanning color negative film
157 parts397CERN-OHL-W-2.0 - 2 layers94.8 × 67.2 mm

- 6 layers180 × 120 mm

DCJ11CoreBoard v1.3
CYP4502D6/DCJ11CoreBoard
PDP-11 replica project based on the DEC DCJ-11 chipset, utilizing FPGA as bus controller and peripheral emulator, using external SRAM to provide system memory
234 parts13GPL-3.0 - 4 layers88.8 × 13 mm

- 2 layers100 × 60 mm

- 4 layers122.3 × 96.1 mm

- 4 layers100 × 100 mm

Questions
How big is the Meisi PCB?
It measures 91 × 55 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Meisi use?
47 parts, built around the AZ1117CH-3.3TRG1, CH221K and RJ45. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Meisi KiCad files?
From the midarubiccube/canfd_meisi repository on GitHub, at the commit this page was made from: the board is design/meisi.kicad_pcb and its schematic design/CANFD.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Meisi design in my own project?
Its repository states no licence, so its author keeps all rights: ask midarubiccube before reusing the design.