
PSLab
fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io

A 3x3 macro pad with a rotary encoder and OLED display.
DoMo pcb is an open-source printed circuit board by MayTD, from the MayTD/DoMo-Macro-Pad repository on GitHub. It is a 2-layer board of 84.9 × 65.1 mm with 31 parts on 36 nets, routed with 326 tracks and 35 vias.
It is built around the WS2812B. Its parts include 14 diodes, 11 switches and 1 IC. It belongs with the lEDs and displays and keyboards and input boards and the AVR (ATmega, ATtiny) boards of this library.

DoMo is a 3x3 macro pad with a rotary encoder and OLED display. It's a straightforward design with a straightforward idea. I originally designed this for myself to provide quick access to most commonly used keys especially for programming. That means the top priority were to include shortcuts for copy and paste! However this can also be used just as any other macro pads for media controls to help improve workflow.
QMK: https://github.com/MayTD/qmk_firmware/tree/master/keyboards/domo
Note that source files only covers the PCB. Components must be assembled in order for the board to be functional or completed.
| Number of Parts | Component | Description |
|---|---|---|
| 1 | USB Cable | Depends on choice of microcontrollers |
| 1 | Pro Micro or Equivalent | Microcontroller that features USB connectivity on-board |
| 1 | Reset Switch | Switch to enter bootloader mode |
| 10 | Diodes | standard switching signal diode |
| 9 | Kailh MX Sockets | Hot Swapping Sockets which can support MX switches |
| 9 | MX switches | PCB supports PCB Mounted switches |
| 1 | Rotary Encoder | EC11, 5Pin, 6mm |
| 9 | Keycaps | Any keycaps of choice |
| 1 | Bottom Plate | PCB includes 4 mounting holes that could fit M2 screws |
| 4 | LEDS | Individual WS2812B 5050 RGB LEDs |
| 4 | 1x4 Connector | 4 pin male header |
| 1 | OLED Display | 0.91 128×32 Display Module |
| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | DIODE | Keebio-Parts:MD_Diode | D0, D1, D2, D3, D4, D5, D6, D7, D8, D9 |
| 9 | SW_Push | MX_Only:MXOnly-1U-Hotswap | SW2, SW3, SW4, SW5, SW6, SW7, SW8, SW9, SW10 |
| 4 | Hole | Mounting_Holes:MountingHole_2.2mm_M2 | H0, H1, H2, H3 |
| 4 | WS2812B | LEDs:LED_WS2812B-PLCC4 | LED0, LED1, LED2, LED3 |
| 1 | Conn_01x04 | Pin_Headers:Pin_Header_Straight_1x04_Pitch2.54mm | JOLED0 |
| 1 | ProMicro | Keebio-Parts:ArduinoProMicro | U0 |
| 1 | Rotary_Encoder_Switch | Keebio-Parts:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW1 |
| 1 | SW_Push | Buttons_Switches_THT:SW_PUSH_6mm | SW0 |

fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io

FrameworkComputer/ExpansionCards
Reference designs and documentation to create Expansion Cards for the Framework Laptop



PrintersForAnts/Micron
If you want to purchase full kits there are 3 available (Kits are slowly updating to R1 hardware just make sure to double check the included hardware in your kit and if you have any questions reach out in the discord)



It measures 84.9 × 65.1 mm and has 2 copper layers, 1.6 mm thick.
31 parts, built around the WS2812B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the MayTD/DoMo-Macro-Pad repository on GitHub, at the commit this page was made from: the board is PCB/DoMo-pcb.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask MayTD before reusing the design.