2 layers42 × 67 mm
2 layers65 × 52 mm
RP2040
MayuriDhekale/Project_9- Size
- 65 × 52 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 34
- Nets
- 52
- Pads
- 218
- Tracks, vias
- 899, 108
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 15 Oct 2026
- Updated
- 15 Oct 2026
Overview
RP2040 is an open-source printed circuit board by MayuriDhekale, from the MayuriDhekale/Project_9 repository on GitHub. It is a 2-layer board of 65 × 52 mm with 34 parts on 52 nets, routed with 899 tracks and 108 vias.
It is built around the RP2040 and W25Q128JVSIQ. Its parts include 17 capacitors, 5 resistors, 4 connectors, 3 ICs and 1 crystal. It belongs with the RP2040 boards of this library.
Main components
2
RP2040
LQFN-56(7x7)12bit 133MHz 30 LQFN-56(7x7) Microcontrollers (MCU/MPU/SOC) ROHSRaspberry PiMicrocontrollers (MCU/MPU/SOC)
W25Q128JVSIQ
SOIC-8-208mil-40℃~+85℃ 100,000 cycles 120ms@(32KB) 128Mbit 133MHz 1uA 2.7V~3.6V 20 Years 3ms Power-on reset、Hardware write protection、Software write protection、Write enable latch、Absolute write protection SPI SOIC-8-208mil NOR FLASH ROHSWinbondNOR FLASH
README
README.mdProject_9
A minimal RP2040 board designed in KiCad
I designed a small RP2040 board (like a Raspberry Pi Pico) in KiCad. I followed Raspberry Pi's official design guide to learn how a real board is made.
Parts
34| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 100nF | Capacitor_SMD:C_0603_1608Metric | C3, C4, C5, C6, C8, C9, C10, C11, C12 |
| 3 | 10uF | Capacitor_SMD:C_0603_1608Metric | C1, C2, C17 |
| 2 | 15p | Capacitor_SMD:C_0603_1608Metric | C13, C14 |
| 2 | 1k | Resistor_SMD:R_0603_1608Metric | R3, R4 |
| 2 | 1uF | Capacitor_SMD:C_0603_1608Metric | C15, C16 |
| 2 | 27R | Resistor_SMD:R_0603_1608Metric | R1, R2 |
| 2 | Conn_02x18_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x18_P2.54mm_Vertical | J3, J4 |
| 1 | 100nf | Capacitor_SMD:C_0603_1608Metric | C7 |
| 1 | 10k | Resistor_SMD:R_0402_1005Metric | R5 |
| 1 | 12MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | NCP1117-3.3_SOT223 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | RP2040 | Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm | U2 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Molex_47346-0001 | J2 |
| 1 | W25Q128JVS | Package_SO:SOIC-8_5.3x5.3mm_P1.27mm | U3 |
The 30 most common of 34 parts.
Similar boards
- 2 layers181 × 97 mm
OpenDeck r3.1.2
shanteacontrols/OpenDeck
A platform for building interactive control and sensing devices using MIDI and OSC built with Zephyr RTOS.
262 parts960Apache-2.0 - 4 layers82.6 × 82.5 mm
- 4 layers102.9 × 96.7 mm
PicoGUS chipdown
polpo/picogus
Emulation of ISA sound cards and CD-ROM on Raspberry Pi Pico (GUS, SB/Adlib, MPU-401, Tandy, CMS, Panasonic CD-ROM) with USB mouse/joystick support
99 parts805 - 4 layers180.8 × 300.3 mm
Dilemma
Bastardkb/Dilemma
The Dilemma is a vertical stagger low-profile keyboard with mods.
383 parts590 - 2 layers130.4 × 76.6 mm
Gb stream cart
Staacks/gbinterceptor
Capture or stream Game Boy gameplay footage via USB without modifying the Game Boy.
80 parts542 - 2 layers78 × 60 mm
- 2 layers44 × 44 mm
Questions
How big is the RP2040 PCB?
It measures 65 × 52 mm and has 2 copper layers, 1.6 mm thick.
What parts does the RP2040 use?
34 parts, built around the RP2040 and W25Q128JVSIQ. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the RP2040 KiCad files?
From the MayuriDhekale/Project_9 repository on GitHub, at the commit this page was made from: the board is RP2040.kicad_pcb and its schematic RP2040.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the RP2040 design in my own project?
Its repository states no licence, so its author keeps all rights: ask MayuriDhekale before reusing the design.